A living room with a wall of new windows and a sliding glass door

CGI Windows & Doors Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A new bay window with a cushioned seat
A new casement window over a kitchen sink
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Windows & Doors: The Los Angeles Owner’s Guide

We stock and install CGI-compatible window and door parts across Los Angeles, with most replacements running $470 to $2,125 installed depending on the component. You’ll typically get a written line-item price before we touch anything, and most common part swaps happen the same day we confirm the match. Wins in Los Angeles usually notice the failure two ways: a window that suddenly takes real force to open, or a door that doesn’t sit square in its frame after a few hot summers. The frame looks fine. The hardware isn’t, and that’s the part you’re replacing.

Call (470) 298-9650

Key Takeaways

  • CGI parts are model-specific: a Series 5500 balcony door roller is not the same as a Series 9000 roller, and guessing wrong costs you a second visit.
  • Most CGI failures in Los Angeles are hardware first: rollers, balances, weatherstripping, and locking mechanisms wear before glass or frames do.
  • Written pricing before work starts is Clause 1 of our Haven Standard. No “call for a quote” here.
  • We carry OEM and proven aftermarket equivalents for common CGI lines, and we’ll tell you which one belongs in your opening.

Which CGI Models This Applies To

New double-hung windows in a dining room

CGI’s Sidemount and casement lines, the Series 5500 and 9000 impact-rated windows, and the Estate Collection doors all share a parts ecosystem, but not interchangeably. We see this mistake often in Los Angeles: an owner orders a generic roller or balance based on the glass dimensions and ends up with a part that fits the frame but doesn’t seat correctly in CGI’s track profile. The compatibility gotcha is that CGI mills their tracks to tighter tolerances than most domestic aluminum lines we service, so the part must match the series, not just the opening size.

To identify your model, look at the manufacturer’s sticker on the interior edge of the sash or the top rail of the door panel. It lists the series, the glass package code, and sometimes the original install date. If the sticker is gone, the sash dimensions plus the track width plus a photo of the roller or balance housing is usually enough for us to match it. For OEM parts, CGI distributes through a limited network in Southern California, which means wait times can stretch into weeks. We stock the fast-moving replacements for Series 5500 and 9000 and keep quality aftermarket equivalents for older Estate Collection hardware where OEM has been discontinued. We’ll tell you the difference, because sometimes aftermarket is the better part, and sometimes it isn’t.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Windows & Doors Is Failing

  • The door sounds like it’s dragging gravel when you slide it. The rollers have flat-spotted or the bearings are shot. This is the most common CGI door failure we replace in Los Angeles, and leaving it only scores the track, which turns a roller job into a track job.
  • The window sashes drop an inch or two when you try to leave them open. The block-and-tackle balances inside the side jambs have lost tension. Older CGI balances use a spring-loaded mechanism that fails gradually, and the window will eventually refuse to stay open at all.
  • You can see daylight at the corner of a closed sash. The weatherstripping has compressed or the sash alignment is off. Los Angeles heat accelerates the compression, especially on west-facing openings that take afternoon sun.
  • The handle spins with less resistance than it used to. The locking mechanism’s internal cam is worn or the keeper has slipped. On CGI Estate doors, this usually starts as a delayed lock and ends as a door that won’t lock at all.
  • The window is visibly harder to crank in summer than winter. The operator mechanism is binding, often because the aluminum frame has expanded just enough in the heat to misalign the gears. Los Angeles temperature swings make this more common for CGI casements than the manufacturer’s warranty would suggest.

Replacement Cost & What’s Included

Installers setting a new window and checking it for level

In Los Angeles, CGI window and door parts replacement typically lands between $470 and $2,125 installed, depending on which component you’re replacing and how many openings it involves. A single roller replacement for a patio door runs at the low end. A full hardware set for an Estate door or a pair of balance assemblies for a large casement window lands higher. Glass replacement is separate and priced by the package code on the sticker.

Every quote is a flat written price with a written scope, which means the number we give you is the number you pay unless a change order is signed. We can’t know the exact part cost until we match the model, but the labor on a common hardware swap is predictable, and we tell you parts and labor separately so you can compare the OEM cost against the aftermarket option. The workmanship warranty is in writing and follows the same discipline as the quote: documented, not promised.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

For most CGI hardware, what you can safely do yourself is limited to diagnosis: note which sash or panel is failing, take a photo of the sticker, measure the sash, and send all of it to us. That is genuinely useful and gets the right part ordered the first time. What you should not do yourself is pull the door panel off the track or open a balance housing on a window. A full CGI impact-rated door panel can weigh over 200 pounds, and a balance under tension can release fast enough to break a hand. This is not scare language. It is the reason we send two technicians to every door panel swap in Los Angeles.

If you want the easiest path, call us at (470) 298-9650 with the sticker photo and the symptom. We’ll match the part, price it in writing, and schedule the swap. You don’t have to be the one on the ladder.

FAQs

A remodeled primary bathroom with a soaking tub and walk-in shower

Contact Rowan Construction Group

If you have a CGI window or door that isn’t operating the way it should, call (470) 298-9650 and describe what you’re seeing. We deal in the same brands across our window and door work, including KraftMaid, Cambria, and Silestone lines for the cabinets and counters that join them. Check the sticker, send the photo, and we’ll get you a written price for the part and the labor. Measure twice, say it once, show your work.

Written by Rowan Construction Group, Rowan Construction Group at Rowan Construction Group, serving Los Angeles and nearby areas.

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch