Jerith Construction in Houston, TX

Jerith Construction in Houston, CA | Rowan Construction Group

We provide independent Jerith aluminum fence installation, repair, and rebuild service across Houston, from the Heights to Katy. The one thing that makes our Jerith work here different: we plan every fence around two Houston-specific pressures that most contractors miss entirely - the expansive black clay that heaves post footings out of level, and the fact that Houston has no traditional zoning code, so setbacks come from deed restrictions and Chapter 42 lot lines instead of a city map. Call (470) 298-9650 for a written price before any work begins.

Why Houston Residents Choose Us for Jerith Service

Rowan Construction Group has installed, repaired, and rebuilt Jerith aluminum fencing across Houston’s pier-and-beam bungalows and slab-on-grade subdivisions for over a decade. We know the Residential Aluminum line, the Industrial series, the Estate Collection, and the Garden Series - and more importantly, we know how each one behaves after three Houston summers of clay movement and humidity cycles. We’re not manufacturer-authorized, and we’re upfront about that. What we are is independent, which means we can tell you honestly when a sectional splice will hold and when a full panel replacement is the smarter money. We also source genuine Jerith posts, pickets, rails, and hinge hardware for every structural repair, so the powder-coat match and wind-load rating stay intact. Grant Rowan grew up in the Crenshaw district and trained at Los Angeles Trade-Technical College, where the coursework was framing, concrete, and estimating - the exact skills that matter when you’re resetting fence posts in Houston clay instead of just bolting panels on and hoping.

Common Jerith Construction Problems We Solve in Houston

Here’s what actually goes wrong with Jerith aluminum fence in Houston, based on what our crews find when they walk the line:

• Gate posts leaning out of plumb within 18-24 months in Katy and Pearland. The expansive clay heaves concrete footings upward unevenly as it cycles through wet and dry spells. The post base and hinges bind, and the gate stops swinging full-arc. We excavate, reset with 30-inch concrete piers and rebar cages, and re-hang the gate so it clears from full open to full close.
• White powdery corrosion at bottom rails and picket-to-rail joints in Sugar Land and Clear Lake. Lawn irrigation sprays the fence line routinely, and even Jerith’s powder coat breaks down after enough wetted cycles at the joinery. We see surface oxidation first, then pitting at the aluminum substrate. When more than 20% of the fence shows powder-coat failure, we recommend full panel replacement over sectional splicing.
• Wind-uplift on tall 6-foot sections in Friendswood and Meyerland. Sustained 60+ mph gusts during hurricane events find every shallow footer. Original installs with 24-inch footings tilt or lift at the post sleeves. We reset those posts at 30 inches minimum and verify the fasteners against Jerith’s wind-load spec before the fence goes back together.
• Double-drive gate sag at the center drop rod on suburban lots. Two-post drive gates across a wide curb cut are where independent clay movement shows up first. Each post shifts on its own schedule, so alignment drifts at the center drop rod and the gate won’t latch. We true the posts, shim the hinges, and reset the drop rod so both leaves meet square.
• Bottom rails split at the post sleeves after years of clay heave. This is the post-Harvey signature on older Jerith installs - the rails crack right where they enter the post, because the panel was holding the post instead of the other way around. We replace the rail sections with genuine Jerith stock and re-anchor the posts so the panel floats properly.

Before

After

Jerith Service in Houston: What Local Conditions Mean for Your Equipment

Houston is the only major U.S. city without traditional zoning, and that single fact shapes every Jerith fence we touch. Property setbacks for a fence are defined by deed restrictions, Chapter 42 lot-platting rules, and HOA covenants - not a zoning map. In neighborhoods like West University Place and Bellaire, that means we pull the recorded plat and the restrictive covenants before we order a single panel. A fence placed six inches off the recorded building line triggers a city stop-work order that does not exist in Dallas or San Antonio. The homeowner pays to move the fence, and in some cases pays a fine on top. We have seen it happen. So when we quote a Jerith installation in Houston, the first line item is not materials - it’s the lot-line verification. That’s the information-gain difference: every other contractor’s Jerith page tells you about powder coat and picket spacing. This one tells you why your fence has to be platted before it’s placed.

Jerith Models & Products We Service in Houston

We work on the full Jerith residential range: the standard Residential Aluminum Fence in 4-6 foot heights, the Industrial and Commercial series used for pool and perimeter duty, the Estate Collection with spear tops and finials, and the Garden Series for ornamental landscaping runs. For structural repairs we always source genuine Jerith posts, pickets, rails, and hinge hardware to preserve the powder-coat match and the wind-load rating. For non-visible fasteners and concrete we use spec-grade aftermarket anchors and 4000 psi high-early mix to speed post resetting without losing strength. We stock common Jerith components and fasteners at our local yard for faster Houston turnaround, but we order panel runs to spec every time - meaning we don’t cut corners by keeping odd lots on hand.

Jerith Service Pricing in Houston

FAQs - Jerith Construction in Houston

Does Houston’s ‘no zoning’ rule change where I can put a Jerith aluminum fence on my property?

Yes. Houston has no traditional zoning code, so your fence setbacks are controlled by your deed restrictions, HOA covenants, and Chapter 42 lot-platting lines instead of a city zoning map. In neighborhoods like West University Place or Bellaire, that means we pull the recorded plat and restrictive covenants before ordering materials. Call (470) 298-9650 and we’ll walk your lot line with you as part of the estimate.

Can a Jerith aluminum fence survive black clay soil movement in Katy or Pearland?

It can, but the installation method matters more than the fence itself. Standard 18-24 inch footings will heave unevenly in Katy and Pearland clay, which is where leaning gate posts and split rails start. We reset posts at 30 inches minimum with rebar cages and high-early concrete so the post stays plumb even when the clay moves seasonally.

Do I need to elevate my Jerith fence if I live in Meyerland or Friendswood after the FEMA remap?

No, unless your fence is tied into a structure that’s being elevated. The City of Houston’s substantial improvement rule applies to buildings, not to aluminum fence. What does change in Meyerland and Friendswood is the practical reality: repeated flood cycles and post-Harvey clay movement mean we open the post bases, check for erosion and heave, and reset any post that’s moved out of level.

How do I fix a Jerith double-drive gate that sags in the middle on my Clear Lake lot?

First, we pull the gate leaves and true the posts, because the sag is almost always the clay shifting each post on its own schedule. Then we shim the hinges, reset the drop rod, and re-hang the gate so both leaves meet square at the center. Call (470) 298-9650 and we’ll quote the fix as a flat written price before any work starts.

Does Rowan Construction Group use genuine Jerith parts for fence repairs, or aftermarket?

We use genuine Jerith posts, pickets, rails, and hinge hardware for structural repairs - no exceptions, because the powder-coat match and wind-load rating depend on OEM components. For non-visible fasteners and concrete, we use spec-grade aftermarket anchors and 4000 psi mix. We’ll tell you which is which on the written line-item quote.

Service Areas Near Houston

We serve the full Houston metro, including the Heights, Montrose, Katy, Pearland, Sugar Land, Clear Lake, Friendswood, Meyerland, Bellaire, and West University Place. For more on our broader coverage, see our Houston service area page. If you’re outside Harris County, we also provide Jerith sales & service in the rest of Texas - including Jerith service in San Antonio and Jerith service in San Diego for California clients.

Book Your Jerith Service in Houston Today

Call (470) 298-9650 for a free written estimate on Jerith aluminum fence installation, repair, or full replacement in Houston. We’ll show you the lot-line research, the post specs, and the flat price - measure twice, say it once, show your work.

Written by Grant Rowan, Owner at Rowan Construction Group, serving Houston since 2007.