A new herringbone paver driveway

Sakrete Home Additions & ADU Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A new paver patio with a seat wall and fire pit
A new paver pool deck
A new casement window over a kitchen sink
A new white vinyl privacy fence with a double gate
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Sakrete Home Additions & ADU: The Los Angeles Owner’s Guide

When a Sakrete product is part of your home addition or ADU project in Los Angeles, the concrete mix, anchoring cement, or repair mortar you chose matters more than most people realize. We install and integrate Sakrete products on a regular basis across Los Angeles, and a full home addition or ADU build that includes Sakrete materials typically runs $53,100 to $153,400 depending on scope, foundation condition, and finish level. If you’re reading this because a pour cracked, an anchor failed, or a patch is crumbling, the short version is: get the part matched correctly, don’t ignore water intrusion at the seam, and call us at (470) 298-9650 for an honest assessment before the problem migrates into framing or slab work.

Call (470) 298-9650

In Los Angeles, the freeze-thaw cycle that plagues other cities is not your main enemy; it’s the combination of expansive clay soils, seasonal dryness that shrinks the ground, and the occasional heavy rain that swells it. Those forces attack the bond between the Sakrete material and the substrate, and they don’t announce themselves until something visible shifts.

Which Sakrete Models This Applies To

A crew setting pavers over a compacted base

Sakrete makes the full range of bagged concrete and repair products: High-Strength Concrete Mix, Fast-Setting Concrete Mix, Anchoring Cement, Sand Mix, Top’n Bond, and the Pro-Mix line. For home additions and ADUs in Los Angeles, the products we most often encounter are Fast-Setting Concrete Mix for fence posts and small footings, Anchoring Cement for bolts and sill plates, and Top’n Bond for repair work on existing slabs. The compatibility issue that trips up most owners is simple: not all Sakrete products cure at the same rate or reach the same compressive strength. A High-Strength mix rated at 4,000 PSI after 28 days is not the same material as a Fast-Setting mix rated at 3,000 PSI, and using the wrong one for a load-bearing application will show up as cracking within the first year, not the first decade.

We are an independent contractor, not affiliated with Sakrete, which means we can be straight with you about the OEM-vs-aftermarket decision. For raw bagged concrete, the product itself is the product; there is no meaningful aftermarket equivalent that changes the chemistry. The failure we see is not the mix, but the application: the wrong mix for the job, insufficient mixing time, water added on site to make it flow, or a pour that skipped the dowel-into-existing-slab step. Those are process problems, and they are what we fix. The label on the bag tells you the PSI rating, the aggregate size, and the set time; if you can read those three numbers, you can tell us exactly what you have, and we’ll tell you whether it was right for what you built.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Sakrete Home Additions & ADU Is Failing

  • Cracks wider than a dime along the seam where new concrete meets old slab. This usually means the existing slab was not doweled or keyed, so the new pour is moving independently of the foundation. In Los Angeles clay soil, that movement is seasonal and it does not self-correct.
  • A powdery, chalky surface on a patch or repair. That’s spalling from too much water in the mix or curing that happened too fast in direct sun. The top layer is lost; what remains is weaker than the rated strength.
  • Sill plate anchors that wiggle or spin when you tap them lightly. A failed anchor bolt in anchoring cement usually means the hole was not cleaned before install, or the mix was over-watered. Either way, the connection between wood and concrete is compromised, and that is a structural issue in a Los Angeles seismic zone.
  • Water staining or efflorescence at the base of an ADU wall. White mineral deposits mean water is moving through the slab or up the seam, carrying salts from the concrete. The concrete is not failing yet, but the vapor barrier or the seal at the foundation edge is.
  • A step or walkway that has settled or tilted in under two years. If you set posts or poured footings that are already out of level, the base below the concrete is insufficient or the soil was not compacted. Adjacent concrete never “just settles” in Los Angeles without a cause.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new roof with clean valleys and new flashing

For a full home addition or ADU that includes Sakrete products, the installed range in Los Angeles is $53,100 to $153,400. The number is broad because an ADU is not one job, it is three: the foundation and slab work, the framing and enclosure, and the interior finish. The Sakrete portion (footings, slab, anchor bolts, any repair patching) typically represents $8,000 to $30,000 of the total, depending on whether you are pouring a new slab for a 400-square-foot ADU or adding a 600-square-foot ground-up addition with footings that have to meet Los Angeles Department of Building and Safety standards for expansive soils.

What drives the range: site access (can a concrete truck reach the pour, or are we hauling bags manually), soil condition (expansive soils may require deeper footings or a soil report), and the current state of any existing slab we are tying into. When you call, we will walk you through the specific Sakrete products involved, the PSI required for your application, and the line-item price. No change proceeds without a signed change order, per Clause 1 of the Haven Standard, so the number we write down is the number you plan around. Every visit includes a documented photo record before, during, and after, so you can see exactly what was poured, doweled, anchored, and cured.

DIY or Call Us?

Here is the honest split from someone who spent years at Los Angeles Trade-Technical College learning exactly how many ways concrete work goes wrong. There are cosmetic repairs a careful owner can handle with a Sakrete product: a hairline surface crack in a non-structural patio slab that does not widen, a small chip on a step edge, a fence post hole where the existing concrete is intact and you are resetting one post. The bag gives you the mix, and if you follow the water ratio exactly and do not add a splash “to make it flow,” you will be fine.

But here is what we see when DIY goes wrong in Los Angeles: a homeowner replaces a sill plate anchor with the wrong Sakrete product, over-waters it, skips the hole-cleaning step, and the anchor fails within a season. The wall is now connected to the foundation by a cement plug that is doing nothing, and the fix is not a squeeze tube; it is drilling out, cleaning, and re-anchoring correctly. If the problem is structural, if it involves a load-bearing wall, or if you’re not certain which Sakrete product belongs in the application, call us at (470) 298-9650. The consultation is free, and we will tell you plainly whether it’s a weekend job for you or a one-day job for the local pro.

FAQs

A new multi-panel patio door opening a kitchen to the patio

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch