A backyard with a new horizontal privacy fence

Belgard Fence Installation Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A new front yard fence with a matching gate
A new black aluminum pool fence with a gate
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
New double-hung windows in a dining room
A new paver pool deck
An open kitchen and dining area after a remodel
A freestanding soaking tub in a remodeled primary bathroom
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Belgard Fence Installation: The Los Angeles Owner’s Guide

Belgard fence installation in Los Angeles typically runs $4,130 to $10,620 for a complete residential project, which includes materials, concrete footings, and labor. We stock Belgard fence panels, posts, and gates on hand, and most installations are completed in two to four working days depending on line length and access. The way most Los Angeles owners discover a problem is specific: a post leans after winter rain, a gate drags across the paver driveway, or a panel cracks where the kids’ basketball keeps landing. What you’re reading now is the page we wrote for the owner who wants the fix matched to the product they already have, priced in writing, and installed without a mystery invoice at the end.

Call (470) 298-9650

Which Belgard Models This Applies To

A new stained cedar privacy fence

We install and service the full Belgard fence and wall product line as it’s sold in California: the patented Belgard Freestanding Wall System, the Origins Linear System for mixed-material fence runs, and the traditional modular block fence series that most Los Angeles homes use for perimeter walls. The compatibility gotcha every owner should know is that Belgard fence and wall blocks are not universal; the tongue-and-groove locking profile changed between older production years and current lots, so a replacement block from a different generation will sit proud or refuse to seat. We measure the block face height and the lock channel depth on site before ordering, because a 6-inch fence block from one series is not a 6-inch block from another. Belgard manufactures genuine replacement parts through their Quick Order system, and we also carry quality aftermarket caps and adhesives that match the factory color and texture within a shade, which usually saves the owner 20 to 30 percent on parts without changing the look.

One honest note: Rowan Construction Group is an independent contractor, not a Belgard affiliate or franchise. We install and service their products because Los Angeles homeowners ask for them by name, and because the written line-item quote lets us show exactly what the factory parts cost versus a comparable aftermarket option.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Belgard Fence Installation Is Failing

  • Leaning post or bowed panel line. The most common cause in Los Angeles is a saturated base course after winter rains followed by dry-summer soil shrinkage. The concrete footing may be intact but the soil under it has slumped; we see this most often on hillside lots in Mount Washington and Silver Lake, where the grade shifts a few inches every wet season.
  • Gate dragging or failing to latch. The post has pulled out of plumb, or the hinge mortise in the Belgard post has worn oval. A gate that scrapes the driveway tells you the post moved, not that the gate warped; we re-set the post and shim the hinge before it takes the latch plate with it.
  • Cracked face block or blown corner. Direct impact is the usual culprit, and Belgard block is dense enough that a crack usually means the strike came in at an angle the block was not designed to take. If the crack follows the vertical lock channel, the whole panel length needs replacement rather than a single block, because the interlock has transferred the load.
  • Efflorescence or white salt staining. This is cosmetic, not structural, but it drives Los Angeles owners crazy. The local pros treat it with a pH-neutral cleaner and then apply the matching Belgard sealer, so the repaired section matches instead of looking like a patch.
  • Settling or a gap opening between cap and block. The soil under the footing has compacted unevenly. In the San Fernando Valley, we see this on clay-heavy lots where summer irrigation on one side of the fence and hardscape on the other create a differential. The fix is lifting the settled section, adding crushed aggregate base, and re-setting; patching the cap alone is a temporary fix.

Replacement Cost & What’s Included

A remodeled primary bathroom with a soaking tub and walk-in shower

A full Belgard fence installation in Los Angeles runs $4,130 to $10,620 installed. The range comes down to three variables: total linear footage, access for equipment, and whether the existing footing can be reused. A 50-foot run that replaces an existing fence on flat ground with good truck access sits near the bottom of the range. A 150-foot hillside run that requires hand-carried block and new concrete footings sits near the top.

Every quote we write includes the parts line-item by line-item: Belgard block per unit, caps, adhesive, base rock, concrete, rebar where the code requires it, and labor. You get the written price before any work starts, under Clause 1 of the Haven Standard, and no change proceeds without a signed change order. The workmanship is covered by our Done Right Promise, and you receive a documented photo record of the job, before and after, as a standard deliverable, not an upgrade.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

An owner can safely check a few things before calling. Look for drainage sitting against the post line. Look for a sprinkler head pointed at the footing. Look for a gate hinge that has pulled its screws. Those observations are useful when we walk the site. What an owner should not do is lift and re-set a Belgard panel without equipment; a single 6-inch modular block weighs about 60 pounds, a panel stacks into the hundreds, and a crushed hand or a dropped course is not worth the money saved. The same goes for cutting block with a dry masonry saw; the silica dust is a respiratory hazard and the cut almost always shows. If you’re in Los Angeles and the fence is failing, call (470) 298-9650 and we’ll put a written price in your hand before anyone touches a tool.

FAQs

A second-story addition that matches the existing roofline

Get a Written Price for Your Belgard Fence in Los Angeles

If your Belgard fence is leaning, cracking, or just starting to look like a problem waiting on a wet winter, the next step is a written quote and a photo record of what we found. Measure twice, say it once, show your work. We’ll walk the line, name the fix, and put the number on paper before anyone picks up a tool. Call (470) 298-9650 to schedule your free estimate.

Written by Rowan Construction Group, Rowan Construction Group at Rowan Construction Group, serving Los Angeles and nearby areas.

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch