Jerith Construction in Miami, FL

Jerith Construction in Miami, CA | Rowan Construction Group

We provide independent Jerith fence and gate service across Miami, from Hialeah to West Miami to the Brickell corridor. The defining fact of Jerith work here is simple: Miami-Dade County’s High-Velocity Hurricane Zone code treats a residential aluminum fence as a structural system, not a decorative accessory. That changes which parts we stock, how we anchor posts, and what we tell you before a single panel goes up. Call (470) 298-9650 for a written estimate.

Call (470) 298-9650

Rowan Construction Group has worked on Jerith aluminum fencing throughout Miami-Dade for years, and we know where these systems hold up and where they fail under hurricane wind loads and salt air. We’re not a Jerith dealer and we don’t claim to be authorized by the manufacturer. What we are is a local crew that understands the brand’s product lines, stocks the OEM parts that matter, and knows when Miami code requires something stronger than Jerith’s standard hardware.

Why Miami Residents Choose Us for Jerith Service

Most Jerith aluminum fencing sold in the U.S. is installed on wood-frame homes or standard concrete slabs. Miami is different. Our crews work on mid-century CBS homes in neighborhoods like Little Havana and Hialeah, where we provide Jerith service in Hialeah, and where exterior walls are concrete block and pool decks sit on limestone with the water table only a few feet down. Anchoring a Jerith post here is not a drill-and-drop job. It’s a masonry calculation.

Grant Rowan grew up in the Crenshaw district watching buildings cycle through neglect and repair, and he trained in construction technology at Los Angeles Trade-Technical College before spending nearly two decades on residential work across Los Angeles County. That background in structural remodels matters here because a fence fail in Miami is rarely about the panel. It’s about what the post is set into and whether the anchor can survive years of corrosion jacking and storm-cycle flexing.

We bring a written price to every Jerith job before work starts, and every visit ends with a documented photo record of what we found and what we replaced. That discipline is part of our founding promise, and it’s printed on every estimate we hand over.

Common Jerith Construction Problems We Solve in Miami

• Powder-coat blistering and peeling along bottom rails – We see this most often within a mile of Biscayne Bay, where salt spray meets 80% average humidity and the coating fails at the lowest point of the rail. We strip the affected section, treat the aluminum, and apply Jerith OEM powder-coat touch-up kits, then seal coat the panel to slow the next cycle.
• Gate sag and latch misalignment from hinge post flex – Hurricane-season wind gusts push gates past their design tolerance, and hinge posts set in shallow concrete begin to lean. That throws off the latch geometry and eventually jams the self-closing mechanism when debris works into the hinge pockets.
• Anchor bolts pulling loose from CBS walls and pool decks – Original installs often used standard wedge anchors that corrode in Miami’s high water table. We remove the failed anchor, drill for an epoxy-set galvanized or stainless replacement, and reset the post with a Miami-Dade approved fastener.
• Weld failure on decorative scrolls and picket connections – Chloride pitting attacks field welds that were never touched up after fabrication. Salt air finds the microscopic cracks, and the weld fails from the inside out. We grind out the bad weld and re-fabricate the connection with proper touch-up.
• Non-compliant pool fence installations – Miami-Dade requires a separate barrier inspection for any fence around a pool, and many Jerith “pool fence” kits sold elsewhere don’t pass here. We’ll tell you plainly if your existing fence is out of code and what it takes to bring it into compliance.

Before

After

Jerith Service in Miami: What Local Conditions Mean for Your Equipment

Miami is the only major city in the continental U.S. where every Jerith fence installed around a pool must pass a separate Miami-Dade County barrier inspection that checks for a minimum 54-inch height, no climbable horizontal rails within 45 inches of grade, and a self-closing, self-latching gate with the release on the pool side. That’s a code detail that catches off-market Jerith pool fence kits sold elsewhere and forces custom fabrication here. A fence that passes in Tampa or Orlando fails in Miami, and the inspector will not waive it. For Jerith owners, that means the fence you bought as a “pool-safe” kit may not actually be legal here, and the fix often involves re-racking panels, replacing gate hardware, or modifying rail spacing as part of our Fence Installation in Miami. We pre-mount a temporary pool barrier during any repair so the inspection doesn’t get held up while the work is in progress. If you’re within a mile of Biscayne Bay, the salt exposure adds a second problem: standard galvanized hardware corrodes faster than anyone expects, and we won’t reinstall a post with hardware that won’t survive the next two storm seasons.

Measure twice, say it once, show your work. That’s how we approach every Jerith job in Miami, because the paperwork trail matters as much as the finished fence when an inspector is standing in your yard.

Jerith Models & Products We Service in Miami

We service the full Jerith aluminum lineup: Residential Aluminum (RA series), Industrial Aluminum (IA series), Estate Aluminum (EA series), and Pool Fence (PF series). For most residential series, we stock OEM pickets, rails, gate hardware, and powder-coat touch-up kits locally for fast Miami turnaround. For corroded anchors and fasteners, we specify Miami-Dade approved hot-dip galvanized or stainless aftermarket parts, because Jerith’s standard hardware does not meet HVHZ corrosion requirements. On gates over 8 feet or with heavy automation, we usually recommend full panel replacement rather than welding cracks that will re-fail in the next storm season. A patch job on a compromised gate is a false economy, and we’ll show you why in writing before you spend a dollar.

Jerith Service Pricing in Miami

FAQs - Jerith Construction in Miami

Does a Jerith aluminum fence meet Miami-Dade HVHZ wind load requirements?
It depends on the install, not just the product. Jerith’s aluminum panels can meet HVHZ wind load when properly anchored into CBS walls or deep-set concrete footings with Miami-Dade approved fasteners. The weak point is almost always the anchor, not the panel. We’ll assess your existing install and tell you in writing whether it passes or what it takes to get it there.

Why is my Jerith powder coating peeling after only three years in Miami?
Salt spray and 80% humidity attack the bottom rails first, especially within a mile of the bay. The coating micro-cracks, salt water gets underneath, and the blistering spreads. We strip, treat, and re-coat with Jerith OEM touch-up kits, then apply a seal coat to extend the life of the finish.

Can I install a Jerith pool fence without a Miami-Dade barrier inspection?
No. Miami-Dade requires a separate barrier inspection for any fence around a pool, and it checks height, rail spacing, and gate hardware. Skipping it is a code violation that can hold up a home sale. We prep your fence for inspection and often pre-mount a temporary barrier during repairs so the inspector signs off the same afternoon.

Are Jerith gate hinges replaceable, or do I need a whole new gate?
Hinges are replaceable, and we stock Jerith OEM hardware for most residential series. For salt-exposed installations, we upgrade to stainless hinge pins because the standard hardware won’t hold up long-term. If the gate frame itself is corroded or the welds are failing, we’ll recommend full panel replacement rather than patching a gate that will re-fail. Call (470) 298-9650 for an exact quote; estimates are free.

Do you stock Jerith touch-up paint for the cream and bronze colors?
Yes, we carry Jerith OEM powder-coat touch-up kits for the standard cream and bronze colorways. If we don’t have your exact color on the truck, we’ll have it in hand within a few days. Our Miami service area page shows where we’re working this month.

Service Areas Near Miami

Our Jerith service runs throughout Miami-Dade County and into nearby cities: Los Angeles, Houston, San Antonio, San Diego, Dallas, and San Jose. If you’re in the broader region, see our Jerith service in Oakland page or the Jerith service in Arlington page for local details. We’ll tell you straight if we’re the right crew for your distance.

Book Your Jerith Service in Miami Today

If your Jerith fence is sagging, peeling, or failing inspection, we’ll give you a written price before any work starts. Call (470) 298-9650 to schedule your free estimate. Storm damage calls come first.

Written by Grant Rowan, Owner at Rowan Construction Group, serving Miami since 2007.