Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterBelgard Construction in Long Beach, CA | Rowan Construction Group
We provide independent Belgard paver and wall installation, repair, and replacement across Long Beach, including our Driveway & Pavers in Long Beach. The difference comes down to this: Long Beach sits on the Newport-Inglewood Fault, which means the ground under your Belgard patio or driveway moves in ways it doesn’t in Seal Beach or Lakewood. Our crews account for that when we build. Call (470) 298-9650 for a free estimate with a written price before any work starts.
Rowan Construction Group has worked with Belgard products since 2007, and our crews know these pavers as both a brand and a material system. We’re not a manufacturer affiliate. We’re an independent contractor who specifies Belgard because the product catalog, from Catalina Slate to Dublin Cobble, holds up to Long Beach conditions when installed the right way. What makes our work different is documentation: every visit includes a photo record, every quote is line-itemed, and no change proceeds without a signed change order.
Why Long Beach Residents Choose Us for Belgard Service
We don’t sell enthusiasm. We put numbers in writing before anyone picks up a tool. That’s Clause 1 of the Haven Standard, the operating discipline Rowan Construction Group has followed since Grant Rowan founded the company in 2007. Grant trained at Los Angeles Trade-Technical College in construction technology, where framing, concrete, and estimating were part of the curriculum before he ever ran a paying job. He spent two decades working residential and light commercial projects across LA County, and the work he’s called back for most often is structural work, the kind where bad ground makes good hardscape fail.
For Long Beach homeowners, that background matters. A Belgard patio in Rose Park on a pre-1940 craftsman bungalow behaves differently than the same patio in Bixby Knolls on a 1990s slab. We know both. We use genuine Belgard pavers, coping, and wall caps when matching existing work or doing color-critical installs, and we source base materials locally to meet or exceed Belgard’s installation specs. That’s what “done right” means here: the right product, the right base, and the right documentation.
Common Belgard Construction Problems We Solve in Long Beach
- Seismic joint failure on pre-1940 foundations. Craftsman bungalows in Rose Park and Wrigley sit on foundations that move independently of hardscape during ground movement. Pavers shift, joints crack, and the interlock breaks down. We re-level, re-compact, and replace the joint sand before installing edge restraints that hold everything in place.
- Salt air corrosion within a mile of the shoreline. Belmont Shore and Naples Island properties face Pacific salt air that corrodes edge restraints and paver accessories faster than inland LA County. We specify coastal-rated aluminum and polymer restraints, and we flag this in the written scope so you know it’s not a random upsell.
- Subsidence-related paver settlement near the port. West Long Beach and the blocks near Terminal Island sit above the Wilmington Oil Field, where extraction caused up to 29 feet of land subsidence in the worst areas before injection programs stabilized it. Standard grading assumptions from the rest of LA County fail here. We compact with geotextile fabric and adjust base depth to the actual elevation of each lot.
- Weed and ant intrusion through degraded joint sand. Long Beach’s mild coastal climate is ideal for weeds and Argentine ants that work through compromised paver joints. We remove old sand, treat the base, and install polymer sand that resists both.
- Retrofit-driven hardscape demolition. The city’s mandatory seismic retrofit ordinances for soft-story and non-ductile concrete buildings often require removing existing hardscape to access foundations or walls. We remove, store, and reinstall Belgard pavers after the retrofit is complete, or replace them if they’re cracked or structurally compromised beyond repair.
BeforeAfterBelgard Service in Long Beach: What Local Conditions Mean for Your Equipment
Long Beach’s seismic retrofit program is the quiet driver behind a lot of Belgard work here. When a soft-story apartment building or non-ductile concrete structure gets its mandatory retrofit, the hardscape usually has to come out first. That’s not a cosmetic paver replacement. It’s engineering-demanded demolition, and it means the paver job has to be coordinated with a structural engineer, a permit office, and a retrofit timeline. We’ve handled enough of these in central and east Long Beach to know the sequence: remove, document, store, retrofit, rebuild, and level to the post-retrofit grade. It’s a condition Seal Beach and Lakewood don’t share.
In Rose Park, on a craftsman bungalow, our crew replaced a failing concrete walkway with Belgard Holland Stone pavers after the homeowner’s seismic retrofit exposed severe uneven settlement from years of ground movement. We removed the old walk, re-compacted the base with geotextile fabric, and laid the pavers on a sand bed with edge restraints rated for coastal air. Six months later, the walkway was still level and draining properly, even through winter ground movement. That’s the kind of job that taught us not to trust standard base depths near the fault line.
Belgard Models & Products We Service in Long Beach
We install and repair the full Belgard hardscape catalog, with the most local demand for four lines: Catalina Slate for large paver patios with a clean, modern face; Holland Stone for walkways and small driveways where a classic cobble pattern fits older Long Beach homes; Mega-Arbel for driveways that need a heavier load rating; and Dublin Cobble for borders and accent bands. For matching existing work, we always specify genuine Belgard pavers, coping, and wall caps. For base materials, we use locally sourced aggregate and polymer sand that meet or exceed Belgard’s installation specs. We call for full replacement only when pavers are cracked, severely effloresced, or structurally compromised beyond repair. You can read more about our broader Belgard sales & service work.
Belgard Service Pricing in Long Beach
Here’s the pricing table we give Long Beach homeowners before any work begins. These are flat ranges in dollars, not “call for a quote” placeholders:
| Service | Price Range |
|---|---|
| Paver Patio Installation | $3,500-$11,000 |
| Paver Driveway Installation | $7,000-$18,000 |
| Concrete Driveway Installation | $4,500-$12,000 |
| Kitchen Remodel | $14,000-$45,000 |
| Bathroom Remodel | $9,000-$28,000 |
What drives the price: square footage, base condition (subsidence zones need more compaction and fabric), paver model, and whether a retrofit or permit process is involved. Your free estimate includes a written line-item quote, a written scope, and a written warranty. No change order proceeds without your signature. Call (470) 298-9650 to schedule it.
Serving Long Beach, CA - Our Local Coverage Area
We’re based in the Long Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Belgard Construction in Long Beach
Yes. Naples Island’s canal-adjacent lots experience chronic soil saturation and foundation movement, which means a standard base will shift within a year or two. We specify deeper excavation, geotextile fabric, and more compaction than a mainland Long Beach job. The base is the part you can’t see, and it’s the part that fails first near water. Call (470) 298-9650 for an exact quote, and we’ll walk the lot before we write numbers.
If your soft-story or non-ductile concrete building requires a retrofit, the driveway may need partial or full removal to access the foundation. We remove the pavers, document their condition, store them, and reinstall them after the retrofit completes. If they’re cracked or compromised from the retrofit, we replace them with a genuine Belgard match. Estimates are free, and the scope covers removal through reinstallation. Call (470) 298-9650.
No. In West Long Beach, where Wilmington Oil Field subsidence left neighboring lots at measurably different elevations, overlaying pavers onto an uneven concrete slab will telegraph every crack and low spot. We pull the old concrete, re-grade to the actual lot elevation (requesting historical subsidence maps when needed), and build a new base. It costs more up front and lasts decades longer. Call (470) 298-9650 for a free estimate.
Mega-Arbel pavers, with their denser concrete mix, plus coastal-rated aluminum edge restraints, hold up best to Pacific salt air corrosion near Belmont Shore. The restraint choice matters as much as the paver: standard steel restraints will corrode within a few seasons. We specify the right materials in the written scope so there’s no surprise after the crew leaves.
Yes. That’s a bulk of our Long Beach retrofitting-adjacent work. We remove the Belgard pavers, document each section with photos, store them clean and labeled, and reinstall them after foundation access closes. If the retrofit damaged pavers, we replace only those pieces with a genuine Belgard match. Call (470) 298-9650 and we’ll bring the pricing sheet.
Service Areas Near Long Beach
We serve the full Long Beach service area, from Naples Island to North Long Beach. Our teams also cover neighboring cities including Los Angeles, San Diego, San Jose, and Dallas for larger projects. If you’re in Texas, you can find our Belgard service in Miami and Belgard service in Oakland as reference pages for how we handle local conditions elsewhere.
Book Your Belgard Service in Long Beach Today
Call (470) 298-9650 to schedule a free estimate for your Belgard patio, driveway, or retrofit-related hardscape work, including Fence Installation in Long Beach. We’ll write the price down before anyone picks up a tool. Measure twice, say it once, show your work.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Long Beach since 2007.