Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Melbourne
A new fence in Melbourne typically runs $3,500-$9,000, and the biggest variable is not material choice-it’s whether the quote includes the engineer-stamped wind-load design Brevard County requires for permits on anything over 6 feet. Most fence contractors serving Melbourne won’t mention that until the permit office rejects the drawings. We put the engineering in the written price up front, along with the inspection sign-off steps, so the quote you approve is the job that gets permitted. Call (470) 298-9650 for a free estimate on Fence Installation anywhere in Melbourne.
Why Rowan Construction Group Is Melbourne’s Preferred Fence Installation Company
Our crews have replaced fences from Eau Gallie to Suntree, and we know what the Melbourne permit office flags before we submit a single drawing. That matters because a fence over 6 feet in Melbourne’s 140-150 mph ultimate wind speed zone needs an engineer’s stamp-not a chat with the inspector. We bring the wind-load calculations, the material specs, and the signed scope to every installation. Grant Rowan founded this company in 2007 on a simple discipline: write the price before work starts, and never start a change without a signed change order. That’s why our Melbourne fence projects finish within a few percent of the agreed number. Scheduling is coordinated from our South FL office, and crews serve Melbourne locally.
We’re not the cheapest quote in Melbourne. We’re the quote that survives the building department. Under the 365-Day Done Right Promise, if a fence we install isn’t done right, we make it right-backed by The Haven Standard, not a handshake. Every visit includes a documented photo record of what we found and what we did, delivered to you before the crew leaves.
Our Fence Installation Services in Melbourne
Aluminum Fence Installation
Aluminum is the most common material we install in Melbourne, and the one most likely to hit permitting trouble. Off-the-shelf aluminum fence plans from inland I-4 suppliers often fail Brevard County review because they lack the wind-load engineering for Melbourne’s coastal design speeds. We spec schedule-40 posts, engineer-stamped wind calculations, and 30-inch embedment for every aluminum install we quote. Typical cost in Melbourne runs $4,000-$10,000. The compliant quote includes the engineering. The cheap quote leaves it out and waits for the permit office to catch it.
Vinyl Fence Installation
Vinyl fencing holds up well in Melbourne’s salt-humidity climate, provided the posts are set deep enough for the sandy coastal ridge soil and the rails use stainless-steel galvanized fasteners. A typical vinyl fence install in Melbourne runs $3,500-$9,000. We write the post depth, the fastener spec, and the wind-load rating into the scope of work so there’s no ambiguity about what you’re paying for. Homeowners in West Melbourne and the newer subdivisions west of I-95. Vinyl needs concrete footers that meet FBC embedment depth, and we document every footer depth with photos before backfill.
Wood Fence Installation
Wood fences in Melbourne fail faster than most homeowners expect-not from age, but from salt-laden air and fasteners that corrode within two hurricane seasons. Pressure-treated pine is standard, but the difference between a 5-year fence and a 20-year fence is the hardware. We use stainless-steel galvanized fasteners as a default, not an upgrade. Embedded posts get Sakrete high-strength concrete with the depth noted on the permit drawings. Typical wood fence installation in Melbourne runs within the $3,500-$9,000 range depending on linear feet and gate count.
Chain Link Fence
Chain link is economical and wind-transparent, which is why it’s still common around Eau Gallie and the older downtown core. The failure mode we see most is rust-through at ground level-salt moisture pools where the post meets the concrete. We specify schedule-40 posts and a corrosion-resistant coating on every Melbourne chain-link job. Fence repair with post replacement and wind-load sign-off typically runs $400-$2,500.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Melbourne
We install and repair fences from Sakrete, and our crews are trained on the material specs those brands publish for coastal installations. That matters in Melbourne because the fastener grade and post embedment a manufacturer recommends for inland Florida often falls short of what the wind-load math requires here. We carry the stock to match brand specs to local code. If you’re comparing quotes, bring us any written estimate and we’ll review it line by line at no charge under our Free Second Opinion offer.
Common Fence Installation Problems We See in Melbourne Homes
- Skipped engineer-stamped wind-load plans on aluminum fences. Contractors submit off-the-shelf drawings, the permit office rejects them, and the job stalls for weeks. A compliant Melbourne quote includes the engineering on day one.
- Wood fences built with non-galvanized fasteners. Salt-humidity air from the Indian River Lagoon corrodes standard hardware fast, and pickets start falling off within two hurricane seasons. We spec stainless-steel galvanized fasteners as the default.
- Posts set 18-24 inches deep in sandy coastal soil. Melbourne’s coastal ridge doesn’t hold shallow footers. After one heavy rain, posts lean or heave, and the homeowner discovers the change order was never in writing. We set posts to 30 inches and document the depth in the scope.
- Rusted-through chain-link posts at ground level. Salt moisture pools at the concrete interface and eats through standard posts. Schedule-40 replacements with corrosion-resistant coatings are the fix we recommend in Eau Gallie and the older core.
Pricing for Fence Installation in Melbourne, FL
Here’s what you should expect to pay for a compliant, permitted fence in Melbourne:
| Fence Type | Typical Melbourne Price Range |
|---|---|
| Vinyl Fence Installation | $3,500-$9,000 |
| Aluminum Fence Installation | $4,000-$10,000 |
| Fence Repair (post replacement, wind-load sign-off) | $400-$2,500 |
The engineering, the permit drawings, the inspection sign-off, and the documented photo record are in the written price. That’s the whole point of Clause 1 of the Haven Standard: the price is written before anyone starts. The estimate is free, and it’s not a ballpark. Call (470) 298-9650 and we’ll walk the property, measure the line, and give you a flat number with a written scope.
We Also Serve Cities Near Melbourne
Beyond Melbourne, our fence crews work in Kissimmee, Orlando, Lakeland, and Daytona Beach. If you’re in one of those cities and want the same documented, engineer-backed fence installation, call (470) 298-9650 and we’ll schedule a site visit. The wind-load math doesn’t change across Brevard County, but the permitting office does-and we know both.
Serving Melbourne, FL - Our Local Coverage Area
We’re based in the Melbourne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Melbourne
Yes, it really does. Melbourne sits in the 140-150 mph ultimate design wind speed zone, and the Florida Building Code requires wind-load engineering for permitted fences over 6 feet tall. That’s a Melbourne-specific trigger-inland I-4 cities like Lakeland or Kissimmee pass standard plans without review, but Brevard County will reject them. Call (470) 298-9650 if you want a quote that includes the engineering instead of one that waits for the rejection letter.
Increasingly, yes. If a fence fails in a named storm and you file a claim, the adjuster will often ask whether the fence was permitted and built to the wind-load standard for Melbourne’s design speed. If the answer is no, the claim gets harder to defend. Our Melbourne installations include the engineer’s wind calculations and the inspection sign-off in the documented record you receive, which is evidence you can hand to an adjuster without argument. Call (470) 298-9650 for a free estimate that includes that documentation.
Yes, and they come from the house side, not the fence side. Older concrete block stucco homes near Eau Gallie often have corroded or missing hurricane straps, and attaching a fence to the exterior wall can implicate the structural review the building department wants to see. We’ll assess the attachment point, check what’s behind the stucco, and write the scope so the fence doesn’t create a structural problem the house already has. Call (470) 298-9650 and we’ll put eyes on the wall before any drawings go in.
The cheap quote leaves out the engineer-stamped wind-load plan, the 30-inch post embedment, and the permitted inspection sign-off. That’s not a skill gap-it’s a line-item gap. The compliant Melbourne quote includes all three in the written price, and our scope of work lists each one so you can compare honestly. Under our Free Second Opinion policy, bring any competitor’s written estimate and we’ll review it line by line at no charge. Call (470) 298-9650 for the review.
It’s common, especially in Eau Gallie and older neighborhoods near the Indian River Lagoon, where salt-laden moisture pools at the concrete interface. The fix is schedule-40 posts with a corrosion-resistant coating set 30 inches deep and logged in the permit drawings. That repair runs $400-$2,500 in Melbourne depending on how many posts need replacement. Call (470) 298-9650 for an exact quote-estimates are free.
Contact Rowan Construction Group for Fence Installation in Melbourne
If you’re ready for a fence quote that includes the engineering, the permit drawings, and the inspection sign-off-not just a number-call (470) 298-9650 to schedule your free estimate. We’ll walk the property, measure the line, and hand you a written price with a written scope before anyone picks up a tool.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Melbourne, FL since 2007.
Fence Installation in Nearby Areas