A home with a brand-new roof and gutters at golden hour

Boral Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A new clay tile roof
A newly finished roof with a ridge vent and step flashing
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
New double-hung windows in a dining room
A new front yard fence with a matching gate
A new paver pool deck
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Roofing: The Los Angeles Owner’s Guide

Boral roof replacement in Los Angeles typically runs $9,440-$23,600 installed, with most tile repairs falling between $710 and $2,950 depending on the extent of the breakage and whether the underlayment is compromised. We stock Boral-compatible tile profiles and trim pieces at our Los Angeles yard, and most homeowners reach us the same week they notice a crack. How you usually discover the problem: a tile slides out of place after a Santa Ana wind event, or you spot a rust-colored streak near a valley, or a neighbor’s tree dropped a branch and you hear the crack from inside the house.

Call (470) 298-9650

What you may not realize is that a single broken Boral tile is rarely just a tile. In Los Angeles, the real question is what happened to the underlayment beneath it. That’s what we inspect first, every time. And because we’re an independent contractor, not a Boral affiliate, we can tell you honestly when the tile is the problem and when the roof system underneath is.

Which Boral Models This Applies To

New architectural shingles with a clean valley

Boral’s roofing line in the U.S. market centers on concrete and clay tile profiles. The ones we match most often across Los Angeles homes are the flat-profile Boral Tile in the “Slate” and “Shake” profiles, the Boral Country Slate, and the Boral Villa barrel profile you’ll see on Spanish-style homes from the 1980s through today. There’s also the Boral Saxony Slate, which gets specified on a lot of newer hillside construction because it holds up well to the wind exposure those roofs take.

Here’s the compatibility gotcha most Los Angeles owners hit: Boral changed tile dimensions slightly across manufacturing generations. A Country Slate from 1995 does not always interlock cleanly with a Country Slate made in 2015. The profile looks close, but the roll and the side lap can be off by a few millimeters, which means water. When we match a tile, we measure the exposed width, the butt thickness, and the profile depth before we quote anything. If it’s a discontinued run, we go to salvage and reclaim channels we’ve used in Los Angeles for years rather than forcing a near-miss tile that will eventually leak. OEM Boral tile is the first choice; quality aftermarket equivalents exist for common profiles and cost about 15-20% less, but the color match is rarely exact, and on a prominent slope that matters.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Roofing Is Failing

  • Hairline cracks running across the tile face. In Los Angeles, this usually starts as thermal stress: hot days, cold nights, and zero rain for months. Small cracks expand, water gets in, and the freeze-thaw cycle almost never hits us here, but the spalling does. Once a tile is cracked through, it’s no longer shedding water.
  • Tile slippage after wind. Santa Ana winds in the foothills and canyon communities push tiles out of alignment. When you see a tile shifted even an inch, the nail or fastening clip beneath it has likely given way. That’s the point where water intrusion starts, not when the tile slides all the way off.
  • Dark staining at the eave or inside the attic. Boral tile is excellent at what it does, but the roof’s real waterproof layer is the underlayment. Los Angeles sun degrades underlayment faster than almost any other climate variable. By the time you see a stain, that underlayment has been breached for a while.
  • Granule-colored dust in gutters or valleys. This is classic concrete tile spalling from LA’s UV exposure. The surface of the tile begins to erode, you’ll see the aggregate, and the tile loses its protective coating. Left alone, the tile cracks.
  • Broken pieces at the hip or ridge line. Hips and ridges take concentrated hits from falling branches and wind-driven debris. A broken hip tile exposes the mortar or flashing beneath, and that is a fast leak path in the winter rainy months.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roofers installing a new roof with safety harnesses

For a Boral roof replacement in Los Angeles, plan on $9,440-$23,600 for a full tear-off and re-tile on a typical 1,800-2,600 square foot roof. The spread comes down to roof pitch, number of stories, tile profile, underlayment upgrade level, and how much flashing needs rebuilding. For partial repairs, tile repair in the LA market runs $710-$2,950 for most jobs under about 100 square feet of tile work.

What that includes, every time, with us: the written flat price before anyone touches the roof, labor and material broken out line by line, tear-off and debris removal, new underlayment in the affected area or full roof, replacement Boral-compatible tile matched by profile and measured dimension, new fastening clips, and a written workmanship warranty. Under Clause 1 of our Haven Standard, the price is written before anyone starts. What changes a job mid-stream here is exactly one thing: a signed change order when we open the roof and find something the original scope didn’t account for. That’s the rule, and it applies to every roof we touch in Los Angeles.

DIY or Call Us?

What you can safely do is document. Walk the perimeter, photograph the broken tile or the stain from the ground, and check the attic on a bright day for light penetration. That tells you the scope of the visible problem. What you should not do is get on a tile roof without proper fall protection and tile walking technique. Boral tile breaks under concentrated foot pressure, and a two-story roof in Los Angeles is a long way down. If the issue is one or two clearly identified tiles and you have safe ladder access from the edge, a careful homeowner can sometimes make it work, but the rule we tell every LA owner is this: once you are past a ladder’s reach or on any roof with a pitch over 4:12, leave it to a crew with the right harnesses and the right insurance.

If you’d rather send us the photo and let us tell you what we think it will cost, your estimate is free. Call (470) 298-9650 and we’ll tell you what we can quote before we send anyone out.

FAQs

A galley kitchen opened up to the dining room with a new peninsula

How long does Boral roofing last in Los Angeles? Boral concrete tile roofs in Los Angeles typically last 40 to 50 years, with the tile itself often outlasting the underlayment underneath it; expect to replace the underlayment once around the 20 to 25 year mark even if the tile is still sound. The roof’s lifespan depends on how well the underlayment is maintained and how much wind exposure the home gets. Call (470) 298-9650 and we’ll look at what you have before you spend on anything.

Can a broken Boral tile be repaired instead of replacing the whole roof? Yes, individual broken or slipped Boral tiles can almost always be repaired or replaced without touching the rest of the roof, typically for $710-$2,950 in Los Angeles depending on how many tiles are involved and what state the underlayment is in. The key is getting the replacement tile matched to the existing profile and color. Call (470) 298-9650 and we’ll tell you from photos whether this is a spot repair or a bigger conversation.

How long does a Boral tile repair take? A typical Boral tile repair on a Los Angeles home takes half a day to a full day, including setup, repair, and the documented photo record we leave with you. If we’re replacing underlayment in a larger section, that can extend to two to three days. You’ll get a written timeline in the quote before any work starts.

Do you stock Boral tile in Los Angeles? We stock common Boral profiles at our Los Angeles yard, including flat slate profiles and barrel profiles, and we have access to salvage channels for discontinued runs that other contractors don’t keep relationships with. We also source compatible aftermarket tile when an exact Boral match isn’t available and tell you the difference before we quote. Call (470) 298-9650 to find out if your tile profile is something we carry today.

Written by Rowan Construction Group, Rowan Construction Group at Rowan Construction Group, serving Los Angeles and nearby areas.

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch