A living room with a wall of new windows and a sliding glass door

CGI Home Additions & ADU Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A new front entry door with glass sidelights
A new bay window with a cushioned seat
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
New architectural shingles with a clean valley
A new white vinyl privacy fence with a double gate
New painted shaker cabinets with an organized deep drawer
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Home Additions & ADU: The Los Angeles Owner’s Guide

If you have a CGI home addition or ADU and something on it has failed, you need two things: the right part matched to your structure, and a written price before anyone picks up a tool. We stock and install CGI-compatible components across Los Angeles, with most replacement work running $53,100-$153,400 depending on scope. Most owners discover the problem the way you probably did: a door that no longer closes square, a crack that appeared at a seam, or water where water should not be.

Call (470) 298-9650

Rowan Construction Group is an independent contractor. We are not affiliated with CGI, but we have worked on their structures across Los Angeles County long enough to know what fails, what holds up, and what the fix should cost in writing.

Which CGI Models This Applies To

New double-hung windows in a dining room

CGI builds prefabricated and panelized additions, and the compatibility question comes down to which generation of wall panel or roof cassette you have. The older CGI series used 2×4 framing with a 16-inch stud layout and a proprietary corner lock system; the newer lines switched to 2×6 framing at 24 inches on center with a different sill anchor pattern. You can identify your generation by pulling the interior trim at any corner and checking the stud width, or by locating the manufacturer sticker on the header above the main entry door.

For OEM parts, the older corner locks are the hardest to source; CGI moved inventory to the newer series years ago and Los Angeles suppliers that still carry the old locks charge a premium. In most cases, a quality aftermarket equivalent, milled locally to the same profile, performs as well for less. For roof cassettes, the fixing is more straightforward: the cam-lock connectors are off-the-shelf and interchangeable across both generations.

Compatibility gotcha: CGI roof cassettes from the pre-2014 run used a 5/8-inch plywood skin. The current production runs use 3/4-inch. If you patch a 5/8-inch cassette with a 3/4-inch panel, you will create a 1/8-inch ridge that telegraphs through the roofing membrane within a season. You have to shim or plane the patch to match.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Home Additions & ADU Is Failing

  • Doors that stick at the top corner of the jamb. This is usually the wall panel settling or the corner lock loosening. In Los Angeles, the expansion and contraction from our dry heat to coastal damp cycles works these connections loose over time. The fix is re-squaring the opening and re-torquing or replacing the lock.
  • A hairline crack running diagonally from a window corner. That diagonal path is the panel joint shifting. It is not the drywall cracking on its own; it is the panel behind it moving. The cause is usually a sill anchor that has lost tension.
  • Moisture staining at the ceiling-to-wall seam. This points to the roof cassette-to-wall connection failing at the flashing detail. CGI cassettes drain through a concealed channel, and when the channel clogs or the sealant breaks down, water travels inward before it shows itself.
  • A soft spot on the floor near the exterior wall. Los Angeles gets rain in bursts, and a failed sill gasket lets that water wick under the wall panel. By the time you feel the floor give, the rim joist has been wet for a while.
  • You can see daylight at the bottom corner of an exterior wall. This is the sill plate lifting or the anchor pulling out entirely. It is the most serious of the common failures because it means the structure is no longer bearing the way it was designed to.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installers setting a new window and checking it for level

In Los Angeles, replacement work on a CGI addition or ADU runs $53,100-$153,400 installed. Where you fall in that range depends on how much of the structure has to come apart: a corner lock replacement with re-squaring might sit near the low end, while a full wall panel replacement on an ADU with finish work sits near the top.

The number we give you is written before any work starts, and it stays the number unless you approve a change in writing. Under Clause 1 of the Haven Standard, that is not a courtesy; it is how we have run every job. The price includes parts, labor, debris removal, and a documented photo record of the work on every visit. Your written warranty comes with the written scope.

DIY or Call Us?

You can check the sticker above the entry door to identify your CGI generation, and you can note where cracks are and whether they change with the season. That information helps us price the job faster. What you should not do is open a wall panel and start loosening anchors. These panels carry roof load, and a panel that is unloaded incorrectly can shift on you.

Measure twice, say it once, show your work. That is the whole approach. If you have a CGI addition or ADU acting up, call (470) 298-9650 and we will tell you what we think it is and what it will cost, in writing, before anyone touches the building.

FAQs

A new paver patio with a seat wall and fire pit

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch