A home with a brand-new roof and gutters at golden hour

Sakrete Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A new roof with clean valleys and new flashing
A new clay tile roof
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
A new multi-panel patio door opening a kitchen to the patio
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
A remodeled primary bathroom with a soaking tub and walk-in shower
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Sakrete Roofing: The Los Angeles Owner’s Guide

We install and repair Sakrete-compatible roofing systems across Los Angeles, with typical repairs running $470 to $2,125 and full replacements between $9,440 and $23,600 depending on the surface area and substrate condition. Most owners discover an issue after a heavy rain season, when a drip shows up on the ceiling or a visible crack forms along a parapet wall. Sakrete roofing in this context usually means a concrete-based roof coating, patch compound, or repair mortar, and when those materials fail, they fail in ways specific to our climate: UV breakdown, thermal expansion cracks, and water ponding on low-slope decks.

Call (470) 298-9650

Which Sakrete Models This Applies To

A newly finished roof with a ridge vent and step flashing

Sakrete makes a family of concrete and repair products, and the roofing-relevant ones in Los Angeles are typically their patching compounds, concrete resurfacers, and anchoring cements used on flat and low-slope roofs, parapet caps, and roof deck repairs. If you have a Sakrete product already on your roof, the label on the original bag or bucket matters: look for the product name printed along the top edge, plus the coverage square footage and the mix ratio. The most common compatibility issue we see is when a homeowner patches with a standard Sakrete concrete mix on top of an older elastomeric or acrylic roof coating. It will not bond long-term. Concrete patch does not flex, and the coating underneath does, so the patch cracks at the seam within one Los Angeles summer.

OEM versus aftermarket is less of a question here than with appliance parts. Sakrete is the manufacturer, and when we quote a repair, we specify the exact Sakrete product by name, or a direct equivalent we can get from our supplier that meets the same compressive strength and cure time. For a roof deck patch in Los Angeles, we typically want a polymer-modified product, because the unmodified mixes cure too rigid for a surface that sees 40-degree temperature swings between night and afternoon. That spec choice, documented in the written quote, is the difference between a patch that lasts three years and one that lasts ten.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Sakrete Roofing Is Failing

  • Hairline cracks running in a grid pattern across the surface. This is thermal cycling. The concrete expands during Los Angeles afternoons and contracts overnight, and without a flexible membrane over it, the surface eventually checks like old pottery.
  • Water ponding for more than 48 hours after rain. Low spots mean the original pour or patch was not sloped correctly. Standing water on a Sakrete-repaired deck accelerates freeze-thaw damage in winter and breeds moss in the shaded months, and each cycle worsens the low spot.
  • White mineral streaks or efflorescence on the ceiling below the roof. Water is moving through the concrete and carrying salts with it. By the time you see the stain inside, the water path has been open for weeks.
  • The patch edges are lifting, or you can slide a putty knife under them. That means the original patch was applied over a dirty or painted surface, and the bond failed at the interface. Water is getting under the patch and spreading laterally before it finds a way through.
  • Crumbling or sandy surface when you brush a hand over it. The top layer has lost its binder, usually from UV degradation or a bad original mix ratio. This is a surface that will keep releasing dust and aggregate until it is ground back and recoated.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

For Los Angeles, a Sakrete-product roof repair runs $470 to $2,125, which includes grinding back the failed area, cleaning the surface, applying the correct polymer-modified patching compound, and finishing with a compatible coating where the surface demands it. A full roof replacement with concrete deck work lands between $9,440 and $23,600, and the spread comes down to square footage, number of roof penetrations like vents and drains, and whether the substrate below the old surface is sound enough to keep. We write the line-item price before any work starts, and if we open the deck and find the underlying plywood or framing is rotted beyond what the quote assumed, no work proceeds until you sign a change order with the new number in writing. The workmanship warranty is included in the written scope. You can check the terms with us by calling (470) 298-9650 before you commit to anything.

DIY or Call Us?

You can safely inspect your own roof: sweep the debris, note where water ponds, photograph the cracks with a ruler next to them for scale, and send us the photos. That is useful, and it costs you nothing. What we do not recommend is mixing and applying Sakrete patching compound yourself on a roof deck, because the failure mode is not mess; it is water. A badly mixed batch, or an application over a surface that has not been properly cleaned, fails at the bond line within a season, and by then water has been working its way into the framing for months. Roof deck work in Los Angeles also means working at height, and the safety equipment is not worth buying for one patch. Call us at (470) 298-9650, describe what you are seeing, and we will give you a written price for the repair before you decide anything.

FAQs

Roofers installing a new roof with safety harnesses

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch