A remodeled kitchen with a wood island, painted cabinets and a plaster range hood

Quikrete Kitchen Remodeling Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A new concrete driveway with a paver border
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
New architectural shingles with a clean valley
A new casement window over a kitchen sink
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Quikrete Kitchen Remodeling: The Los Angeles Owner’s Guide

We stock and install Quikrete-compatible kitchen remodeling products across Los Angeles, with full kitchen remodels typically running $16,520 to $53,100 depending on scope, materials, and the condition of what’s behind the walls. Most owners discover a problem the same way: a countertop edge chips, a backsplash grout line cracks, or a section of floor tile starts sounding hollow underfoot. Once that happens, replacing a single piece rarely works because Quikrete products in a kitchen are part of a bonded system, and a failed section usually means the substrate underneath has moved or absorbed moisture. We keep common Quikrete mortar, grout, and patching products on hand, and we’ll match the existing product line before we write a price.

Call (470) 298-9650

Rowan Construction Group is an independent contractor in Los Angeles. We are not affiliated with Quikrete. We’ve installed their products in kitchens from Sherman Oaks to Leimert Park, and the failure patterns are consistent enough that we can usually tell you what’s wrong from a photo before we send a crew.

Which Quikrete Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Quikrete doesn’t make kitchen-specific products the way a cabinet maker does. What they make is the substrate and setting material layer: mortar mixes, grouts, concrete repair products, self-leveling underlayment, and bonding agents. In a Los Angeles kitchen remodel, the Quikrete products that matter are Polyblend Sanded Grout, Polyblend Non-Sanded Grout, Thin-Set Mortar, Self-Leveling Floor Resurfacer, and Concrete Bonding Adhesive. The part that “fails” is almost never a mechanical component, it’s the cured material itself: a grout line that crumbles, a mortar bed that debonds from the subfloor, or a leveling compound that cracked because it was poured too thin over a slab that moves.

The compatibility gotcha with Quikrete in kitchens is moisture exposure and deflection. Polyblend Sanded Grout is rated for joints up to 1/2 inch, but in a Los Angeles kitchen where the floor slab shifts seasonally from wet winters to dry summers, joints wider than 3/8 inch will crack no matter how well they were packed. The product didn’t fail. The spec was wrong for the movement. Before you replace grout, you have to know why it cracked, or you’ll be doing it again in two years.

OEM Quikrete products are widely available at Los Angeles suppliers, so we quote genuine product as the default. For grout, there are aftermarket epoxy grouts (Laticrete SpectraLOCK, Mapei Flexcolor) that outperform Quikrete in wet kitchens, but they cost more and require a different installation technique. We’ll show you both numbers in the written quote and let you decide.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Quikrete Kitchen Remodeling Is Failing

  • Hollow-sounding floor tiles. Tap a quarter across the tile. A sharp, hollow sound means the thin-set has debonded from the slab. In Los Angeles, this usually traces back to a slab that wasn’t properly cleaned before the mortar was spread, or a bonding agent that was skipped. The repair is a full reset of that section, not a spot patch.
  • Crumbling grout lines that shed sand when you wipe them. Grout gets weak when water sits in it repeatedly. Pineapple-sized spills near the sink or dishwasher that soak in and dry slowly are the usual cause. If the sand keeps coming out, the grout has lost its binder and the joint is now a water channel into the subfloor.
  • Countertop edges that chip at the overhang. Quikrete’s countertop mixes cure hard but brittle. An overhang longer than 10 inches without proper support, or a heavy pot dropped on the edge, starts a crack that runs back toward the cabinet. This is a structural issue with the overhang design, not just a surface chip.
  • Cracks in the leveled floor that follow a straight line. Self-leveling compound cracks in straight lines when the slab underneath has a control joint or expansion joint doing its job. The leveller wasn’t cut to match the joint below. In a Los Angeles kitchen, where slabs move with temperature swings, skipping that step guarantees a crack.
  • Stains that won’t come out of grout, especially near the cooktop. Oil and grease from cooking penetrate grout and polymerize over time. Once polymerized, the stain is in the material, not on it. Sealing slows this but doesn’t stop it. If the grout around your cooktop is permanently dark, replacement is the only fix that looks right.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A wood double vanity with two mirrors after a bathroom remodel

A full kitchen remodel in Los Angeles runs $16,520 to $53,100 with Rowan Construction Group. That range is not an estimate. It’s the price band we write into quotes after we measure your kitchen, inspect the substrate, and specify the materials. What drives the spread:

  • Cabinet installation: $4,720 to $15,340. Stock cabinets land at the low end. KraftMaid and Wellborn semi-custom land higher because the boxes are built to the inch, not the nearest 3-inch increment.
  • Countertop installation: $2,360 to $7,670. Laminate at the low end. Cambria or Caesarstone quartz in the middle. Natural stone with complex edge profiles at the top.
  • Backsplash installation: $945 to $2,950. Ceramic tile you can buy by the box is the low end. Handmade or glass tile that requires a wet saw and slow installation is the high end.
  • Kitchen island installation: $3,540 to $11,800. A basic island with a prefab top is the low end. An island with a sink, new plumbing, and custom cabinetry is the high end.

Every quote includes the Quikrete setting materials, labor, jobsite cleanup, a written warranty, and the documented photo record we take on every visit. Under Clause 1 of the Haven Standard, the price you see in writing is the price you pay. No change order gets signed without you seeing the number first.

Scope Los Angeles Installed Range
Full Kitchen Remodel $16,520-$53,100
Small Kitchen Remodel $10,620-$23,600
Cabinet Installation $4,720-$15,340
Countertop Installation $2,360-$7,670
Backsplash Installation $945-$2,950
Kitchen Island Installation $3,540-$11,800

DIY or Call Us?

You can safely check the obvious things: tap tiles for hollow spots, run a fingernail along grout lines to test for crumbling, and look under the sink for signs of water that’s been sitting. What you should not do is pull up a cracked tile and try to reset it with a bag of Quikrete from the hardware store. If the tile debonded, the rest of that floor section is likely on the same path, and a patch job leaves you with a visible seam and a substrate problem that keeps spreading underneath.

Grout regrouting is the one job a careful homeowner can often do themselves in an afternoon, and we’ll tell you honestly if that’s the case when we look at it. But if the failure is in the mortar bed or the leveling compound, that’s a demo-and-reset job that needs a scarifier, proper dust control, and a moisture test before anything gets reinstalled. We’re happy to walk you through what we found. Call (470) 298-9650 and we’ll send someone out. The estimate is free, and you’ll have a written number in hand either way.

FAQs

A finished backyard cottage with a small covered porch

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch