Therma-Tru Construction in Orlando, FL

Therma-Tru Construction in Orlando, CA | Rowan Construction Group

Rowan Construction Group provides independent Therma-Tru door installation, repair, and replacement across Orlando, from Pine Hills CBS ranches to Horizon West townhomes, and we also offer Tampa Therma Tru service for properties outside the immediate metro area. We are not a manufacturer-authorized dealer, and we say that plainly because it matters: we choose parts based on what fixes your door, not what a factory program requires us to sell. The one thing that makes our Therma-Tru work different here is that we file tourism-district paperwork in parallel with building permits, so an I-Drive hotel door swap doesn’t stall for two weeks while vendor credentialing catches up. Call (470) 298-9650 for a written quote before any work starts.

Call (470) 298-9650

Why Orlando Residents Choose Us for Therma-Tru Service

We’ve worked on every major Therma-Tru line sold in Central Florida since the 1990s: Smooth-Star fiberglass entry doors, Classic-Craft and American Style wood-grain slabs, Pulse sliding patio doors, and Benchmark steel and fiberglass units. That matters because a 1995 Benchmark door fails differently than a 2018 Smooth-Star, and knowing which you have before we arrive saves you a second trip charge. Grant Rowan, our owner, trained in construction technology at Los Angeles Trade-Technical College, where the curriculum was framing, concrete, and estimating. He brought that estimating discipline with him: you get a written price, a written scope, and a written warranty on every Therma-Tru job. No verbal ballparks. No “we’ll figure it out as we go.” Under Clause 1 of our Haven Standard, the price is written before anyone picks up a tool.

We are local to Orlando service area and we know what a 1964 concrete-block rambler in Pine Hills does to a door opening when termite damage settles the floor joists. We know what west-facing afternoon sun does to fiberglass slabs in Conway. And we know which permits Orange County’s tourism district wants before a hotel corridor gets touched.

Common Therma-Tru Construction Problems We Solve in Orlando

• Warped or sagging fiberglass door slabs on west-facing exposures. Orlando’s afternoon heat plus daily summer convective storms create thermal cycling that older Smooth-Star and Classic-Craft panels were never rated for. The slab flexes, the latch side drifts, and you’re fighting the deadbolt every evening. We re-hang and re-shim, or pull the slab and set a direct Therma-Tru replacement when the warp exceeds factory tolerance.
• Wood-edge rot along door bottoms on older CBS homes. In College Park and Conway, settled thresholds trap stormwater against the weatherstrip, and the wood edge of an otherwise solid fiberglass door goes soft in two or three seasons. We cut the bad edge, rebuild with pressure-treated stock, and re-flash the threshold so water drains away from the slab instead of into it.
• Failed multi-point locks and misaligned hinges on Pulse patio doors. The 1990s tract homes across Orlando’s outer suburbs are now cycling into their first major renovation wave. Pulse series sliding doors from that era are at the end of their hardware life. We replace roto multi-point locks, swap worn rollers, and true the panel so it seals flat against the frame.
• Brittle or cracked corner seals after hurricane-force wind loads. Hurricane Ian put sustained tropical winds through inland Orlando that older non-impact-rated Therma-Tru units were never engineered to handle, and the corner seals on fiberglass panels took the punishment. We inspect post-Ian doors for hairline cracking, and when the panel is compromised, we recommend impact-rated replacement rather than a cosmetic patch.
• Rusted bottom panels on 1990s Benchmark steel doors. Benchmark was Therma-Tru’s contractor-grade line for years, and the steel version is prone to rust at the bottom rail once the factory weatherstrip gives out. We can replace the slab with a direct Therma-Tru equivalent at a fraction of a full-frame tear-out cost.

Before

After

Therma-Tru Service in Orlando: What Local Conditions Mean for Your Equipment

Here is the thing no generic Therma-Tru page will tell you. Orange County’s tourism-district permitting on International Drive requires door installations and replacements to pass Disney or Universal vendor credentialing. That’s a two-week paperwork buffer that doesn’t exist in Tampa or Jacksonville. A hotel maintenance director can’t just call any contractor to swap a Therma-Tru front door on an I-Drive property; the contractor has to be in the vendor system, or the permit sits in review while the door leaks conditioned air into a Florida afternoon. We’ve spent years on Therma-Tru sales & service work along that corridor. We file the credentialing paperwork at the same time we pull the building permit. That single habit has saved property managers more time than any tool on our truck.

It’s a bureaucratic layer that filters out general contractors without hospitality-sector experience, and it means the Therma-Tru tech who shows up on I-Drive is not the same tech who chases a Pulse patio door in Lake Nona. The door is the same. The paperwork isn’t.

Therma-Tru Models & Products We Service in Orlando

We carry current Therma-Tru OEM weatherstrip, thresholds, hinge sets, and lock stiles for all of these lines:

• Smooth-Star fiberglass entry doors - smooth-skin slabs, the workhorse of Orlando’s 1980s-2000s residential builds.
• Classic-Craft and American Style series - wood-grain fiberglass with raised panels; common in College Park and Conway’s better-kept CBS homes.
• Pulse series sliding patio doors - the multi-point lock hardware on these fails first, and we stock the roto sets.
• Benchmark by Therma-Tru - contractor-grade steel and fiberglass; the 15-20-year-old units where slab replacement almost always beats repair.

We always start with OEM parts to keep the factory fit. When OEM panels are no longer in production, which happens a lot on old Benchmark doors, we spec a direct Therma-Tru equivalent and write the part numbers in your quote so you can check the spec yourself. Measure twice, say it once, show your work.

Therma-Tru Service Pricing in Orlando

FAQs - Therma-Tru Construction in Orlando

Service Areas Near Orlando

We serve most of Central Florida within a reasonable drive of Orlando, including work in communities that share Orlando’s concrete-block housing stock and post-1990s tract build patterns. If you’re near Therma-Tru service in Chula Vista or Therma-Tru service in St. Petersburg, our crews can quote that work as well. We also field calls from homeowners in Los Angeles, San Antonio, and San Diego who own rental properties in Orlando and want a written price before they authorize a door replacement across state lines.

Book Your Therma-Tru Service in Orlando Today

A Therma-Tru door that won’t latch is a security problem, not a cosmetic one. If you’re in Orlando, call (470) 298-9650. We’ll schedule a walk-through, document the condition of your door with photos, and give you a written flat price before any work begins. The 365-Day Done Right Promise covers it: if it’s not done right, we make it right, in writing.

Written by Grant Rowan, Owner at Rowan Construction Group, serving Orlando since 2007.