American Standard Roofing Nationwide

Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as $199/month*on approved credit; ask for current terms
Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

American Standard Roofing: The Los Angeles Owner’s Guide

If you’re searching for American Standard roofing parts in Los Angeles, you’re likely looking at a failed shingle, compromised flashing, or a leak that started small and is now staining drywall. We stock and install American Standard-compatible roofing materials across Los Angeles County, and a typical roof repair runs $470-$2,125, while a full replacement lands between $9,440-$23,600 depending on roof size, slope, and deck condition. Most owners discover the problem the same way: a water spot on the ceiling after heavy rain, granules collecting in gutters, or a shingle flapping during Santa Ana winds.

Call (470) 298-9650

Which American Standard Models This Applies To

American Standard’s roofing lineup in Los Angeles is primarily distributed through select supply houses, and the most common product lines we service are their architectural asphalt shingles and self-adhered underlayment systems. The compatibility gotcha is this: American Standard shingles use a 5⅝-inch exposure width, which differs slightly from the 5-inch exposure on some GAF and Owens Corning lines. That means you can’t mix rows from different manufacturers on the same roof plane and expect clean sight lines or a valid warranty. If you’re patching, we match the exact product from the original install, or we recommend a full-plane replacement if that product has been discontinued.

To identify what you have, check the bundled shingle wrapper or look for the ink-jet code printed on the back of a removed shingle. That code tells us the plant, date, and product line. For the underlayment, American Standard’s peel-and-stick membrane has a distinctive blue release film. For OEM versus aftermarket: American Standard’s warranty applies only when you install their full system together, shingles and underlayment. If you’re replacing after storm damage, we’ll tell you honestly whether a partial repair with aftermarket components makes sense, or whether the warranty math favors staying OEM. We also stock parts for KraftMaid, Cambria, and Silestone on the cabinetry and countertop side, but roofing is GAF, Owens Corning, and American Standard territory for us.

Signs Your American Standard Roofing Is Failing

Two professional roofers installing asphalt shingles on a residential roof.
Signs Your American Standard Roofing Is Failing
  • Granule loss in gutters or at downspout bases. Asphalt shingles shed granules as they age; heavy accumulation after a rain means the shingle’s UV protection is gone and the mat underneath is exposed. In Los Angeles, UV breakdown happens faster than moisture-related failure, especially on south-facing slopes.
  • Curling or cupping shingle edges. This means the shingle has lost its volatile oils and is shrinking. Once edges lift, wind gets under them. During a Santa Ana event, a lifted shingle becomes a torn shingle very quickly.
  • Water stains on ceilings or at wall junctions. These rarely mean the shingles are the problem. In our Los Angeles County service area, most leaks trace to failed flashing at penetrations: plumbing vents, chimneys, skylights, or where a second story wall meets a lower roof.
  • Damp spots or soft decking in the attic. If you can push a screwdriver into your roof deck from inside the attic, the plywood has absorbed water. That deck section has to be replaced before any new shingle goes down. We see this most often in older Los Angeles homes where ventilation was never correct and condensation built up over decades.
  • Shingles blow off entirely. This is a nail-placement failure in most cases, not just wind. If the original installer nailed too high on the shingle, the strip misses the nail line, and the shingle can’t resist uplift. We document exact nail pattern on every inspection because it tells us whether the rest of the roof is waiting to do the same thing.
BeforeBefore
AfterAfter

Replacement Cost & What’s Included

For American Standard roofing work in Los Angeles, here’s what you can expect on price, in writing, before anyone picks up a tool:

  • Roof repair (flashing, small shingle patches, vent boots): $470-$2,125
  • Tile roof repair (concrete or clay tile reset or replacement): $710-$2,950
  • Full roof replacement (asphalt shingle, standard Los Angeles single-story): $9,440-$23,600
  • Metal roof installation (standing seam, full replacement): $17,700-$47,200

The range depends on roof square footage, number of stories, accessibility, deck replacement if needed, and whether we’re pulling a permit. On a repair, the price includes the part, labor, disposal, and a documented photo record of what we found and what we fixed. On a replacement, it includes tear-off, deck inspection, underlayment, shingles, flashing, ridge vent, and a written warranty. Under Clause 1 of the Haven Standard, you get a flat written price with a written scope before we schedule the crew. No change proceeds without a signed change order.

DIY or Call Us?

Contractor applying mortar with a notched trowel for kitchen tile installation
DIY or Call Us?

If your American Standard roof is leaking, the safest thing you can do yourself is contain water inside the house with a bucket and move valuables. If you want to understand the problem before calling, check your attic during daylight and look for light penetration at penetrations. That tells you where the failure likely is. What we’d caution against: walking a steep roof in Los Angeles tile or shingle without proper safety equipment. Roof work is genuinely dangerous. Falls from single-story roofs send homeowners to the ER every year. If you’re not comfortable on a ladder with a harness, don’t be on that ladder. We bring full fall protection, background-checked crews, and a live person answers when you call. The ask is the free estimate, not the job: call (470) 298-9650 to schedule one.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Get a Written Price Before Any Work Starts

Contractor installing a stone countertop onto new kitchen cabinets
Get a Written Price Before Any Work Starts

Grant Rowan grew up in the Crenshaw district and has spent nearly two decades on residential and commercial roofs across Los Angeles County. He trained at Los Angeles Trade-Technical College before ever swinging a hammer on a paying job, and the discipline stuck: measure twice, say it once, show your work. Every Rowan Construction Group roof project starts with a written price and a written scope. Under the 365-Day Done Right Promise, if the work isn’t right, we make it right. Call (470) 298-9650 to schedule your free estimate for American Standard roofing parts or replacement in Los Angeles.

Written by Grant Rowan, Owner, Rowan Construction Group at Rowan Construction Group, serving Los Angeles and nearby areas.

Need Construction help nationwide? Licensed & insured · Free on-site estimates response · free estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By providing your information above, you agree to the terms of our Privacy Policy and consent to being contacted via phone, email, or SMS about your request, including by the independent contractors we may refer it to.

Prefer to text? Send a Text
Call Now - Fast Dispatch