Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterFast, Reliable Fence Installation Across Bedford
Fence installation in Bedford, TX typically runs $3,500 to $9,000 for a standard vinyl privacy fence on an average lot, with aluminum running $4,000 to $10,000. The number that matters more than the headline range is the one we put in writing before any crew shows up. Rowan Construction Group has delivered 4,000-plus projects under that exact discipline since 2007: a flat written price with a written scope, signed before anyone picks up a post-hole digger.
Bedford is not a city where you can wing a fence line. At 3.6 square miles and fully built out, every job here is on an existing lot, usually a 1970s or 1980s tract home with mature roots, clay soil, and boundary lines that have drifted since the Reagan administration. We work in Bedford weekly, and our crews know the difference between a clean post-hole dig on Harwood Road and an auger fight through post-oak roots off Central Drive. Call (470) 298-9650 to schedule a written estimate.
Why Rowan Construction Group Is Bedford’s Preferred Fence Installation Company
Bedford homeowners read the three-star reviews before they call anyone. We respect that. What we show up with is not a sales pitch, it is a documented record: a written price, a written scope, background-checked uniformed technicians, and a photo record delivered when the crew leaves. That has been the operating standard since Grant Rowan founded the company in 2007, and it applies to every fence, patio, roof, and addition we build in Bedford.
Our scheduling is coordinated from the brand’s Dallas-Fort Worth office, so a live person answers the phone around the clock, and crews dispatch to Bedford without the lag time of a distant shop. The Fence Installation team serving Bedford includes technicians who have pulled permits at Bedford’s building department, dealt with clay-soil setbacks on Shady Brook lots, and reset property lines on homes where the original 1983 survey pins vanished under tree roots.
Under Clause 1 of the Haven Standard, the price is written before anyone starts. That is not a marketing phrase. It is the administrative discipline behind our 365-Day Done Right Promise: if it is not done right, we make it right. No asterisk, no fine print, no “ask the manager.” The guarantee is printed on the page and backed by a terms page. If you have a competitor’s written quote, bring it in. We will review it line by line at no charge.
Our Fence Installation Services in Bedford
Privacy Fence
Privacy fence is the workhorse of Bedford’s older neighborhoods, where single-story brick ranch homes sit close together and mature trees shade most backyards. We build cedar and treated pine privacy screens that match the original 1970s and 1980s tract-home character, with posts set below Bedford’s active shrink-swell zone rather than at the standard 24-inch depth. That depth matters here. A fence posts at 24 inches in Bedford clay will lean within two seasons.
Vinyl Fence
Vinyl fence installation in Bedford runs $3,500 to $9,000 for a typical residential lot. Vinyl resists the moisture swings that Bedford’s clay soil pushes into the base of every post, which makes it a practical choice on lots with irrigation systems or heavily landscaped beds near the fence line. The caveat in Bedford is roots: mature post-oaks and elms will bow a vinyl rail faster than they will crack a concrete footing, so we spec posts and rail spacing based on what the canopy actually looks like, not what a catalog shows.
Fence Repair
Fence repair in Bedford often intersects with two local realities: hail damage from spring storm lines and clay-soil heave. We replace rotted post bases, re-set leaning sections below the active soil zone, and rebuild damaged rail runs. When a fence has been hit by hail, we document every damaged board and rail in the photo record, then write the repair scope against what the documentation shows. You get the photos. The insurance adjuster gets the photos. Nobody has to guess what we found.
Aluminum Fence
Aluminum fence installation in Bedford runs $4,000 to $10,000. It is a common choice for pool enclosures and front-yard property lines on corner lots, where Bedford’s code requires sight-line clearances on the street-facing sides. Powder-coated aluminum holds up in Tarrant County heat without the fade that painted steel shows after a few summers. On Bedford lots with aggressive root systems, aluminum posts set in concrete will still shift if they are not deep enough, so we treat the footing depth as the primary spec, not the panel height.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Bedford
Rowan Construction Group sources across fifty-plus vetted brands, including Mighty Buildings and Cover for structural and prefabricated components. What that means for a Bedford homeowner is straightforward: the written quote reflects honest material numbers, not inflated ones. If we spec a particular fence system or post treatment, it is because the material holds up under Tarrant County clay and hail-season rain, and we can show you the documentation for why we chose it.
Common Fence Installation Problems We See in Bedford Homes
- Clay-soil heave pushing posts out of plumb: Bedford sits on expansive soils at the edge of the Blackland Prairie. Posts set at the manufacturer’s standard 24-inch depth will shift within two wet-dry cycles. We auger below the active shrink-swell zone on every Bedford fence, which adds a small amount to the quote line and removes a recurring repair line later.
- Mature post-oak roots cracking concrete footings: Bedford’s older lots, the ones built between 1965 and 1988, carry dense tree canopies. A handyman will pour a footing around a root and call it done. The root keeps growing, the footing cracks, the rail bows. We cut roots cleanly, adjust post spacing, and document what we did.
- Lost survey pins from the 1980s: On a Bedford tract home near the Shady Brook neighborhood, our fence crew discovered that the original 1983 survey pins were lost under decades of clay-soil movement. We reset the property line with a licensed surveyor before sinking any posts. That is what keeps a new fence from becoming a boundary dispute with a neighbor two years later.
- Polybutylene supply lines inside the fence permit: Bedford’s 1975-1985 build wave means many homes still have original polybutylene supply lines. Pulling a fence permit that intersects the yard can trigger a plumbing inspection that exposes those grey lines, a wrinkle a fence-only contractor from a neighboring city will not flag. We check for them before we auger, not after the inspector shows up.
Pricing for Fence Installation in Bedford, TX
Bedford fence pricing is a written number, not a phone call guess. A vinyl fence installation on a typical Bedford lot runs $3,500 to $9,000. Aluminum runs $4,000 to $10,000. The spread depends on linear footage, post depth below the active clay zone, root remediation, gate hardware, and whether we are pulling a permit that triggers additional inspections. What we do not do is quote low to win the job and then “discover” the cost later.
| Fence Type | Bedford Price Range |
|---|---|
| Vinyl Fence Installation | $3,500 - $9,000 |
| Aluminum Fence Installation | $4,000 - $10,000 |
Every Bedford fence quote includes the written scope, the written warranty, and a documented photo record when the crew leaves. There is no “call for a quote” in our process. There is a written price with your name on it. Call (470) 298-9650 to get one.
We Also Serve Cities Near Bedford
Bedford sits in the middle of the Mid-Cities corridor, and the same crews that know Bedford’s clay-soil setbacks and 1980s survey-pin issues serve the surrounding communities. We work regularly in Fence Installation in Bedford and the nearby cities of Colleyville, Euless, Hurst, and North Richland Hills. If you are in one of those cities and looking at a fence that has shifted or rotted at the base, the factors are usually the same, and so is the fix.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Fence Installation in Bedford
Yes, in most cases you still need a permit for a fence replacement in Bedford, even when the line does not move. The permit is what triggers the inspections that protect you later. It is also what can surface unpermitted work or polybutylene plumbing from the original build, which is better to know during the permit phase than after the fence is up. Call (470) 298-9650 if you want us to check the specific requirements for your address.
Yes. Bedford’s expansive clay soils move with wet-dry cycles, and the standard 24-inch post depth does not get below the active shrink-swell zone. We auger deeper on every Bedford fence, typically 30 to 36 inches depending on the lot. It adds a predictable amount to the written quote, and it prevents the lean that shows up two seasons later in fences set to the manufacturer’s minimum.
We hire a licensed surveyor to reset the property line before we sink any posts. On a recent Bedford tract home near Shady Brook, the original 1983 pins were gone entirely, and a neighbor’s fence had drifted onto the property by eleven inches. We reset the line, documented it, and built the fence where the plat said it belonged. Call (470) 298-9650 and we will check the survey record for your lot before the first estimate.
Document the damage before anyone repairs it. Photos, close-ups of split boards and dented rails, and a written note of when the storm hit. Then call us at (470) 298-9650. We will put together a written repair scope with our own photo record, which is what your insurance adjuster needs to see. A handyman repair with no documentation usually gets denied. A documented repair scope usually does not.
Yes, we match the original cedar privacy style, including board width, gap spacing, and top profile. Bedford’s 1970s tract homes carry a specific fence character, and we have built replacements that sit naturally next to the original sections on neighboring lots. The one thing we will not match is the original post depth, because the original depth is what failed. We set the new posts deeper and keep the visual character intact.
Get Your Written Bedford Fence Estimate
If you are in Bedford and you want a fence price on paper before anyone starts digging, call (470) 298-9650. We will schedule the inspection, document what we find, and deliver a flat written price with a written scope. If you have a competitor’s quote, bring it. We will review it line by line at no charge. That is the Rowan Construction Group way: the number in writing first, then the work.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Bedford fence installation with written pricing since 2007.