Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across San Pedro
A new fence in San Pedro typically runs $3,500-$9,000 for vinyl and $4,000-$10,000 for aluminum, including materials, labor, and old-fence removal. That’s the honest range we write into contracts before any work starts, because the port’s salt air changes what fasteners, posts, and coatings actually hold up. Call (470) 298-9650 and we’ll walk the line with you, measure it, and put a number in writing that doesn’t move unless you sign for it to move.
We know San Pedro differently than a contractor who drives in from somewhere inland. The marine layer here isn’t a fog bank that burns off by ten. It sits on the harbor-side slopes off Paseo del Mar, it hangs over the Craftsman bungalows in Vista del Oro, and it keeps wood damp and metal working in ways that surprise most homeowners. Our Fence Installation team has pulled enough rotten posts out of San Pedro yards to know what the next five years will do to a fence built with the wrong hardware.
Rowan Construction Group, led by Grant Rowan, has been putting prices in writing since 2007. Over 4,000 projects later, the discipline hasn’t changed: a flat written scope, a written warranty, and a signed change order before anything outside the original quote proceeds. We serve San Pedro from our Los Angeles-area office, with crews scheduled locally and a live person answering the phone around the clock.
Why Rowan Construction Group Is San Pedro’s Preferred Fence Installation Company
San Pedro homeowners ask for the same thing, whether they’re on a bluff-top lot above the port or a flat street in Northwest San Pedro: they want to know the price before anyone digs a post hole. That’s Clause 1 of our Haven Standard, and it’s printed on every estimate. We don’t say “call for a quote.” We write the quote. It arrives as a flat-price document with a written scope, so you can screenshot it, compare it, and hold it against the final invoice.
Our reputation in San Pedro comes from the documentation we leave behind. Every visit includes a photo record, standard. Every change gets a signed change order, standard. Every crew member who shows up at your door is background-checked and uniformed. And if something isn’t done right, the 365-Day Done Right Promise means we make it right, backed by a terms page, not a handshake. Grant Rowan built that system because he knew that a fence warranty only matters if the company will still be around to honor it in three years when the salt air has done its work.
Our Fence Installation Services in San Pedro

Aluminum Fence Installation
Aluminum is a sensible choice for San Pedro properties with a view or a slope, but only when the hardware is right. Standard powder-coated aluminum rails and pickets hold their finish reasonably well, but the galvanized brackets and screws most installers use will pit and rust at the concrete interface within five to eight years. We specify stainless steel brackets and fasteners on any aluminum fence within sight of the Port of Los Angeles. That’s not an upgrade; it’s the baseline. In neighborhoods like South Shores and along Western Avenue, an aluminum fence set with marine-grade hardware will outlast a wood fence by decades and won’t rust-stain the concrete the way cheap galvanized anchors do.

Vinyl Fence Installation
Vinyl fences handle San Pedro’s damp better than wood, but there’s a catch. The dense marine layer accelerates plasticizer leaching from vinyl, which makes rails brittle and more likely to pop out of routed posts, especially on the harbor-facing western slopes. We’ve seen vinyl fences warp and unlock within a few years when installed with undersized rails or posts set too shallow. The fix starts before installation: deeper post settings in high-strength concrete, heavier-gauge vinyl, and full-length aluminum stiffeners inside the bottom rail. That combination runs the standard $3,500-$9,000 range for a typical San Pedro yard, and it means the fence won’t look wavy after two summers of fog.

Wood Fence Installation
A redwood or cedar privacy fence in San Pedro looks right against the older bungalows and Spanish Colonials that fill this city. But the marine moisture wicks up through the end grain of posts and rots them from the inside out, even when the visible part of the post looks solid. We address this at installation: pressure-treated posts set above the frost line in high-strength concrete with stainless steel post brackets, and pickets fastened with exterior-grade, rust-resistant screws rather than interior nails. On bluff-top lots along Paseo del Mar, we also slope the bottom rail of the fence to match grade so water doesn’t pool where wood meets concrete.

Chain Link Fence Installation
For a working yard or a dog run in San Pedro, chain link is practical and inexpensive. But the standard galvanized wire used inland will rust through quickly in this salt air. We specify zinc-aluminum coated chain link fabric, which resists the white rust and pitting that San Pedro’s marine layer causes. The same goes for the line posts, terminal posts, and tension bands. The price difference is modest when you’re doing the job once instead of replacing rusted fabric in six years.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in San Pedro
Rowan Construction Group sources from more than fifty vetted material brands, which means our written quotes reflect real numbers, not inflated ones. For San Pedro fence jobs, we regularly work with materials from companies like Cover and Abodu for pre-built panels, and we stock commonly needed replacement parts locally so repair turnaround doesn’t stretch out. When a San Pedro homeowner brings us a competitor’s written estimate, we’ll review it line by line at no charge and show you exactly where the numbers differ.
Common Fence Installation Problems We See in San Pedro Homes

- Posts sheared at the concrete line. Standard galvanized post anchors pit and fail within 5-8 years in San Pedro’s salt air, especially on the harbor-facing slopes. We replace them with stainless steel brackets and high-strength concrete.
- Rust-stained pickets from interior-grade fasteners. The marine layer keeps wood permanently damp on the west side of the peninsula, and nails or screws not rated for exterior salt exposure bleed rust down the face of the fence. We use marine-grade stainless or coated fasteners only.
- Wavy, unlocked vinyl rails. Salt fog leaches plasticizer from vinyl faster than inland, leaving panels that expand and pop out of routed posts. Full-length aluminum stiffeners and deeper posts stop the flex.
- Rot inside posts that look fine from the street. Moisture wicks up through end grain and can hollow out a redwood post while the outer face still looks passable. We probe posts during estimates and tell you what’s actually holding your fence up.
Pricing for Fence Installation in San Pedro, CA
Fence installation in San Pedro runs $3,500-$9,000 for vinyl and $4,000-$10,000 for aluminum, depending on the linear footage, slope, and what’s in the ground when we start. Old concrete from a previous fence, roots, and grade changes on bluff-top lots all affect the final number. What doesn’t affect it is guesswork. We measure the line, mark the post locations, and put the price in writing with a scope you can hold us to. If we open up the ground and find something that changes the work, nothing proceeds until you sign a change order with the new price written on it.
| Fence Type | Price Range in San Pedro |
|---|---|
| Vinyl Fence Installation | $3,500-$9,000 |
| Aluminum Fence Installation | $4,000-$10,000 |
Bring Rowan Construction Group a competitor’s written estimate for any of these scopes and we’ll review it line by line, free. You’ll see exactly where the numbers differ and why. Call (470) 298-9650 to schedule that review or to get your own written price.
We Also Serve Cities Near San Pedro

Most of our fence work keeps us along the Palos Verdes Peninsula and the Harbor Gateway, and we regularly run crews into San Pedro‘s neighboring communities. If you’re in Lakewood, Rancho Palos Verdes, Carson, or Long Beach, the same pricing discipline and marine-grade hardware standards apply. The salt air doesn’t stop at the city line.
Serving San Pedro, CA - Our Local Coverage Area
We’re based in the San Pedro area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in San Pedro

San Pedro’s marine layer is denser and sits lower than Torrance’s, and the harbor itself adds moisture and salt aerosol to the air. Standard galvanized posts and anchors pit at the concrete-to-air interface where salt fog condenses repeatedly. In San Pedro, that means shear-off failures within five to eight years; in Torrance, the same hardware might last a decade or more. We specify stainless steel or marine-grade polymer hardware on any fence in San Pedro within sight of the port to avoid that exact failure. Call (470) 298-9650 for a written quote that includes the right hardware, not the inland-spec version.
Fence replacement on a bluff-top lot along streets like Paseo del Mar often triggers additional city review because of slope stability and engineering requirements, especially if the fence sits near the bluff edge. A simple fence replacement in a flat yard usually doesn’t require a permit, but the bluff-top rules are different. Rowan Construction Group pulls permits when they’re required and coordinates with the city on slope-stable post settings as part of the written scope. Bring us a competitor’s estimate and we’ll tell you whether it accounts for the engineering, free.
Aluminum with a high-quality powder coat and stainless steel hardware lasts longest in San Pedro’s salt fog, followed by composite privacy panels on a powder-coated aluminum frame. Both resist the corrosion and rot that shorten the life of galvanized steel and wood. Vinyl also holds up, but it needs full-length aluminum stiffeners inside the bottom rail to prevent warp and unlock in the marine air. We’ll write a material recommendation into your estimate with the reasoning attached.
An untreated or interior-fastened wood fence on the harbor side of San Pedro can show post rot and picket failure within seven to ten years, and sometimes sooner on west-facing slopes off Paseo del Mar. The rot starts below grade where end grain sits in damp soil and the marine moisture stays in the wood. Pressure-treated posts set in high-strength concrete with stainless brackets extend that life considerably, but wood will always require more maintenance in San Pedro than aluminum or composite. The price range for a wood privacy fence reflects that: material choices and post depth make the difference between replacing it in eight years or twenty.
Yes. San Pedro’s housing stock includes a lot of Craftsman bungalows and Spanish Colonials from the 1920s through the 1940s, and many have original fence patterns that owners want to preserve. We’ve matched board-and-batten, lattice-top, and picket patterns on homes in Vista del Oro and Northwest San Pedro, using materials that echo the original profile but with modern marine-grade hardware underneath. Send us a photo of what’s there and we’ll tell you what’s salvageable and what a sympathetic replacement will cost, in writing, before any demo starts.
Written by Grant Rowan, Owner at Rowan Construction Group, serving San Pedro with written pricing since 2007.







Before
After
Before
After