A remodeled kitchen with a wood island, painted cabinets and a plaster range hood

Owens Corning Kitchen Remodeling Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
New painted shaker cabinets with an organized deep drawer
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A new casement window over a kitchen sink
A new white vinyl privacy fence with a double gate
A remodeled hall bathroom with patterned floor tile and painted walls
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Owens Corning Kitchen Remodeling: The Los Angeles Owner’s Guide

Owens Corning kitchen remodeling in Los Angeles typically runs $16,520 to $53,100 as a full project, and Rowan Construction Group installs Owens Corning materials across cabinet, countertop, insulation, and finish applications throughout LA County. Most owners call us after discovering that their existing kitchen surfaces or systems are failing: water-damaged substrates behind the sink, delaminating countertop edges, cabinets pulling away from walls, or thermal issues that trace back to old insulation. If you’re holding an Owens Corning spec sheet or dealing with a failing kitchen component, here is exactly what we stock, what it costs, and how we match parts to your existing build.

Call (470) 298-9650

Key Takeaways:

  • Full Owens Corning kitchen remodels in Los Angeles: $16,520-$53,100 installed, written price before work starts.
  • Rowan Construction Group is an independent contractor, not affiliated with Owens Corning; we install Owens Corning products alongside KraftMaid, Cambria, and Silestone.
  • Part matching is done by measurement and model label, not guesswork; every visit includes a documented photo record.
  • Permits are pulled where Los Angeles code requires them; every change of scope gets a signed change order before work proceeds.

Which Owens Corning Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Owens Corning’s kitchen applications in the Los Angeles market break into three categories: foam insulation boards used behind cabinet runs and exterior kitchen walls, acoustic batt insulation for interior sound control, and in some builds, Owens Corning-backed structural panels that sit behind tile or stone finishes. The compatibility questions we get most often come from owners who inherit a kitchen remodel spec from a previous contractor and can’t tell which Owens Corning product was used. The answer is usually on the material itself: Owens Corning prints the product series and R-value marking on kraft facing or panel edges. Foamular boards, for example, carry an embossed or printed product code along the edge that includes thickness in inches and compressive strength class. Pull a cabinet drawer, look behind the kick plate or side filler, and take a photo. If the marking is visible, we can match it. If it isn’t, we take a small sample from a hidden area and match by density and thickness.

For countertop and finish applications, Owens Corning does not manufacture solid surfaces directly, but their insulation and moisture barrier products are specified in a lot of Los Angeles kitchen remodels under Cambria, Silestone, or KraftMaid cabinet installations. The OEM-versus-aftermarket decision here is straightforward: for Owens Corning insulation and panel products, we use Owens Corning stock. For adjacent materials like cabinet hinges, drawer slides, or sink mounting hardware, we carry vetted aftermarket equivalents that meet or exceed spec, because paying OEM markup on a commodity hinge doesn’t make sense. We’ll tell you which is which in the written quote, line by line.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Owens Corning Kitchen Remodeling Is Failing

  • Cabinet doors sagging or gaps opening along stile lines - Los Angeles humidity swings cause MDF and particleboard cabinet cores to swell and contract; when doors start catching on the frame, the case itself has shifted. Underlying cause is often failed wall attachment or missing reinforcement behind the Owens Corning panel behind the cabinet run.
  • Countertop edges lifting or seams darkening - water has migrated under the laminate or stone edge and the adhesive barrier has failed. In LA homes built before moisture barrier updates, this is the single most common kitchen failure we see in mid-renovation inspections across neighborhoods like West Adams and Leimert Park.
  • Cold spots on exterior kitchen walls or excessive noise from adjacent rooms - Owens Corning insulation has compressed or slumped in the wall cavity. Batt insulation loses effectiveness when moisture degrades the kraft facing; foam board can crack at seams. We verify with thermal imaging during the estimate, not after the job starts.
  • Tile grout cracking in a straight line along the backsplash - the wall substrate behind the tile is moving. This often traces to an Owens Corning panel that was installed without proper expansion spacing or over an uneven stud plane.
  • Musty smell near the sink base or dishwasher opening - a moisture barrier has failed and water is sitting on the subfloor. In Los Angeles slab foundations, this is rarely visible until the damage is significant; we pull the kick plate and document what we find with photos.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed Owens Corning kitchen remodeling in Los Angeles runs on the same honest ranges we publish for all kitchen work: full kitchen remodel at $16,520 to $53,100, with a small kitchen at $10,620 to $23,600. If you’re replacing just the failed component, expect cabinet installation to run $4,720 to $15,340, countertops at $2,360 to $7,670, backsplash at $945 to $2,950, and a kitchen island at $3,540 to $11,800. What drives the range in Los Angeles specifically: wall condition and substrate repair work, whether your existing cabinets can be reframed or need full replacement, the Owens Corning product series already in place, and the distance from our material yard in the LA basin. Every quote is a flat written price with a written scope and a written warranty. The number you see on the quote is the number you pay, and no change proceeds without a signed change order under our operating standard.

Service Installed Price Range (Los Angeles)
Full Kitchen Remodel $16,520-$53,100
Small Kitchen Remodel $10,620-$23,600
Cabinet Installation $4,720-$15,340
Countertop Installation $2,360-$7,670
Backsplash Installation $945-$2,950
Kitchen Island Installation $3,540-$11,800

DIY or Call Us?

Here’s the honest split. If you’re pulling a drawer to check an Owens Corning product label, measuring a replacement panel, or photographing a moisture stain for documentation, that’s useful and safe. If the failure involves removing cabinets, cutting into walls where plumbing or electrical runs, or working under tensioned hardware, don’t. Kitchen cabinet runs in Los Angeles homes are frequently backed by stud patterns that don’t match the cabinet layout, and cutting into a wall without knowing where the Romex runs is how a $300 insulation fix becomes a $3,000 electrical repair. What that means for you: we document the before, write the scope, and show you exactly what we found under the surface before we touch a single Owens Corning panel. Call (470) 298-9650 for a free estimate, or bring us a competitor’s written quote and we’ll review it line by line at no charge.

FAQs

A new front entry door with glass sidelights

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch