A home with a brand-new roof and gutters at golden hour

PGT Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A standing-seam metal roof over a covered porch
New architectural shingles with a clean valley
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
A new multi-panel patio door opening a kitchen to the patio
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Roofing: The Los Angeles Owner’s Guide

Rowan Construction Group stocks and installs PGT-compatible roofing replacement parts across Los Angeles, with most PGT roof repairs running $470-$2,125 and full replacements landing between $9,440-$23,600 depending on square footage and decking condition. If you’re reading this, you’ve likely spotted water staining on a ceiling, found granules in a gutter after a Santa Ana wind event, or had an inspector flag delamination on your PGT panel system during escrow. That’s how most owners discover a PGT roof part has failed: not with a dramatic leak, but with evidence that shows up quietly.

Call (470) 298-9650

Which PGT Models This Applies To

A new roof with clean valleys and new flashing

PGT’s roofing product line in Los Angeles runs across two primary families: the PGT Impact-Resistant Shingle systems (most common in the San Fernando Valley and Pasadena foothills, where fire ratings matter) and the PGT Standing Seam Metal panel series (heavier presence in coastal zones like Venice, Long Beach, and the Palos Verdes Peninsula, where salt air and wind uplift drive spec decisions). The part you need depends on exactly which system was installed, so before ordering anything, check the manufacturer label on the underside of an exposed panel or on the original permit documentation. The label will show a series code, a panel profile number, and a color code, all three of which determine whether a replacement part is a true match.

Here’s the gotcha that costs owners money: PGT changed its panel profile tolerances in 2018, and a panel stamped pre-2018 will often sit visibly different against a post-2018 replacement. That’s why we measure and photograph every label before we quote. For OEM parts, PGT’s channel moves slower than most suppliers in Southern California, two to six weeks on non-stock items. Quality aftermarket equivalents from manufacturers like GAF and Owens Corning can often meet or exceed the original spec, and we quote both options side by side so you can decide with numbers in hand. We’re an independent contractor, not a PGT dealer, which means we have no incentive to push one path over the other.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your PGT Roofing Is Failing

  • Granule loss collecting at downspout elbows: On PGT shingle systems, the ceramic coating is the UV shield. Once it’s washing off, the asphalt underneath begins oxidizing within two Southern California summers. You’ll see a fine gray-black sediment at gutter corners first.
  • Panel lifting at the leading edge: Standing seam PGT panels rely on continuous clip engagement. When a panel starts lifting along one edge, it usually means a clip has worked loose or corroded, often after a series of high-wind events around the Sepulveda Pass or the Whittier Narrows corridor.
  • Oil-canning that wasn’t there at install: Visible rippling across a flat PGT panel surface is a sign of thermal expansion stress or failed underlayment beneath the panel. In Los Angeles, the swing from freezing nights in the Antelope Valley to 100-degree days in Woodland Hills accelerates this faster than most manufacturer warranty assumptions.
  • Water staining at roof-to-wall transitions: The flashing detail where a PGT roof plane meets a stucco wall is the single most common leak point we repair. In older Los Angeles homes, the stucco itself has often cracked behind the flashing, which means resealing the surface only hides the problem for one season.
  • Fastener corrosion or “rust tears” at panel seams: If you can see rust streaks bleeding from the screw heads or seam joints, the fastener’s protective coating has failed. In coastal Los Angeles, salt-laden air accelerates this to a five-to-seven-year failure cycle, far shorter than the panel itself will last.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roofers installing a new roof with safety harnesses

For PGT roofing work in Los Angeles, expect to pay $470-$2,125 for a targeted repair (flashing replacement, a short run of ridge cap, a damaged panel or section of shingles) and $9,440-$23,600 for a full PGT roof replacement. The spread comes down to three things: total square footage, the condition of the decking under the roofing, and whether the existing underlayment can be reused or must be pulled and replaced. We don’t pad that range with surprises.

Every quote from Rowan Construction Group includes a written line-item breakdown separating materials from labor, a written scope of work, and a written workmanship warranty, before anyone picks up a tool. Under Clause 1 of the Haven Standard, the price is written before work starts, and no change moves forward without a signed change order. That’s why our projects finish within a few percent of the agreed number. If you bring a competitor’s written estimate, we’ll review it line by line at no charge.

DIY or Call Us?

There are exactly two things an owner can safely check on a PGT roof: visible granule loss in the gutters and obvious panel lifting at the edges. Both are observations, not repairs. Beyond that, working on a roof means managing height, slope, and in Los Angeles, tile or metal surfaces that get dangerously hot by midday. A fall from even a single-story roof can be fatal, and PGT metal panels under tension cannot be safely removed by hand without the right tooling and experience.

What we recommend is a documented inspection, not a heroic Saturday. Every Rowan visit includes a photo record of what we found and what we did, so you can see the condition before any money changes hands. Call (470) 298-9650 and we’ll put the number in writing first.

FAQs

A new concrete driveway with a paver border

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch