A home with a brand-new roof and gutters at golden hour

CertainTeed Windows & Doors Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A standing-seam metal roof over a covered porch
New architectural shingles with a clean valley
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
New double-hung windows in a dining room
A new front yard fence with a matching gate
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CertainTeed Windows & Doors: The Los Angeles Owner’s Guide

If you have a CertainTeed window or door with a failed sash, worn weatherstripping, cracked glass, or a broken operator, we stock and install the parts to bring it back to working order. In Los Angeles, an installed replacement part for a CertainTeed unit typically runs $130 to $780 depending on whether it’s a balance, latch, crank, hinge, or insulated glass pack. Most parts jobs take under two hours on site once the correct component is matched to your series. The usual discovery is unglamorous: a window that won’t stay up, a patio door that grinds, a latch that no longer catches, or condensation fogged between the panes where the seal has failed.

Call (470) 298-9650

Which CertainTeed Models This Applies To

A new clay tile roof

CertainTeed has produced several window and door series over the years: the Bryn Mawr, New Haven, and Norwood single-hung and double-hung lines, plus the CertainTeed patio door and sliding door systems common in Los Angeles homes built between the mid-1980s and late 2000s. The fastest way to identify your unit is to check the spacer bar inside the glass, the hinge, or the balance shoe for an etched or stamped manufacturer code. Model labeling can also live on the top edge of the sash or on the head of the frame, often obscured by paint after years of repainting.

Here’s the compatibility gotcha we see every month in Los Angeles: CertainTeed used different balance systems in different production runs. A New Haven window from 1992 may take a coil balance, while the same model from 1999 uses a block-and-tackle balance. They are not interchangeable, even within the same series. That’s why we remove and measure the existing component before ordering anything. For locks, hinges, and operators, a quality aftermarket part from a manufacturer like Prime-Line or Wright Products often matches the OEM spec at 40% to 60% of the CertainTeed-branded price. For balances, glazing bead, and extruded vinyl parts, we prefer OEM or exact-profile aftermarket because a 1/8-inch profile difference means the part won’t seat.

We’re an independent Los Angeles service provider, not affiliated with CertainTeed. We do not label something “OEM” unless the part comes from a CertainTeed-authorized supply channel and we can show you the packaging. When we use a production-equivalent aftermarket part, we say so on the written line item, with the brand and part number.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CertainTeed Windows & Doors Is Failing

  • The window won’t stay open, or slams shut. The balance has lost tension or the shoe has slipped out of the jamb channel. On CertainTeed double-hungs, we see this more often on windows facing west in Los Angeles, where afternoon heat on the vinyl accelerates coil fatigue.
  • Condensation inside the glass, between the panes. The insulating glass unit seal has failed. In Southern California, the issue isn’t cold weather; it’s prolonged UV exposure degrading the butyl seal, particularly on unshaded south and west walls.
  • The sash drags, binds, or jumps when operated. A worn pivot bar or a bent balance channel. Los Angeles homes settle, and a 1/8-inch frame rack over twenty years is enough to change how the sash sits.
  • The patio door grinds or takes both hands to move. CertainTeed sliding doors rode on steel rollers, and those roller assemblies seize when the bearings flatten from years of dirt and dry cycles. The track may also be worn into a groove, which replacement rollers alone won’t fix.
  • The casement crank spins freely, or the locking points no longer reach. The operator gear has stripped, or the tie bar connecting the locking points has broken. Both are common on CertainTeed casement units now twenty-plus years old, especially when prior owners kept cranking a stiff sash instead of addressing the hinge.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roofers installing a new roof with safety harnesses

Here’s what an installed CertainTeed part costs in Los Angeles:

  • Sash balance replacement (per sash): $130 to $310 installed, including both balances and the shoe.
  • Insulated glass unit replacement (thermal pane): $280 to $780 installed, depending on size and Low-E spec.
  • Sliding door roller assembly (per door): $180 to $420 installed, including cleaning and aligning the track.
  • Casement crank, lock, and operator set: $210 to $510 installed.
  • Weatherstripping and seal package (per window): $95 to $240 installed.
  • Latch, handle, and keep for patio doors: $90 to $260 installed.

The range comes from part availability, glass size, whether the sash needs to come out for the repair, and whether we’re matching an existing finish. The written quote you get before work starts breaks down part cost and labor separately. You see what the part costs, what it costs to install it, and what the warranty covers. No lump sum, no “parts and labor” trick. Our Done Right Promise applies after the install: if the part fails within a year and it’s a defect or an installation error, we replace it at no charge.

DIY or Call Us?

What you can safely do: clean the track, inspect the weatherstripping, note the model code we described above, and photograph the failed part before calling us. What you should not DIY: removing an insulated glass unit, extracting a vinyl sash from its frame, or working on a balance with residual tension. Vinyl frame channel tolerances are unforgiving, and forcing a sash back in can crack the frame corner, at which point you’re replacing the whole window rather than the part. Same with patio door glass: an IG unit is heavy, and unweighting it wrong damages the frame permanently. This is not a warning about your competence. It’s a warning about the cost of a cracked vinyl frame.

If you’ve identified the part and want it done, call (470) 298-9650. We’ll ask for your model code, a photo of the failed part, and the rough size, then give you a written number before anyone comes out.

FAQs

New painted shaker cabinets with an organized deep drawer

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch