Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Construction in Riverside, CA | Rowan Construction Group
We install, repair, and replace Tremron paver driveways, patios, and retaining walls across Riverside, California. We’re an independent Tremron service provider, not a manufacturer dealer. The difference that matters here: our crews know how Tremron’s segmental concrete units behave when Riverside’s expansive clay soils heave under them, and we price the fix in writing before anyone shows up with a shovel. Call (470) 298-9650 for a free estimate.
Why Riverside Residents Choose Us for Tremron Service
Rowan Construction Group has been putting numbers in writing since 2007. We’ve reset and rebuilt hundreds of Tremron installations across the Inland Empire, and we’ve dismantled enough failed Riverside Driveway & Pavers jobs to know the failure starts underground, not on the surface. Grant Rowan, our owner, trained in construction technology at Los Angeles Trade-Technical College before he ever bid a paying job. That estimating background is why we don’t quote over the phone. We come out, look at the base, the slope, the clay, and then we hand you a written price with a written scope. Under Clause 1 of The Haven Standard, the number you agree to is the number you pay. No change proceeds without a signed change order. That’s how projects stay within a few percent of the agreed cost.
We also carry the Tremron lines that matter for Riverside’s housing stock. See our full Tremron sales & service page for model details.
Common Tremron Construction Problems We Solve in Riverside

Here’s what we actually see on Riverside job sites, not what’s in the brochure:
- Edge spalling on Mega Olde Towne pavers from thermal shock. Riverside summers hit 108°F to 112°F. When irrigation spray lands on a paver surface that hot, the rapid cooling can pop the face right off the concrete. We see it most on patios with above-ground sprinkler heads that drift onto the hardscape. The fix is usually resetting the affected units and adjusting the irrigation pattern so the pavers stop cycling between 140°F and 70°F twice a day.
- Settlement and lip formation on Holland Stone driveways. Riverside’s clay soils shrink in drought and swell after rain. The heave cycle doesn’t move the paver itself, it moves the base under it. Driveways develop a noticeable lip at the garage apron or along the street edge. We pull the units, recompact the subgrade, sometimes stabilize it with lime, and reset with fresh bedding sand. Replacement only makes sense when more than 30% of the contiguous area is damaged.
- U-Cara face plates loosening on hillside retaining walls. The U-Cara Multi-Face Wall System relies on face plates that clip onto the structural block. On cut slopes in Alessandro Heights and La Sierra Hills, soil pressure builds behind the wall each winter and releases in summer. Over enough cycles, the plates start to walk off the blocks. We re-level the wall, correct the drainage behind it, and reset the face plates. The drainage correction is the part that lasts.
- Efflorescence and salt bloom in Wood Streets irrigation zones. The older Wood Streets homes sit on pier-and-grade-beam foundations with lots of irrigation water moving through the soil. When that water wicks up through paver joints, it carries salts that leave a white bloom on the surface. It’s cosmetic, not structural, but it’s ugly. We treat it with efflorescence cleaners and correct the jointing sand to reduce water movement through the slab.
- Base erosion from gutter downspouts discharging onto driveways. Many 1950s-1980s tract homes in Riverside route roof water straight onto the driveway. Over ten or fifteen years, that concentrated flow scours the paver base. The repair is a hidden trench drain or a re-slope, not just new pavers. If you don’t fix the water, the new pavers fail the same way.
Before
AfterTremron Service in Riverside: What Local Conditions Mean for Your Equipment
The Wood Streets district is where our Tremron work diverges from everywhere else we operate. Those pre-1910 Craftsman and Victorian homes sit on original pier-and-grade-beam foundations, not modern concrete slabs. When you lay pavers against a home like that, runoff that slopes toward the foundation creates mudsills: the wood sill plate sits against wet soil, and rot starts where you can’t see it. We install Tremron pavers on those homes with no-slope-to-foundation drainage or hidden trench drains. Every time. It’s a detail flatland tract homes in Moreno Valley rarely need, because a 1980s slab-on-grade foundation with a raised stem wall tolerates ordinary runoff. A 1912 Craftsman on Magnolia Avenue with the original redwood sill doesn’t. That’s why we send a crew lead out to look at the foundation before we write the quote. Measure twice, say it once, show your work.
On Magnolia Avenue near the Wood Streets, our crew lifted a settled Tremron Holland Stone driveway that had heaved 1.5 inches along the garage apron. We pulled the pavers, recompacted the clay subgrade with lime stabilization, laid fresh bedding sand, and reset the same units with a 2% slope away from the stem wall. Twelve months later there was no edge spalling and no new settlement.
Tremron Models & Products We Service in Riverside

We work on the Tremron Mega Olde Towne pavers, Holland Stone pavers, U-Cara Multi-Face Wall System, and the Stonegate Collection. For structural repairs where color and dimensional match matter, we source genuine Tremron units. We don’t substitute a similar color from a different manufacturer and call it close enough. For base and joint stabilizers, we use local quarry aggregates and polymeric sands that hold up under Riverside’s clay movement. We stock common replacement units in our local yard, which means a repair in Riverside doesn’t wait on a truck from a distribution center two counties away.
Tremron Service Pricing in Riverside
Here’s what Tremron paver and concrete work costs in Riverside, based on the projects we’ve priced here:
| Project | Price Range |
|---|---|
| Paver Driveway Installation | $7,000-$18,000 |
| Concrete Driveway Installation | $4,500-$12,000 |
| Paver Patio Installation | $3,500-$11,000 |
| Driveway Replacement | $5,000-$14,000 |
What drives the number is what’s under the pavers: clay condition, base depth, drainage corrections, and whether we’re pulling and resetting existing units or starting fresh. A free estimate means we come out, look at the subgrade, and hand you a written line-item quote. Call (470) 298-9650 and we’ll schedule it. Every quote includes the documented photo record of what we found.
Serving Riverside, CA - Our Local Coverage Area

We’re based in the Riverside area and know this community well, offering Fence Installation - Riverside and more. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Tremron Construction in Riverside
The heaved paver is never the cause, it’s the symptom. Riverside’s expansive clay swells when winter rain arrives after the long dry season. The clay lifts the base, the base lifts the pavers. The fix we perform on older west-side homes involves pulling the pavers, lime-stabilizing or recompacting the subgrade, and resetting the units with proper drainage. Then we give you a written warranty on the work. Call (470) 298-9650 to schedule an inspection of your driveway base.
Yes, in most cases we can source genuine Tremron units in the original color from our local stock or the manufacturer’s current production. When a color has been discontinued, we’ll tell you that in writing and show you the closest available match before we order anything. Call (470) 298-9650 if you need a color-matched repair quote.
Polymeric sand with a high melting-point binder. In Riverside heat, low-grade polymeric sands can soften and track into the house. We use sands that hold their bond at the surface temperatures we actually see on August afternoons. The product spec matters more than the brand name on the bag.
Yes, if it’s engineered for the soil pressure and drained correctly. A U-Cara wall on a Riverside hillside cut needs a proper footing, drainage aggregate behind the block, and a geogrid if the height requires it. We don’t install retaining walls in the hills without checking those details. Call (470) 298-9650 for a written quote.
Yes. Older Riverside streets without curbs let water sheet across the paver edge, which means edge restraints matter more. We install concrete edge restraints on those driveways so the perimeter pavers don’t drift out of alignment. It’s a standard detail on every Riverside job we quote.
Service Areas Near Riverside

We serve Riverside and the surrounding Inland Empire. If you’re in Los Angeles or San Diego, we can coordinate a visit for larger Tremron projects. If you need Riverside service area details or have a property in San Bernardino or Moreno Valley, call us. For customers further north, we have you covered through Tremron service in Stockton. Texas customers can check Tremron service in Plano.
Book Your Tremron Service in Riverside Today
Call (470) 298-9650 to schedule a free estimate for Tremron paver installation, repair, or replacement in Riverside. We’ll send a uniformed, background-checked crew lead out to look at your site. You’ll get a written price before any work starts, and a documented photo record when we leave.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Riverside since 2007.







Before
After
Before
After