Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Driveway & Pavers Across Chino Hills
Driveway and paver work in Chino Hills costs more than the national average because the job has to account for two conditions most cities don’t share: expansive Puente Hills clay beneath the slab and CAL FIRE Very High Fire Hazard Severity Zone requirements at the edges where hardscape meets structure. A paver driveway here typically runs $7,000-$18,000, and a concrete driveway installation lands between $4,500 and $12,000. We’ve worked the hillside tracts off Butterfield Ranch Road, through the cul-de-sacs near Los Serranos, and up against the fire-prone canyons south of Soquel Canyon Parkway long enough to know that getting the base right matters more than the paver selection. Call (470) 298-9650 and we’ll send someone who can tell you what’s actually under your current driveway before we quote a replacement.
Why Rowan Construction Group Is Chino Hills’s Preferred Driveway & Pavers Company
Rowan Construction Group has been writing flat prices before any tool leaves the truck since 2007, and that habit matters more in Chino Hills than in most places. The 30-to-40-year-old tract homes throughout the city sit on mass-graded cut-and-fill pads, which means two driveways on the same street can behave completely differently depending on how the fill was compacted in 1992. We price that soil reality into the written quote, not into a change order after we’ve started digging.
Our Driveway & Pavers crews arrive background-checked, uniformed, and carrying a documented photo record of everything we find once the old concrete comes out. That record is part of every visit, not an upgrade. When a Chino Hills homeowner brings us a competitor’s estimate, we review it line by line at no charge-the Free Second Opinion is a standing offer, and it’s how a lot of our customers first hear about us.
Grant Rowan runs the operation under The Haven Standard, which puts the written price before the work in Clause 1 and keeps the 365-Day Done Right Promise in writing, not in a handshake. A live person answers our phone 24/7. When something goes wrong with a fresh driveway in Chino Hills, you talk to a person, not a voicemail tree.
Our Driveway & Pavers Services in Chino Hills

Paver Driveways
Paver driveways are the right answer for most Chino Hills hillside lots because interlocking concrete pavers flex at the joints instead of cracking when the montmorillonite clay expands and contracts with seasonal moisture. On a cul-de-sac off Butterfield Ranch Road, our crew replaced a cracked 1990s concrete driveway with a paver driveway after the original slab had heaved from clay expansion. We removed the failed concrete, installed a deeper gravel base with geotextile fabric to isolate movement, and laid interlocking concrete pavers with sand joints that flex instead of crack. The new driveway also created a 5-foot noncombustible zone along the garage wall, easing the owner’s fire-insurance inspection. In Chino Hills, paver driveway installation runs $7,000-$18,000 depending on square footage, slope, and access.

Concrete Driveways & Concrete Work
A poured concrete driveway in Chino Hills needs a thicker slab and closer rebar spacing than what you’d pour in Chino or Ontario, because the expansive soil here moves in ways flat-ground cities don’t. Improperly compacted fill on the older hillside pads leads to differential settlement, creating low spots where water ponds and accelerates joint erosion. We spec control joints based on the actual slab shape and the soil report, not a template. Expect $4,500-$12,000 for a new Chino Hills concrete driveway, with the higher end reflecting deeper excavation and engineered base work on bad soil.

Asphalt Driveways & Resurfacing
Asphalt is less common in Chino Hills than in the flatter Inland Empire, but it works for long shared driveways and utility paths in the more rural pockets near the state park edges. The same clay issues apply: we overlay on a compacted aggregate base and seal the edges so irrigation runoff doesn’t eat the subgrade. Asphalt paving in Chino Hills runs $3,500-$9,000, and resealing an existing asphalt drive costs $250-$700.

Driveway Repair & Replacement
When a Chino Hills driveway has heaved, cracked at every control joint, or pulled away from the garage slab, we document what we find before quoting the fix. Sometimes the failure is surface-level settlement we can address with slab jacking or a paver overlay. More often on the 80s and 90s hillside pads, the base itself has failed and full replacement is the honest answer. Full driveway replacement in Chino Hills runs $5,000-$14,000. Every quote includes a written scope and a written warranty, and no change proceeds until you sign the change order.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Chino Hills
We quote and install Belgard and Techo-Bloc pavers because they hold up to the UV exposure and temperature swings in the Chino Hills canyons, where summer highs pass 105°F and Santa Ana winds carry embers across exposed hardscape. Our sourcing runs through fifty-plus vetted material brands, which keeps the written quote honest instead of inflated. When a Chino Hills homeowner wants a specific paver profile or color from a catalog, we check stock at our Inland Empire yard and bring samples to the estimate. What you see in the quote is what gets ordered, and the paperwork shows it.
Common Driveway & Pavers Problems We See in Chino Hills Homes

- Expansive clay heave under 1980s-90s cut-and-fill pads. The montmorillonite clay beneath Chino Hills swells and shrinks with seasonal moisture cycles, causing concrete slabs to heave, separate at control joints, and undermine paver sand beds. Contractors coming up from flatter Inland Empire streets underestimate this pattern until their first callback.
- Santa Ana ember accumulation where driveways meet wood-framed garage walls. Wind-driven embers pile up against combustible siding if the hardscape doesn’t extend far enough from the structure. A properly sized paver or concrete apron creates the noncombustible clearance that fire inspectors and insurance underwriters look for.
- Differential settlement from improperly compacted hillside fill. Low spots form where water ponds after rain, accelerating joint erosion and paver displacement. We see this most often on the original driveways in tracts developed in the late 1980s and early 1990s.
- Pooling water at garage approaches on sloped lots. Chino Hills’s hillside grading means driveway slope often drains toward the house rather than away. Without proper swale design and edge drainage, water works into the slab joint and the garage threshold joint, which is where failure starts.
Pricing for Driveway & Pavers in Chino Hills, CA
Chino Hills pricing is set by soil conditions, fire-zone clearances, and the slope of the pad you’re working on. A paver driveway runs $7,000-$18,000, concrete runs $4,500-$12,000, and a full replacement lands between $5,000 and $14,000. What moves the number is access (steep driveways need different equipment), whether we’re removing old concrete, how deep the base has to go to isolate expansive clay, and the paver or concrete finish you select. We write the flat price and the scope before work starts, per Clause 1 of the Haven Standard, and the price you sign is the price you pay unless you sign a change order. Call (470) 298-9650 for a written estimate.
| Driveway & Pavers Service | Chino Hills Price Range |
|---|---|
| Paver Driveway Installation | $7,000-$18,000 |
| Concrete Driveway Installation | $4,500-$12,000 |
| Driveway Replacement | $5,000-$14,000 |
We Also Serve Cities Near Chino Hills

Our crews cover Chino Hills and the surrounding Inland Empire communities. If you’re in Pomona, Diamond Bar, Chino, or Montclair, you’re within our regular service radius, and the pricing model is the same: a flat written price before work starts, a signed change order before anything moves, and the 365-Day Done Right Promise on every job. Learn more about our Driveway & Pavers in Chino Hills service area, or call us for a quote on your specific street.
Serving Chino Hills, CA - Our Local Coverage Area
We’re based in the Chino Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Driveway & Pavers in Chino Hills

A full driveway replacement in Chino Hills generally requires a permit, especially when the work changes the driveway’s footprint or grade, and because nearly all of the city sits in a CAL FIRE Very High Fire Hazard Severity Zone, the hardscape-to-structure clearance rules apply. We pull permits and pass inspections as part of the job. Call (470) 298-9650 and we’ll tell you what applies to your property before you pay anything.
Your friend in Chino is on flat alluvial soil, while your Chino Hills home sits on expansive Puente Hills clay that was cut and filled to create a buildable pad in the 1980s or 1990s. When that montmorillonite clay gets wet it expands, and when it dries it shrinks, and the concrete slab on top can’t flex with the soil’s movement, so it cracks. The fix is a deeper base and pavers or a heavier reinforced slab designed for this specific ground. Call (470) 298-9650 to get a written quote for your lot’s conditions.
Yes. Interlocking pavers and properly sized concrete aprons create a noncombustible zone along the garage wall and the home’s perimeter, which reduces the chance that Santa Ana-driven embers will pile up against combustible wood siding. In a CAL FIRE-designated Very High Fire Hazard Severity Zone like most of Chino Hills, that clearance also matters to your fire-insurance inspection. We can design the paver layout so it serves the Chapter 7A ignition-resistant requirement and handles the soil movement at the same time. Call (470) 298-9650 for a driveway that does both.
We start by removing the failed slab and inspecting what’s actually under it, and we bring a documented photo record of what we found. Then we install a deeper gravel base with geotextile fabric to isolate the clay from the sand setting bed, so the seasonal swelling and shrinking doesn’t telegraph through the pavers. The pavers sit in sand joints that flex instead of crack, which is why we recommend pavers over poured concrete on most Chino Hills hillside pads. Call (470) 298-9650 and we’ll walk your property and tell you what your pad needs.
Every quote includes a written flat price, a written scope of work, the paver or concrete product specified by brand and profile, the base depth we’re using for your soil conditions, the fire-zone clearances we’re meeting, and a written warranty. No work proceeds on any change until you sign the change order, which is the administrative discipline that has kept our project costs within a few percent of the agreed price across 4,000-plus jobs since 2007. Call (470) 298-9650 to schedule your free estimate.
Contact Rowan Construction Group in Chino Hills
If your Chino Hills driveway has cracked along every control joint, heaved from clay expansion, or stopped draining properly, we’ll send someone who can tell you what’s underneath it and what it will cost to fix in writing. Call (470) 298-9650 to schedule a free estimate. We serve all of Chino Hills’s hillside tracts, canyon neighborhoods, and the flatter edges near the city’s borders, and we’ll bring the paver samples, the soil questions, and the written price before anyone touches a shovel.
Written by Grant Rowan, Owner at Rowan Construction Group, operating under The Haven Standard across Southern California since 2007.







Before
After
Before
After