A home with a brand-new roof and gutters at golden hour

Barrette Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
New architectural shingles with a clean valley
A new roof with clean valleys and new flashing
A new white vinyl privacy fence with a double gate
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Barrette Roofing: The Los Angeles Owner’s Guide

If your Barrette roof component has failed, you’re looking at an installed replacement cost between $470 and $2,125 for most repairs in Los Angeles, with full roof replacements running $9,440 to $23,600. We stock common Barrette-compatible flashings, ridge caps, and underlayment on hand, and we can source the specific profile your roof needs within two business days. Most owners discover the failure the same way: a drip on the ceiling, a shingle in the yard after a Santa Ana wind event, or granule grit collecting in a gutter downspout. The damage is rarely dramatic on day one. It’s usually a slow admission that something overhead stopped doing its job.

Barrette is a building products manufacturer, not a roofing system itself. The parts that carry the Barrette name on a Los Angeles roof are typically the ancillary components: edge metal, flashing, ridge ventilation, and the fasteners and underlayments specified alongside your primary shingle or tile. So “Barrette roofing” in practice means the perimeter and penetration details that keep water moving off the roof and into the gutter. When those fail, the fix is usually localized and the price is predictable. We’ll show you the photo record of what we find before we touch anything.

Which Barrette Models This Applies To

A newly finished roof with a ridge vent and step flashing

Barrette’s roofing product line spans three main categories relevant to Los Angeles homes: metal edge and drip flashings, ridge cap systems, and ventilation products. The compatibility question is less about a “model number” and more about the profile dimensions and material gauge. We’ve seen Barrette drip edge in 1.5-inch and 2-inch face heights, in galvanized steel, aluminum, and pre-painted finishes. If you have the original spec sheet or a leftover piece from the last install, measure the face height and check the gauge. That’s the first data point.

For ridge caps, Barrette manufactures both rigid and roll-form vented ridge systems. The roll-form version is cut and bent on site to match your roof’s pitch, which means the installer’s skill matters as much as the product. The rigid versions come in pre-formed sections, usually 10-foot lengths, and they interlock. Mixing rigid and roll-form on the same ridge creates a visible seam and a potential leak point. If you’re replacing a section of ridge cap on a roof that’s more than five years old, expect to replace the whole ridge run, not patch it. The color match between old and new material will be close but not identical after Los Angeles sun exposure.

OEM versus aftermarket: for flashings and edge metal, quality aftermarket equivalents in the same gauge and profile work fine. The material is commodity steel or aluminum. For vented ridge systems, stick with the OEM or a direct equivalent specified for your ridge configuration. The venting math changes with ridge length and attic volume, and substituting a different vent profile changes the airflow calculation.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Barrette Roofing Is Failing

  • Granule accumulation in gutters or at downspout elbows. This points to shingle surface wear, usually accelerated by Los Angeles UV exposure. Granules protect the asphalt layer; once they’re washing off in volume, the shingle is aging faster than it should. Catch this early and you may only need a localized repair instead of a full re-roof.
  • Water staining on the ceiling directly below a roof penetration. Chimneys, vent pipes, and skylights are the weak points. The Barrette flashing detail around these penetrations is what fails first, usually at the sealant joint. The stain might appear weeks after the actual leak started, which is why attic inspection matters.
  • Lifted or curled shingle edges visible from the ground. This is a drying-out pattern. Shingles lose plasticizer over time, especially on south-facing and west-facing roof planes in Los Angeles. Curling edges catch wind and create peel points.
  • A rust-colored streak running from a nail head or edge metal joint. That’s ferrous oxidation. It means someone used non-galvanized fasteners or the galvanization has worn through. The fastener is now a leak source, and the surrounding metal is compromised.
  • Daylight visible through the attic roof deck, or a musty smell after rain. The underlayment has failed or was never replaced properly. In Los Angeles, underlayment failure often precedes visible shingle failure because our rain comes in short, intense bursts. Moisture finds the gap and sits there for days.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roofers installing a new roof with safety harnesses

For Barrette-related roofing repairs in Los Angeles, we quote installed prices that break down into three bands. A simple flashing replacement or drip edge repair runs $470 to $2,125 depending on linear footage and accessibility. A partial ridge cap replacement with underlayment, including sealant work and photo documentation, typically lands between $1,700 and $2,950 when combined with other repairs. A full roof replacement, which includes new underlayment, all flashings, ridge caps, and the primary shingle or tile material, runs $9,440 to $23,600 for a standard Los Angeles single-family home.

What drives the range: roof pitch and story height. A two-story home with a steep pitch costs more because of safety equipment, slower work, and higher fall protection requirements. The material choice matters too: Barrette edge metal in pre-painted aluminum costs more than galvanized steel but holds its finish longer in coastal Los Angeles air.

Every quote is a flat written price before any work starts. That includes the parts, labor, disposal, the photo record of the existing condition, and a written scope that describes exactly what we’re replacing. Change orders are signed before any additional work proceeds; that discipline has kept our project costs within a few percent of the agreed number across 4,000-plus jobs. The workmanship warranty is in writing.

DIY or Call Us?

Here’s the honest split. What you can safely check yourself: whether your gutters are clear, whether you can see any lifted shingles from the ground, and whether there’s visible staining in the attic after rain. That tells you something is wrong. What you should not do yourself: walk a roof with anything steeper than a 3:12 pitch, pull up shingles to inspect underlayment, or attempt to reseal flashing from a ladder. Roof work in Los Angeles means working at height on surfaces that are either scorching hot or slick from morning marine layer moisture. Falls are the number one cause of construction site fatalities in California.

That’s what made him curious about the building side of the equation before he ever trained in construction technology at Los Angeles Trade-Technical College. The rule he applies on every roof: measure twice, say it once, show your work. Call (470) 298-9650 and we’ll send a background-checked, uniformed technician to document what’s actually happening on your roof. The estimate is free, it’s written, and you get the photo record whether you hire us or not.

FAQs

A new paver pool deck

How long does Barrette roofing typically last in Los Angeles?

Barrette metal edge, flashing, and ridge components in Los Angeles typically last 12 to 20 years, though the primary shingle or tile above them usually dictates the roof’s overall lifespan. Coastal moisture and UV exposure accelerate sealant breakdown at flashings and joints. Call (470) 298-9650 and we’ll give you a written assessment of what’s actually left on your roof, not a guess.

Can my Barrette flashing be repaired instead of replaced?

A flashing with localized sealant failure can sometimes be resealed for one to three additional years, but a rusted-through or mechanically loose flashing should be replaced. In Los Angeles, the cost difference between a proper replacement and a repair that fails again is usually a few hundred dollars. If you’d rather know the exact number for your specific repair, call (470) 298-9650 for a free written estimate.

How long does a Barrette roofing repair take?

Most flashing, edge metal, and ridge cap replacements take four to eight hours on a standard Los Angeles home, with no overnight exposure because we complete the work same day. The exception is full roof replacement, which typically takes two to five days depending on roof complexity. We’ll put the timeline in writing before anyone starts.

Do you stock Barrette parts or do I need to order them myself?

We stock common Barrette-compatible flashings, drip edge, and sealants on hand, and we can source specific Barrette profiles from our network of Los Angeles suppliers within two business days. You don’t need to order anything yourself. Call (470) 298-9650 and tell us what you’re seeing; we’ll match the part to your roof before we quote it.

Written by Rowan Construction Group, Rowan Construction Group at Rowan Construction Group, serving Los Angeles and nearby areas.

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch