A backyard with a new horizontal privacy fence

Jerith Fence Installation Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A new white vinyl privacy fence with a double gate
A new stained cedar privacy fence
A freestanding soaking tub in a remodeled primary bathroom
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
A new front entry door with glass sidelights
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Jerith Fence Installation: The Los Angeles Owner’s Guide

Jerith fence installation in Los Angeles typically runs $4,130 to $10,620 for a full aluminum fence system, which includes posts, panels, gates, hardware, and labor. If you’re dealing with a single failed section or a gate that’s sagging, the repair can often be done for a fraction of that, and we stock Jerith-compatible components on hand for same-visit fixes. Most Los Angeles owners discover a problem the way you probably did: a gate that suddenly drags across concrete, a post that leans after a rain, or a picket that’s cracked loose from the top rail after one too many wind gusts off the canyons.

Call (470) 298-9650

We’re Rowan Construction Group, an independent contractor in Los Angeles. We’re not a Jerith dealer, and we don’t have any affiliation with the manufacturer. What we do have is a working knowledge of Jerith’s aluminum fence systems, the parts they specify, and what actually fails on them in this climate, which is different from what fails in Phoenix or Dallas.

Which Jerith Models This Applies To

A new wood side gate with black hardware

Jerith manufactures aluminum and steel fence systems across several product lines, but in Los Angeles the overwhelming majority of what we service is their aluminum residential series. That includes the Westchester, the Coventry, and the Hyde Park lines, plus commercial-grade options like the Estate series. Each line has its own post dimensions and picket spacing, and the parts are not interchangeable across all of them.

The compatibility gotcha most owners hit is this: Jerith posts are typically 2″ x 2″ extruded aluminum with a wall thickness that varies by series. A Westchester post cap will not seat properly on a Coventry post, because the Coventry uses a slightly different extrusion profile. If you’re matching an existing panel, measure the post outside dimension and the picket spacing between centers before you order anything. Those two numbers get us to the right part about 95% of the time.

On OEM versus aftermarket: Jerith’s aluminum carries a finish warranty, and using genuine Jerith sections preserves that. But for gates, hinges, and latch hardware, we regularly recommend aftermarket equivalents from brands like GTO and National Hardware. They cost less than the Jerith-branded hardware and, in the case of self-closing hinges, often last longer. We’ll show you both options on the quote and explain why we’re recommending what we’re recommending.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Jerith Fence Installation Is Failing

  • Gate drag or sag. The top hinge has wallowed out from years of opening and closing, and the gate is now hanging lower on the hinge side. The fix is typically a heavier hinge post or a welded gate frame, not just tightening screws.
  • Post lean after rain. Water has pooled around the post base because the concrete footer was poured below grade or never domed. In Los Angeles clay soil, which expands and contracts with moisture, this cycles the post loose over five to seven winters.
  • Loose or rattling pickets. The aluminum pickets are held in the top and bottom rails by punched tabs, and over time those tabs fatigue. One or two loose pickets is cosmetic. Twenty loose pickets means the rail itself has started to torque.
  • White chalky residue on the finish. That’s oxidation working through the powder coat. It doesn’t mean structural failure, but it does mean the factory finish has been compromised, usually from sprinkler overspray hitting the same section every morning for years.
  • Ground clearance disappearing. The bottom rail is now touching soil or grass. That’s not the fence settling, that’s the grade rising from years of mulch and landscape top-dressing. The fix is regrading or a rail section replacement, not a new fence.

Replacement Cost & What’s Included

New architectural shingles with a clean valley

Full Jerith fence installation in Los Angeles runs $4,130 to $10,620 depending on linear footage, gate count, and whether the existing posts can be reused. A typical 60-foot backyard with one walk gate and one double drive gate lands around $7,000 to $9,000 installed. Single-section repairs start lower, and we’ll give you a written line-item price before any work starts.

That price includes post removal if needed, new concrete footers where posts are reused, panel and rail installation, gate hardware, and a walk-through with a documented photo record of everything we found and everything we did. Our workmanship warranty on fence installation is covered under the Done Right Promise. If something that was installed isn’t right, we come back and make it right. That’s the whole clause, printed on the quote, not buried in a terms page.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely inspect a Jerith fence yourself. Check each post for movement by pressing firmly at the top. Check gate hinges for wear by lifting the gate from the latch end and watching for play. Check picket fasteners visually. None of that requires a tool or any risk.

Where DIY goes sideways is resetting an aluminum post in concrete. The post has to be plumbed in two planes, the footer has to be domed so water runs away from the base, and concrete takes days to cure before the panel can be reattached. Most homeowners we meet after a DIY attempt have a post that’s plumb east-west and off by half an inch north-south, which translates to a panel that won’t seat in the rail. That’s a $500 mistake on a $200 fix. If you’d rather not make it, call (470) 298-9650 and we’ll send someone who’s set more of these than we can count.

FAQs

A new casement window over a kitchen sink

Get a Written Jerith Fence Installation Estimate in Los Angeles

We’ll come out, measure what you have, identify the series, and hand you a written flat price for the work. No “call for a quote” and no number that changes once the crew shows up. Call (470) 298-9650 to schedule yours.

Written by Rowan Construction Group, Rowan Construction Group at Rowan Construction Group, serving Los Angeles and nearby areas.

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch