Owens Corning Construction in Fort Worth, TX

Owens Corning Construction in Fort Worth, CA | Rowan Construction Group

We’re Rowan Construction Group, an independent Owens Corning in Arlington service provider working across Fort Worth. We install and repair Owens Corning roofing, insulation, and duct systems, and the thing that separates our work here is that we check the Barnett Shale easements on your lot before we touch anything else. If you need Owens Corning service in Fort Worth, call (470) 298-9650 for a free estimate.

Call (470) 298-9650

Why Fort Worth Residents Choose Us for Owens Corning Service

Grant Rowan founded Rowan Construction Group in 2007, and he trained in construction technology at Los Angeles Trade-Technical College, where the coursework covered framing, concrete, and project estimating. What that means on a Fort Worth job site is that we read the structural condition before we quote the material. We’ve spent years handling the specific mix of expansive clay soils, tornado-driven wind standards, and gas well easement constraints that define Fort Worth construction. We follow Owens Corning’s published installation specs for products like Duration shingles and FOAMULAR XPS, but we answer to the homeowner when it comes to repair-versus-replace decisions. If a 12-year-old Duration roof has failed because of improper flashing rather than shingle wear, we’ll tell you that. If the decking underneath is compromised, we’ll tell you that too, and we’ll price the full system honestly.

Every quote is a flat written price before work starts, per Clause 1 of the Haven Standard. Our crews are background-checked and uniformed. Every visit includes a documented photo record, so you see what we saw, in order, with captions explaining what it means. That’s the way we work across all seven of our trades. Measure twice, say it once, show your work.

Common Owens Corning Construction Problems We Solve in Fort Worth

• Granule loss and blistering on Duration shingles after hail impacts. Fort Worth sits in an active hail corridor, and the 2000 downtown tornado remains the reference point for local wind standards. After a storm strips granules off an Owens Corning Duration roof, the exposed fiberglass matting begins to degrade within weeks. Often the real damage is underneath: the underlayment is torn, or the decking has rot from a ridge vent that was improperly flashed. We remove the failed shingles, repair the substrate, and re-roof with Owens Corning material only when the system below it is sound.
• Compressive settlement of FOAMULAR XPS under post-tension slabs. Fort Worth’s Blackland Prairie clay shrinks aggressively during long, dry 100°F summers and heaves when the rains return. When rigid foam installed at grade compresses or shifts under a post-tension slab, gaps open at the perimeter that let air and moisture infiltrate. We address the placement discipline: the foam needs to sit on properly compacted, moisture-stable base, and the slab needs a proper separation layer. Skipping that step on Fort Worth clay is what causes the problem.
• PINK Next Gen Fiberglas batts losing R-value in older near-southside homes. In Fairmount and Mistletoe Heights, the early-1900s craftsman bungalows and Tudor Revivals often have wavy plaster walls and framing that has shifted over a century. When the framing moves, batts get compressed, and compressed fiberglass loses its thermal resistance. We remove the compressed batts, often supplement with blown-in Owens Corning where the cavities are irregular, and seal the air leaks that no amount of batt work will fix.
• QuietR duct board delaminating in unconditioned attics. Fort Worth’s summer humidity is brutal on duct systems installed without proper vapor barriers. QuietR duct board absorbs moisture, delaminates, and loses its structural integrity. We replace the failed sections with properly vapor-sealed Owens Corning duct board, and we inspect the entire duct run for other moisture entry points before we close up.
• Roof systems compromised by Barnett Shale easement staging constraints. This one is specific to Fort Worth. When a recorded gas line corridor cuts diagonally through a backyard, it forces crews to stage materials and debris containers inside a buildable setback. Out-of-town builders often discover this only when the title search comes back. We check for easements before the quote is written, and we plan the job around the no-build strip from day one.

Before

After

Owens Corning Service in Fort Worth: What Local Conditions Mean for Your Equipment

Fort Worth’s gas well setback ordinance, born from the Barnett Shale drilling inside city limits during the 2000s and 2010s, carves irregular no-build strips through otherwise buildable lots. Any Owens Corning roofing or insulation upgrade that adds eave overhangs, ridge vents, or exterior rigid foam bumps into these recorded pipeline easements. In practice, that means a straightforward roof replacement on a post-2000 home west or southwest of downtown can suddenly have a staging problem: the only accessible section of yard is reserved for a gas line corridor. We check the easement map before we write the quote. We plan staging around it, which sounds simple but catches out-of-town builders every single time. In the Fairmount neighborhood, our crew arrived at a 1920s craftsman bungalow on College Avenue after a spring hailstorm had stripped granules off a 12-year-old Duration roof, exposing fiberglass matting. We removed the failed shingles, repaired three sections of rotted decking caused by a ridge vent that had been improperly flashed, and installed new Owens Corning Duration Storm shingles with a synthetic underlayment rated for Fort Worth’s wind zone. The homeowner had a recorded gas line easement cutting diagonally across the backyard, so we kept all staging and debris containers inside the buildable setback while we worked.

Owens Corning Models & Products We Service in Fort Worth

We work with the full Owens Corning line: Duration Series shingles (including Duration Storm, rated for the wind and hail conditions Fort Worth sees), FOAMULAR XPS rigid foam insulation, PINK Next Gen Fiberglas insulation, and QuietR duct board. For a localized repair where the rest of the system is intact, we use Owens Corning OEM shingles, insulation, and duct board, and we keep the common sizes stocked locally so Fort Worth turnaround doesn’t stall waiting on freight. But we will not overlay a new Owens Corning roof over failing decking or a compromised underlayment just to keep the brand uniform. For replacements, we price the full Owens Corning system: decking, underlayment, shingles, ridge vent. And we’ll tell you plainly when a lower-cost aftermarket underlayment will perform just as well under Fort Worth’s hail and wind loads. If you’re deeper in the metro, our Owens Corning sales & service line covers the same ground.

Owens Corning Service Pricing in Fort Worth

FAQs - Owens Corning Construction in Fort Worth

Service Areas Near Fort Worth

Beyond Fort Worth proper, we serve the surrounding Dallas-Fort Worth corridor and can extend to select areas of Dallas, Arlington, Irving, Plano, and Frisco. If you’re outside Fort Worth but need Owens Corning work in the broader metro, call us and we’ll confirm coverage. We also run Fort Worth service area coverage that includes the near-southside historic districts. For neighbors to the west, see our Owens Corning service in Fresno page, and for Northern California, our Owens Corning service in Sacramento page applies.

Book Your Owens Corning Service in Fort Worth Today

Call (470) 298-9650 to schedule your free estimate. We’ll put the price in writing before any work starts. If it’s a storm-damage emergency, tell us when you call and we’ll work the schedule to get a crew there.

Written by Grant Rowan, Owner at Rowan Construction Group, serving Fort Worth since 2007.