A home with a brand-new roof and gutters at golden hour

Boral Driveway & Pavers Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A new roof with clean valleys and new flashing
A new clay tile roof
A new wood side gate with black hardware
A new concrete driveway with a paver border
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
A new casement window over a kitchen sink
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Driveway & Pavers: The Los Angeles Owner’s Guide

We stock and install Boral-compatible driveway pavers and replacement units across Los Angeles, with typical installed repair work running $826 to $4,130 depending on the failed area, and full paver driveway installation running $8,260 to $21,240. Most Boral paver failures show up as one of two things: a cracked or chipped unit you can see from the curb, or a low spot that wasn’t there last spring and now holds water after every rain. You notice it, you walk past it for a few weeks, and then it starts bothering you every single time you pull into the driveway.

Call (470) 298-9650

Boral pavers in Los Angeles live a harder life than most people expect. The thermal swing between a January morning in the 40s and an August afternoon at 105 degrees cycles the concrete through expansion and contraction that slowly works on the paver’s edges and the sand joints between them. Add the UV exposure that breaks down polymeric sand over time, and what starts as a hairline crack becomes a spalled surface within a few seasons. The good news is that individual Boral units are replaceable without tearing out the whole driveway, provided the base underneath is still sound. We’ll get into how to tell below.

Key Takeaways:

  • Boral paver replacement in Los Angeles runs $826-$4,130 for a typical repair area; full installation is $8,260-$21,240.
  • Individual units can usually be swapped without redoing the base, if the base was compacted correctly in the first place.
  • We are an independent Los Angeles contractor, not affiliated with Boral, and we source OEM-compatible units plus quality aftermarket equivalents.
  • Written price before any work starts, signed change orders only, and a documented photo record on every visit.

Which Boral Models This Applies To

A newly finished roof with a ridge vent and step flashing

Boral’s paver line in the Los Angeles market splits roughly into two families: the larger-format driveway units (typically 60mm and 80mm thickness) and the thinner 40mm units intended for patios and walkways. The distinction matters because a 40mm paver used on a driveway that sees daily vehicle traffic will fail years earlier than a 60mm or 80mm unit, and no amount of perfect installation changes that math. If the failed paver in your driveway is a 40mm unit, the correct fix is usually to upgrade the entire traffic area to the thicker spec, not to swap in a matching thin paver and wait for it to crack again.

Identifying your exact Boral unit comes down to three things: the paver’s face dimensions (Boral’s common driveway sizes run 200×100mm, 200×150mm, and 300×300mm), the thickness, and the color name stamped on the original invoice or still visible on the underside of a lifted unit. Boral color names like Charcoal, Sand, and Harvest are specific, and matching a paver by eyeballing it against a photo is how driveways end up two-tone. We photograph the lifted unit, measure all three dimensions, and match against Boral’s current production before we quote anything.

On OEM versus aftermarket: Boral still manufactures many of its Los Angeles-distributed lines, which means OEM units are available for most common colors, but lead times run longer than most owners want to wait. Quality aftermarket equivalents from manufacturers using the same concrete mix design and color pigment systems are typically in our local supply chain within days, not weeks. We’ll tell you which is which on the written quote, because Clause 1 of the Haven Standard is that the price and the scope are written before anyone starts, and that includes naming the actual paver source.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Driveway & Pavers Is Failing

  • Standing water in low spots that didn’t exist before. This is the earliest and most reliable symptom. It means the base material beneath that paver area has begun to settle or erode, usually from water getting through failed sand joints. In Los Angeles’s clay-heavy soils, the wet-dry cycle accelerates this settlement once it starts.
  • Cracked or spalled paver surfaces. Spalling, where the top surface flakes off in thin layers, is the classic sign of a paver that has absorbed water and then gone through freeze-thaw cycles, which in Los Angeles happens more often at elevation in places like the Santa Monica Mountains foothills than people expect.
  • Chipped edges and widening joints between units. Loose pavers shift under vehicle load, and the edges grind against each other. Once a joint opens up beyond about 1/4 inch, the interlock is compromised and the paver starts moving independently.
  • Visible sand loss after rain or washing. If you see sand washing down the driveway after a storm, the polymeric sand in the joints has degraded. UV exposure and water both break it down, and once it’s gone, the pavers lose lateral support.
  • A sunken paver that rocks when you step on it. This tells us the bedding sand layer beneath that specific unit has washed out or compacted unevenly. It’s the one symptom that is nearly always repairable without touching the rest of the driveway, as long as it’s caught before the surrounding units start shifting too.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roofers installing a new roof with safety harnesses

For a typical Boral paver repair area in Los Angeles, our written quotes land between $826 and $4,130. The range reflects what we find when we lift the failed units: a straightforward paver swap with new bedding sand and re-sanding of the joints sits at the lower end, while a repair that requires removing a larger section, re-compacting the base, and re-laying two dozen or more units lands at the upper end. A full Boral paver driveway installation runs $8,260 to $21,240, with the spread driven by square footage, site access, and whether the existing base can be reused or needs to be excavated and rebuilt.

Every quote includes the parts, the labor, the bedding and joint sand, haul-away of the removed material, and a written scope that says exactly which units get replaced and why. The price is flat and written before work begins. If we open up the area and find the base failure is worse than the quote assumed, no additional work proceeds until you sign a change order that spells out the revised scope and cost. That’s not a courtesy, it’s the operating rule that has kept our project costs within a few percent of the agreed price across 4,000-plus jobs.

We also stand behind the work with the Done Right Promise: if the repair isn’t done right, we make it right, and that guarantee is printed where you can read it, not hidden in an asterisk.

DIY or Call Us?

There are two things an owner can safely check before calling us, and both are useful. Walk the driveway after a rain and mark every low spot that holds water with a piece of tape or chalk, then photograph each one. Lift one loose paver if it’s already coming up easily, photograph the underside so we can read any stamped codes, and measure the thickness. That information lets us give you a tighter preliminary range over the phone.

What we don’t recommend is attempting to re-set multiple pavers yourself. The concrete units are heavy enough to injure a back or crush a finger if one drops during handling, and the real risk is invisible: if you re-lay pavers on a base that has already failed, you’ll redo the job in 18 months and spend twice. The base compaction and edge restraint are the actual repair, not the paver itself. If the paver you’re lifting sits near a utility line or a gas meter, the stakes go up further. Call us at (470) 298-9650 and we’ll schedule a walk-through, take the measurements, and put the number in writing.

FAQs

A wood double vanity with two mirrors after a bathroom remodel

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch