A backyard with a new horizontal privacy fence
Ameristar · Fort Worth, TX

Ameristar Construction in Fort Worth, TX

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A new wood side gate with black hardware
A new white vinyl privacy fence with a double gate
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
New double-hung windows in a dining room
A new paver pool deck
An open kitchen and dining area after a remodel
A freestanding soaking tub in a remodeled primary bathroom
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Ameristar Construction in Fort Worth, CA

Rowan Construction Group provides independent Ameristar sales, service, and installation across Fort Worth, and the one thing that separates our Ameristar work here is this: we plan every condenser placement, lineset run, and slab pour around what lies beneath the grass. In Fort Worth, that often means a recorded Barnett Shale gas well setback or pipeline easement that Dallas or Ameristar in Arlington contractors never have to think about. If you need Ameristar equipment installed, repaired, or replaced and you want a crew that reads the title work before the trenching starts, call (470) 298-9650.

Call (470) 298-9650

We’re not an Ameristar-authorized dealer. We’re an independent service provider who works on their equipment daily across Fort Worth’s clay-heavy slabs, hail-prone roofs, and gas-well-dotted subdivisions. That independence means we answer to you, not to a manufacturer’s sales quota. For Ameristar sales & service done with local due diligence, we’re the crew Fort Worth homeowners call when the cheap quote misses an easement.

Why Fort Worth Residents Choose Us for Ameristar Service

A new stained cedar privacy fence

We’ve been running Ameristar equipment in this city long enough to know which units hold up under Blackland Prairie clay movement and which ones don’t. Measure twice, say it once, show your work. That’s how we approach an Ameristar condenser sitting three feet from a gas well buffer as much as a kitchen remodel.

Every Ameristar job we take in Fort Worth starts with a written scope and a flat price before anyone touches a tool. Under Clause 1 of The Haven Standard, the price is written before anyone starts. We source OEM Ameristar parts through wholesale distributors when availability allows, and when a board or motor is discontinued, we use proven aftermarket equivalents that match electrical ratings and we tell you exactly what we’re installing and why. You get a documented photo record on every visit, included, not optional. And our Done Right Promise means if it isn’t done right, we make it right.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Ameristar Construction Problems We Solve in Fort Worth

Hail, clay, and power surges in quick succession. Those three things break Ameristar equipment in Fort Worth faster than anywhere else we work. Here’s what we see most often:

  • Condenser coil corrosion from alkaline clay dust. Fort Worth’s Blackland Prairie clay is alkaline and fine as flour. In older neighborhoods like Fairmount and Mistletoe Heights, unpaved alleys kick up dust that infiltrates Ameristar M4AC3 condenser fins and accelerates coil corrosion. We see fins pitted white on the windward side long before the compressor gives out.
  • M4GC3 furnace control board failures after power surges. Hail-season outages in Fort Worth are brief but brutal, and the surge when power snaps back on bricks the control board on Ameristar M4GC3 gas furnaces with alarming regularity. We keep replacement boards on hand because we know the pattern.
  • Drain pan cracks on attic-installed M4AH4 air handlers. Fort Worth summers push 100°F into your attic for weeks, then December dips below freezing. That thermal flexing cracks plastic drain pans on Ameristar M4AH4 handlers mounted in attics, and the first sign is a water stain on the ceiling below.
  • Capacitor and contactor wear from tornado-season load shedding. Rolling brownouts during storm season cause hard-start failures on Ameristar capacitors and contactors. When the voltage sags under load-shedding events, the compressor tries to start too many times and the cap gives up. We diagnose this with a meter, not a guess.
  • Post-tension slab movement stressing lineset connections. Fort Worth’s expansive clay shrinks in summer and heaves in spring. That movement transfers stress to refrigerant linesets run under slabs, and we’ve found micro-fractures at braze joints on Ameristar M4HP5 heat pumps where the slab settled a quarter inch. It’s a Fort Worth problem, not an Ameristar defect.

Ameristar Service in Fort Worth: What Local Conditions Mean for Your Equipment

Here’s the thing no generic Ameristar guide will tell you: Fort Worth is the only major Texas city where a residential lot can carry a recorded Barnett Shale gas pipeline easement or a gas well setback buffer. That means your new Ameristar M4AC3 condenser, a planned home addition with a second HVAC zone, or even a simple lineset replacement might have to jog around a subsurface no-build strip that builders in Dallas, Arlington, or even Houston never encounter. When you’re pulling permits in west or southwest Fort Worth neighborhoods built after 2000, the title search routinely returns recorded easements that carve irregular strips through what looks like a standard lot. We treat that check as routine. Out-of-town contractors consistently miss it until the inspection fails. On a home addition in the Ridglea Hills area, the local pro found an unmarked 8-foot gas well setback along the west lot line that forced us to shift the new Ameristar M4AC3 condenser six feet east, then re-route the refrigerant lineset under a post-tension slab, pressure-testing with nitrogen before tying into the existing M4GC3 furnace in the attic. That’s the difference between a contractor who works in Fort Worth and one who just happens to have a Fort Worth phone number.

Ameristar Models & Products We Service in Fort Worth

We service the full Ameristar line that shows up in Fort Worth homes: the 14 SEER M4AC3 Series condensers, M4GC3 gas furnace line, M4AH4 air handlers, and M4HP5 heat pumps. For discontinued boards and motors where OEM stock has dried up, we use aftermarket equivalents that match electrical ratings, and we tell you the difference before we install anything. When a compressor or heat exchanger fails, we’ll show you the numbers on repair versus replacement and let you decide. We stock common M4GC3 control boards, capacitors, contactors, and drain pans locally so most Fort Worth service calls don’t wait on a parts shipment.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Ameristar Service Pricing in Fort Worth

A wood double vanity with two mirrors after a bathroom remodel

Two line-items matter most on this page, and here they are in writing:

Service Price Range
Home Addition (with new Ameristar HVAC zone) $45,000 - $130,000
Roof Repair (storm, hail, or flashing work around rooftop Ameristar equipment) $400 - $1,800

The precise number depends on easement setbacks, slab condition, equipment access, and permit fees, but you’ll never get a vague “call for a quote” from us. Every estimate is a flat written price with a written scope. Call (470) 298-9650 to schedule your free estimate, and bring a competitor’s written quote if you have one. We’ll review it line by line at no charge.

Serving Fort Worth, TX - Our Local Coverage Area

We’re serving the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs - Ameristar Construction in Fort Worth

Service Areas Near Fort Worth

We serve Fort Worth and the surrounding metro, including Fort Worth service area communities from Arlington to Benbrook, plus our other brand-focused pages for Ameristar service in Fresno and Ameristar service in Sacramento. If you’re on the Fort Worth side of the metroplex and want a contractor who reads the easements before the plans, we’re the call to make.

Book Your Ameristar Service in Fort Worth Today

If you need Ameristar repair, replacement, or an addition that includes a new HVAC zone, call (470) 298-9650 for Fort Worth Fence Installation and other construction services. We’ll schedule your free estimate, document everything in writing, and give you a flat price before anyone picks up a tool.

Written by the team at Rowan Construction Group.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A standing-seam metal roof over a covered porchA new bay window with a cushioned seatA new concrete driveway with a paver borderA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanityA garage converted into a guest room and home office

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Roofing

Shingle, tile and metal roofs over new underlayment and flashing, with new gutters and a full clean-up.

Explore roofing

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Fort Worth? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate in Fort Worth

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch