Belgard Construction in Garland, TX

Belgard Construction in Garland, CA | Rowan Construction Group

We’re Rowan Construction Group, an independent Garland contractor offering Fence Installation in Garland and servicing Belgard paver driveways, patios, and retaining walls across Dallas County. The short answer on price: a Belgard paver driveway in Garland runs $7,000 to $18,000, and a paver patio runs $3,500 to $11,000, depending on square footage and what we find underneath. What makes our Belgard work different here is simple: Garland’s black clay and unreinforced 1950s slabs force a base protocol that most paver crews skip, and we don’t. Call (470) 298-9650 and we’ll put a written number in front of you before anyone touches a shovel.

Call (470) 298-9650

Why Garland Residents Choose Us for Belgard Service

We’ve worked on Belgard paver systems across hundreds of Dallas County homes, providing Dallas Belgard service, and the lesson repeats itself: the failure is rarely the paver. It’s what the paver sits on. Garland’s shrink-swell clay cycles foundations and hardscape bases multiple inches a year, and a Belgard driveway laid over an unreinforced 1950s slab will telegraph every one of those movements through the surface within a few seasons. Grant Rowan trained in construction technology at Los Angeles Trade-Technical College, where the coursework covered concrete and project estimating before he ever bid a paying job, and he has carried that discipline into every Garland site we walk. We know which Belgard lines hold up on this subgrade and which ones need a reinforced sub-slab before the first unit goes down. We’re not a manufacturer-authorized dealer; we’re the independent crew that fixes what the clay does to the work, and we do it with genuine Belgard units so the color and calibration match.

Common Belgard Construction Problems We Solve in Garland

• Clay-driven differential settlement in driveways. The black clay under Garland swells after spring rain and shrinks in summer drought, and when it moves, individual pavers dip and then crack under vehicle load. We see this most on driveways laid over unreinforced 1950s slabs, where the slab itself has cracked along two planes.
• Edge restraint failure and lateral spread. During prolonged summer drought, the clay shrinks away from the paver perimeter and the outer rows creep outward, widening joint gaps. This is a base and restraint problem, not a paver problem, and it’s repairable without a full tear-out if caught early.
• Efflorescence and de-icing salt pitting on smooth-faced units. After Garland hailstorms and hard freezes, Lafitt Grana and other smooth Belgard faces develop a whitish bloom or micro-pitting that homeowners mistake for a manufacturing defect. It’s a moisture and salt interaction, and we can restore the surface or replace affected units.
• Bulging retaining walls from missing drainage. We routinely find no gravel backfill or missing weep holes on older Garland DIY installs. After spring rains, the saturated soil behind the wall expands and pushes the face forward, cracking units and rotating the wall. That’s a drainage failure first.
• Grid-like crack patterns from thin base over cotton-black clay. A too-thin crushed stone base flexes with every shrink-heave cycle, and large Belgard patios show grid cracks within two to three years. The fix is removing the failed section and building the base to handle Garland’s movement, not just covering it.

Before

After

Belgard Service in Garland: What Local Conditions Mean for Your Hardscape

Garland requires a foundation disclosure and often a slab inspection before any hardscape permit is issued in central and south Garland. That’s not a formality here; it’s a filter. We routinely encounter paver driveways that are 2 to 3 inches out of level because they were laid over unreinforced 1950s slabs that had already moved decades before the pavers went down. This is the information-gain reality that separates Garland from Mesquite or Richardson: the city’s particular clay subgrade and its concentration of unreinforced post-war slabs mean the city inspector will not sign off on a hardscape permit until the slab condition is documented and, in many cases, remediated. For Belgard owners, that means a paver overlay done cheaply a decade ago may now require edge-to-edge re-grading and, in some cases, a doweled and re-poured concrete sub-slab before new units can be reset. We plan for that from the first site visit instead of discovering it after the permit is on file.

Our crew was called to a 1962 brick-veneer ranch on Glenbrook Drive in central Garland where the original Cambridge Cobble paver driveway had heaved a full 2.5 inches at the garage apron after the spring rains. When we pulled the pavers, the unreinforced slab beneath had cracked along two planes. We removed the failed section, doweled and re-poured a reinforced concrete sub-slab with proper drainage, then re-laid the Cambridge Cobble with a 6-inch compacted base and concrete edge restraint. No more heaving. The driveway drains to the street instead of pooling against the foundation. That’s the difference between a paver job and a paver job that survives Garland.

Under Clause 1 of the Haven Standard, the price is written before anyone starts. That applies to Belgard work the same as any other trade we run. Every paver project gets a flat written quote with a written scope and a written warranty, so the number you see is the number you pay, unless you sign a change order. We have kept project costs within a few percent of the agreed price across more than 4,000 jobs since 2007, and we don’t treat hardscape as an exception.

You can read more about our Belgard sales & service approach, and if you’re confirming coverage, our Garland service area page lists the neighborhoods we work weekly.

Belgard Models & Products We Service in Garland

We install and repair the full Belgard residential range, with the most common local lines being Mega-Arbel, Cambridge Cobble, Urbana, and Lafitt Grana. Mega-Arbel and Cambridge Cobble hold up well on Garland’s subgrade when the base is built correctly; Urbana and Lafitt Grana need extra attention at the edges because their tighter joints are less forgiving of lateral movement. On parts, we stick strictly with genuine Belgard units. Color blends and manufacturing calibrations vary enough that aftermarket or look-alike pavers will show patterning mismatches within a season. We’re honest about repair versus full re-install: if the failure is localized, a birdbath, a cracked single paver, a failing edge restraint, we cut out and reset the affected area with matching stock. We only recommend full removal and re-base when the subgrade has failed or the joint pattern is broken beyond 10 to 15 percent of the area.

Belgard Service Pricing in Garland

FAQs - Belgard Construction in Garland

Service Areas Near Garland

In addition to Garland proper, we serve Dallas, Richardson, Mesquite, Sachse, and Rowlett. Our crews also run Belgard service in the broader metro, including Belgard service in Irving and Belgard service in Fremont. If you’re inside the DFW belt, we can likely get a crew to you this week.

Book Your Belgard Service in Garland Today

You’ll get a written price, a written scope, and a written warranty before any pavers are ordered. Measure twice, say it once, show your work. Call (470) 298-9650 to schedule your free Belgard estimate in Garland.

Written by Grant Rowan, Owner at Rowan Construction Group, serving Garland since 2007.