CWS Construction in Arlington, TX

CWS Construction in Arlington, CA | Rowan Construction Group

We’re Rowan Construction Group, an independent CWS construction team serving Arlington homeowners since 2007. We specialize in CWS cabinetry and millwork lines installed in the boom-era tract homes that dominate this city, from 1960s ranch kitchens to 1990s post-tension slab builds. The one thing that makes our CWS work different here: we understand what Arlington’s Blackland Prairie clay does to cabinetry over time. Call (470) 298-9650 for a written estimate before any work starts.

Call (470) 298-9650

Why Arlington Residents Choose Us for CWS Service

Most contractors in Arlington know framing or roofing. Few know what happens to a CWS Classic Oak cabinet door after three consecutive drought summers pull moisture from the air and the slab beneath it shifts. We do, because we’ve been pulling original CWS cabinet specs and matching finishes in this city for nearly two decades.

Grant Rowan founded this company after training in construction technology at Los Angeles Trade-Technical College, where he learned framing, concrete, and estimating before swinging a hammer on a paying job. That discipline carries through every CWS job we take: measure the existing cabinet run, match the reveal, document the condition of the substrate, and write down what we found. Not what we felt about it.

We’re an independent contractor, not manufacturer-affiliated or authorized by CWS. That independence means we default to what’s actually best for your kitchen: OEM CWS hinges where matching the original overlay matters, and honest aftermarket soft-close upgrades when a client tells us they want a modern feel. We stock CWS-compatible hinges, drawer glides, and door bumpers locally so Arlington jobs don’t stall waiting on parts.

Every crew member is background-checked and uniformed. A live person answers our phones 24/7, and every visit includes a documented photo record as standard, not an add-on. Under Clause 1 of the Haven Standard, you get a written price before anyone picks up a tool.

Common CWS Construction Problems We Solve in Arlington

• Thermofoil delamination on CWS cabinet doors and drawer fronts. Arlington’s heat and humidity cycles are brutal on thermofoil, and the 80s and 90s CWS Designer White Series is particularly susceptible. The laminate separates from the MDF core, usually starting at the bottom edge of drawer fronts. We repair solid wood CWS frames whenever possible and recommend replacement only when delamination exceeds 50% of the face.
• Hinge screw pullout in CWS particleboard cabinet sides. When Arlington’s clay soil shrinks in drought and heaves in wet winters, it racks the wall framing. That racking translates to repeated stress on hinge screws anchored in particleboard. Once those screws strip, the cabinet side needs a structural repair, not just a bigger screw. We use hardwood dowels or engineered repair plates, then re-mount with the correct CWS hinge.
• Warped cabinet frames and misaligned doors after slab heave. Post-tension slabs aren’t immune to Blackland Prairie movement; they just move differently. When the slab drops a fraction of an inch on one side of the kitchen, the cabinet run racks with it. We shim and re-secure boxes with structural anchors, then re-align every door to a consistent reveal.
• Faded or cracked laminate finishes on CWS countertops and end panels. Arlington’s intense Texas sun fades laminate fast, especially on south-facing kitchens. Where the laminate has merely faded, we often recommend refacing rather than replacement. Where it’s cracked through to the substrate, replacement is usually the honest answer.
• CWS European Hinge Series failures on 1990s post-tension slab builds. The original European hinges CWS used on their framed cabinetry were compact and adjustable, but many have worn clip mechanisms after 30 years of Arlington’s seasonal movement cycles. We stock OEM-compatible replacements and can usually swap them same-visit.

Before

After

CWS Service in Arlington: What Local Conditions Mean for Your Equipment

Here’s what makes CWS cabinetry work in Arlington genuinely different from neighboring cities: Arlington’s 1980s and 1990s subdivisions are dense with post-tension cable slabs. That matters for cabinet work because any kitchen island installation, countertop anchoring, or cabinet removal that requires penetrating the slab means locating and avoiding live tensioned cables first. Our crew pulls the original slab engineering drawings before any penetration work in an Arlington home of that era. Cutting an unlocated tendon is a genuine jobsite hazard, and Arlington’s building department inspectors specifically flag it because they’ve seen enough incidents. This is far less common across the older pre-1975 neighborhoods in east Fort Worth Cws service areas or south Dallas, where homes predate widespread post-tension construction. If you’re in an Arlington home built between 1980 and 2000, assume that slab has tensioned cables until the drawings prove otherwise. We treat that assumption as standard practice on every CWS kitchen job we quote.

CWS Models & Products We Service in Arlington

We service the full range of CWS cabinetry lines installed in Arlington homes from the 1960s through the 1990s. That includes the CWS Classic Oak Series, common in 1960s and 70s ranch kitchens; the CWS Designer White Series, prevalent in 1980s and 90s split-levels; CWS Custom Framed Cabinetry, typically found in higher-end builds of the same era; and the CWS European Hinge Series hardware used across many of these lines. Our OEM-compatible parts approach means we match original reveals and overlays on hinges, drawer glides, and door bumpers, while offering quality aftermarket soft-close hardware when clients want a modern upgrade. We keep common CWS-compatible parts stocked locally for fast Arlington turnaround, and we bring the photo record and written scope with us when we leave. For broader CWS product lines and equipment beyond cabinetry, our team can also refer you to CWS sales & service resources.

CWS Service Pricing in Arlington

FAQs - CWS Construction in Arlington

My CWS cabinets have thermofoil peeling off the doors - can you fix that without replacing the whole kitchen? In most cases, yes. If the delamination is under 50% of the door face, we can strip, re-laminate, or reface the affected doors and drawer fronts. If it’s spread beyond that, replacement of the affected doors, not the entire kitchen, is usually the right call. We’ll show you the photo record so you can see exactly what we found. Call (470) 298-9650 for a written estimate.

Do you have to pull the slab drawings before installing a kitchen island in my 1990s Arlington home? Yes. Arlington’s 1980s and 1990s subdivisions sit heavily on post-tension cable slabs, and any penetration for island anchoring, countertop support, or cabinet removal is a risk if the cables are not located first. We pull the original slab engineering drawings before any penetration work. Cutting an unlocated tendon is a genuine jobsite hazard and can compromise the slab’s structural integrity.

My CWS cabinet doors are out of alignment after the drought - is that a foundation problem? It often is, here in Arlington. The Blackland Prairie clay under this city shrinks during drought and heaves in wet winters, which can drop one side of the kitchen slab and rack the cabinet run with it. We had a job on San Mateo Drive in Woodland West where the slab dropped nearly an inch on one side. We shimmed and re-secured the boxes with structural anchors, replaced the stripped OEM hinges with upgraded soft-close units, and re-aligned every door. The job held through the next wet winter’s heave. We’ll assess whether your cabinet movement is foundation-driven or hinge-driven when we inspect, then show you the photo record of what we found.

Can you match my original CWS Classic Oak finish when you reface the cabinets? Yes. We keep finish-matching samples for the CWS Classic Oak Series, and we’ve matched original 1960s and 70s honey-oak tones for Arlington kitchens across the city. The goal is that the refaced doors blend with the original boxes and end panels, not stand out as obvious replacements. We’ll show you the finish sample against your existing cabinets before we write the quote.

Are CWS hinges still available, or do you have to use generic replacements? OEM-compatible CWS hinges are still available and we keep the common ones stocked locally. We default to OEM for hinge replacements because they match the original reveal and overlay. Where a client wants soft-close feel, we’ll recommend a quality aftermarket soft-close unit that fits the CWS bore pattern. The choice is yours, written in the quote either way. Call (470) 298-9650 and we’ll bring both options to the estimate.

Service Areas Near Arlington

We serve Arlington and the surrounding metro, including Los Angeles, Houston, San Antonio, and San Diego. If you’re outside our Arlington service area, our Arlington service area page covers the full list of nearby neighborhoods we reach. We also provide CWS service in Tampa and CWS service in Anaheim for clients with properties in those markets.

Book Your CWS Service in Arlington Today

If your CWS cabinets are delaminating, racking, or pulling away from the wall, we’ll document what we find and write you a flat price before any work starts, just as we do for Fence Installation in Arlington. Measure twice, say it once, show your work. Call (470) 298-9650 for your free CWS estimate in Arlington.

Written by Grant Rowan, Owner at Rowan Construction Group, serving Arlington since 2007.