Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Seaside
Fence installation in Seaside typically runs $3,500-$9,000 for a standard residential project, with aluminum fences landing between $4,000 and $10,000 and fence repair starting around $400. Those are the numbers we put in writing before anyone picks up a shovel. Rowan Construction Group has been quoting flat written prices since 2007, across more than 4,000 projects, and we bring that same discipline to every post hole we dig in Seaside.
If you live off Fremont Boulevard, up in the former Ord Military Community, or down toward Canyon Del Rey, call (470) 298-9650 and we’ll walk your fence line, measure it, and hand you a written scope with a written price. No phone quote, no ballpark guess, no surprises once the work starts.
One thing you should know before you dig anywhere in Seaside: this city sits on and beside the old Fort Ord Army base, and that changes fence installation in a way no neighboring town has to think about. We’ll get into that below because it’s the single biggest variable in your quote.
Why Rowan Construction Group Is Seaside’s Preferred Fence Installation Company
We work in Seaside regularly enough that our crews know the specific permitting realities of Monterey County and the City of Seaside Building Division. The biggest one: parcels inherited from Fort Ord, especially across the northern and eastern corridors and up in the OMC neighborhoods along General Jim Moore Boulevard, can carry mandatory unexploded ordnance (UXO) clearance requirements before any ground is disturbed. That means a fence post hole is sometimes a military-ordnance question, not just a dig. Most fence contractors on the Monterey Peninsula never deal with this. We do, and we know when to pull the trigger on the paperwork.
Our Fence Installation team also knows what the marine layer does to hardware here. Seaside’s salt-laden fog off Monterey Bay corrodes zinc-plated fasteners and standard gate hinges within 18 to 24 months, long before the fence panel itself shows wear. So we specify 316 stainless fasteners and powder-coated aluminum components on coastal-facing properties as the default, not the upgrade. That’s a local call we make before the quote is written, because replacing corroded hardware two years in is a warranty problem nobody should eat.
Every Rowan crew member is background-checked and uniformed, calls are answered by a live person 24/7, and every visit includes a documented photo record of what we found and what we did. When we finish a fence in Seaside, you get a written warranty attached to a real contract, not a verbal promise.
Our Fence Installation Services in Seaside
Aluminum Fence Installation
Aluminum is the smartest fence material for most Seaside lots, and we install more of it here than anywhere else in the county. The reason is simple: it doesn’t rust. A powder-coated aluminum panel with 316 stainless fasteners will outlast galvanized chain link by a decade in this fog belt. Aluminum fence installation in Seaside runs $4,000-$10,000 depending on linear footage, grade, and whether you’re adding gates.
Wood Fence Installation
Cedar and redwood both do well in Seaside if you spec the right posts. The failure point is rarely the board; it’s the post base sitting in fog-damp soil year-round. We set pressure-treated or steel-reinforced posts in concrete with a gravel base so water drains away instead of wicking up into the wood. On the small 1940s-60s tract lots that dominate Seaside’s housing stock, we also check lot-line setbacks carefully because many of those original fences were built inches off the true property line.
Chain Link Fence Installation
Chain link is the budget workhorse, and it still makes sense for Seaside’s backyards and side yards, especially where you just need to keep a dog in and don’t care about curb appeal. The cost difference comes down to galvanized versus vinyl-coated, and post depth. In the OMC neighborhoods, post depth can hit Army Corps soil-disturbance thresholds, so we check the parcel’s status before we quote, not after we dig.
Vinyl Fence Installation
Vinyl is the lowest-maintenance option we install, but it’s also the most wind-sensitive. Seaside gets real afternoon wind off the bay, especially up the open corridors near Canyon Del Rey and toward Sand City. If you want vinyl, we’ll recommend a thicker wall profile and stronger post spacing than you’d need inland. Vinyl fence installation in Seaside falls in the same $3,500-$9,000 range, and we’ll give you the exact number in writing before work begins.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Seaside
We install and repair fences across the common material lines you’ll see in Seaside’s supply yards, from standard pre-fabricated aluminum systems to custom steel and wood construction. Our sourcing depth across fifty-plus vetted material brands means we can quote actual prices on the specific panel, rail, and hardware your job needs, rather than padding a guess. For Seaside customers, we also keep a local stock of stainless fasteners, powder-coated gate hinges, and post anchors rated for coastal exposure, because running to a supply house in Salinas mid-job is how projects drag.
Common Fence Installation Problems We See in Seaside Homes
- Salt-fog hardware rot. Standard zinc-plated post anchors and gate hinges corrode within 18-24 months in Seaside’s marine layer. We see it constantly on fences that are only a few years old. The fix starts at spec: 316 stainless or powder-coated aluminum on every exposed fastener.
- Fort Ord UXO hold-ups. Digging post holes on a former Fort Ord parcel without the clearance paperwork can trigger a stop-work order from the Army remediation program. On affected parcels, a certified munitions specialist has to clear the line before any excavation. We handle that coordination, but it affects schedule and budget.
- Hidden electrical in older walls. Attaching a fence gate or post anchor to a 1940s-60s Seaside home’s stucco or framing can put a drill bit into knob-and-tube wiring or galvanized supply lines. We check before we fasten, because turning a simple gate hang into a permit-triggering repair is the last thing anyone wants.
- Undersized posts from original fences. Many original Seaside fences were built with 4×4 posts that have since rotted below grade. When we do fence repair, we pull the old post, inspect the hole, and set a properly treated or steel-reinforced replacement with drainage. The panel might be fine; the post usually isn’t.
Pricing for Fence Installation in Seaside, CA
A typical residential Fence Installation in Seaside runs $3,500-$9,000. Aluminum fence installation runs $4,000-$10,000. Fence repair starts at $400 and runs up to $1,800 for a full post replacement with concrete and grading work. What moves the number: linear footage, material choice, slope, the condition of what’s already in the ground, and whether your parcel falls in a Fort Ord UXO zone that requires clearance coordination. We write every one of those line items into your quote before any work starts, under Clause 1 of the Haven Standard. That’s a flat price with a written scope and written warranty. Not an estimate. A price.
| Service | Price Range in Seaside |
|---|---|
| Aluminum Fence Installation | $4,000-$10,000 |
| Fence Repair | $400-$1,800 |
We also offer a free second opinion on any written estimate. Bring us a competitor’s quote and we’ll review it line by line at no charge. You’ll see what’s in it that shouldn’t be, and what’s missing that will cost you later.
We Also Serve Cities Near Seaside
Along with Fence Installation in Seaside, Rowan Construction Group covers fence work in Monterey, Salinas, Watsonville, and Hollister. Pricing and permit realities shift once you’re outside the fog belt, and our quotes reflect the actual conditions of each city rather than a single county-wide price sheet.
Serving Seaside, CA - Our Local Coverage Area
We’re based in the Seaside area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Seaside
Only parcels that fall within the former Fort Ord boundary, most heavily concentrated across Seaside’s northern and eastern corridors and the OMC neighborhoods, carry mandatory UXO clearance requirements. Most of central and western Seaside is outside the affected zone. The City of Seaside Building Division and Army remediation program maintain parcel-level maps, and we check your parcel’s status as step one when we quote any project that involves digging. If your parcel is clear, no UXO coordination is needed. If it isn’t, we bring in a certified munitions specialist before any post hole goes in. Call (470) 298-9650 and we’ll tell you which category your property falls into before you spend a dollar.
In the Ord Military Community neighborhoods on Seaside’s east side, the Army Corps of Engineers screens any soil disturbance, and the practical threshold for a standard fence project depends on the specific parcel’s clearance status, not a one-size-fits-all depth. Standard fence posts run 24 to 36 inches deep, which is usually enough to trigger review on affected parcels. If you’re on a formerly restricted parcel, expect a site-specific health and safety plan to be part of the permit package, which adds time and cost but keeps the project legal. Call (470) 298-9650 for a parcel-specific answer on your property.
Aluminum fence installation in Seaside runs $4,000-$10,000 versus a lower range inland because of two local factors: the marine layer forces us to spec 316 stainless fasteners and powder-coated rail systems that won’t corrode in the salt fog, and many Seaside parcels require UXO clearance or older-lot inspections before we can dig. Salinas, being inland and on standard agricultural land, carries neither of those costs. You’re not paying a premium for the same fence; you’re paying for a fence built to survive Seaside’s specific conditions without rotting out its hardware in two years. Call (470) 298-9650 and we’ll show you the line items side by side.
Adding a fence gate usually doesn’t require a permit on its own in Seaside, but anchoring the post or hinge assembly into the wall of a 1940s-60s home can expose knob-and-tube wiring or original galvanized supply lines, and at that point the scope changes. Most of Seaside’s tract homes were built fast for Fort Ord families, and the walls hold things nobody has opened in sixty years. We inspect the attachment point before we drill, and if we find hazardous material or outdated wiring, the work stops until it’s handled properly. That’s a written change order signed before we touch anything. Call (470) 298-9650 for a free estimate on your gate.
Ask whether your parcel falls within the former Fort Ord UXO zone and if they have a documented clearance process for that. Most fence contractors in Monterey County have never heard of the requirement, and the ones who haven’t will dig anyway and risk a stop-work order from the Army remediation program. The second question is what fastener spec they use on exterior hardware. If the answer is anything less than stainless or powder-coated aluminum in Seaside, their fence will corrode before the warranty runs out. Call (470) 298-9650 and ask us both questions; you’ll get direct answers and a written price before any work starts.
If you’re ready to talk fence installation in Seaside, call (470) 298-9650 to schedule your free on-site estimate. We’ll walk the line with you, pull the parcel history, write the price in plain numbers, and hand it to you before anyone touches a shovel. No pressure, no countdowns, no “two spots left.” Just a written number you can screenshot, compare, and hold us to.
Written by Grant Rowan, Owner at Rowan Construction Group, operating under The Haven Standard since 2007.