A home with a brand-new roof and gutters at golden hour

Quikrete Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A new clay tile roof
A newly finished roof with a ridge vent and step flashing
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
A new casement window over a kitchen sink
A new white vinyl privacy fence with a double gate
New painted shaker cabinets with an organized deep drawer
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Quikrete Roofing: The Los Angeles Owner’s Guide

Quikrete roofing products in Los Angeles typically involve their cement-based roof coatings, sealants, and repair compounds rather than shingles or tiles. A full Quikrete roof coating or patch project in LA runs $470 to $2,125 installed, depending on square footage and surface condition. Most homeowners discover an issue when they see water staining on the ceiling after the first real rain or notice the coating peeling at the edges like old paint on a curb.

Call (470) 298-9650

We keep the common Quikrete roof repair products on hand and can usually match what’s already on your roof by visual check and label. Quikrete is a material manufacturer, not a roofing system brand, so what you’re actually dealing with is a cementitious coating, patching compound, or sealant applied over a substrate, and the failure is almost always at the surface or at a transition point like a vent pipe, parapet wall, or drain. That’s where the water finds the path.

Which Quikrete Models This Applies To

A new roof with clean valleys and new flashing

Quikrete’s roofing line breaks into three practical groups. Their wet patch cement products (often labeled as roof sealant or wet patch) are used on flat and low-slope surfaces common across Los Angeles from West Adams bungalows to Mid-City commercial conversions. Their acrylic and elastomeric roof coatings seal resurfaced flat roofs and protect against UV breakdown, which hits hard out here, where a south-facing roof takes 300-plus sunny days a year. Their concrete and mortar mixes get used for tile roof repair beds and flashing work on Spanish and Mediterranean styles from Hancock Park to El Sereno.

The compatibility gotcha with Quikrete coatings is the recoat window. You need to know whether the existing coating is water-based acrylic or solvent-based, because a solvent-based coating over a fresh acrylic one will lift it, and then you’re doing tear-off work nobody budgeted for. We identify that on site before we quote. On the OEM versus aftermarket question, Quikrete doesn’t run a proprietary parts ecosystem like a window manufacturer would, so the decision is really about spec matching: meeting the same ASTM rating and thickness that the existing coat was applied at. Rowan Construction Group is an independent contractor, not affiliated with Quikrete, and we quote materials by spec, not by loyalty.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Quikrete Roofing Is Failing

  • Blistering or bubbling in the coating. This means moisture got trapped under the surface layer, either from a pinhole leak or from coating over a damp substrate. In Los Angeles it often shows up after a marine layer stretch when the roof never fully dried.
  • Chalky residue when you touch the surface. UV degradation is releasing pigment and binder. It means the coating is at the end of its functional life and will start eroding faster, especially on flat sections that pond water.
  • Alligator cracking in a network pattern. The coating has lost flexibility. Los Angeles temperature swings from 45 at night to 95 by noon put thermal stress on the surface every single day, and rigid cementitious coats fail this way first.
  • Water staining on ceilings or at the top of wall seams. The coating may look fine, but transitions, parapets, and scuppers are the first points of failure. The leak is almost never in the middle of the field.
  • Exposed aggregate or fibrous texture showing through. The coating has worn down to the original roof surface. On built-up and modified-bitumen roofs under Quikrete coats, this means you’re down to nap layer and patching is a stopgap, not a fix.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roofers installing a new roof with safety harnesses

Roof repair work on a Quikrete-coated surface in Los Angeles runs $470 to $2,125 based on what we find. A straightforward patch and recoat over a small area is at the low end. Full resurfacing with prep, primer, and two coats of elastomeric on a larger flat roof pushes toward the top. Roof replacement, if the substrate has failed and we’re tearing off down to decking, runs $9,440 to $23,600, and at that point you’re deciding on a system, not just a coating.

What’s included either way: a written flat price before any work begins, under Clause 1 of The Haven Standard, a written scope that names the materials and coverage, a documented photo record of the condition before and after, and our Done Right Promise. If it’s not right, we make it right. We carry the common Quikrete patch and coating products, along with GAF and Owens Corning materials for larger roof work, so the written quote reflects real material pricing, not a guess.

DIY or Call Us?

You can safely inspect a flat roof from a ladder, note where the coating looks thin or cracked, and take photos. What you should not do is climb onto a pitched tile roof or start grinding off failed coating without fall protection, and you shouldn’t attempt any patching if the decking feels soft underfoot, which signals structural water damage. A 20-foot fall doesn’t care how much you saved on labor.

The middle ground is honest: small patch jobs with Quikrete wet patch over a clean, dry surface are doable for a careful homeowner. The problem is that most Los Angeles roof failures we see are not small by the time they show up inside the house. The coating may look fine from the ladder, and the water is working its way through at a seam. Measure twice, say it once, show your work. Rowan Construction Group has spent nearly two decades on Los Angeles County roofs, and if you’d rather not guess, call (470) 298-9650 and we’ll give you a written price before anyone touches a brush.

FAQs

A remodeled family room with new windows and a window seat

How long does a Quikrete roof coating last in Los Angeles? Five to seven years is realistic for a properly applied coating on a Los Angeles roof, because UV exposure here is relentless and the sun is the coating’s real enemy, not the rain. South-facing sections will break down first, and we recommend an inspection at year four to catch wear before it becomes a leak. Call (470) 298-9650 if you want us to look at it and tell you what’s left.

Can you repair the coating instead of replacing it? Yes, if the substrate is sound and the failure is isolated, we can patch and recoat the affected areas for $470 to $1,200, and that is often the right answer for a mid-life coating. If the cracking is widespread or the decking is soft, patching buys you a season, not a roof. Call (470) 298-9650 and we’ll tell you which one you’re looking at, with photos to prove it.

How long does the repair or recoat take? A patch and single-zone recoat on a Los Angeles flat roof typically takes one day, with a second day if we’re doing a full two-coat resurfacing and need cure time between coats. Weather windows are your scheduling constraint, and we plan around the marine layer so the surface is actually dry when we apply. Call (470) 298-9650 for a written schedule along with your written price.

Do you stock Quikrete roofing materials on hand? Yes, we carry the common Quikrete patch products, roof sealants, and acrylic coatings, plus matching primers, and we also stock materials from GAF and Owens Corning when the repair calls for a full-system fix instead of a coating patch. If your roof needs something we don’t carry, we source it before we quote, not after. Call (470) 298-9650 and we’ll match what’s actually on your roof.

Written by Rowan Construction Group, Rowan Construction Group at Rowan Construction Group, serving Los Angeles and nearby areas.

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch