A living room with a wall of new windows and a sliding glass door
CGI · Orlando, FL

CGI Construction in Orlando, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A new front entry door with glass sidelights
A new bay window with a cushioned seat
New architectural shingles with a clean valley
A new white vinyl privacy fence with a double gate
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Construction in Orlando, CA

We provide independent CGI window and cladding service across Orlando, handling everything from single-sash replacements in College Park ranch homes to full impact-envelope installs on I-Drive hospitality projects. What makes our CGI work different here is that we’ve done it on both sides of Orlando’s split market, the theme-park build-out and the aging CBS residential stock, so we know which permits, parts, and tolerances each side demands. Call (470) 298-9650 for a written estimate before any work starts.

Call (470) 298-9650

Why Orlando Residents Choose Us for CGI Service

A new multi-panel patio door opening a kitchen to the patio

Rowan Construction Group has installed and repaired CGI windows and cladding across hundreds of Central Florida homes, from 1970s CBS ranch houses in Pine Hills to new tract builds in Lake Nona. That range matters because CGI’s product lines behave differently depending on the substrate they’re anchored into. A Sentinel casement in a new wood-framed Lake Nona home sits in a window opening built to modern tolerances. The same window in a 1963 Azalea Park CBS house is mounted into concrete block that may have shifted half an inch since Kennedy was president. If the crew doesn’t know which condition they’re looking at, the window gets blamed for a framing problem.

That background is why our technicians document window openings before ordering glass. We measure the rough opening, check for racking, and record the condition of the substrate, then order CGI product that fits what’s actually there. Measure twice, say it once, show your work.

We’re an independent CGI service provider, not a manufacturer-authorized dealer. That independence means we source genuine CGI replacement sashes, glass, and hardware when available, but we’re not obligated to push a particular product line. If an older discontinued CGI model isn’t worth repairing, we’ll tell you and show you the math. We also stand behind every project with the Done Right Promise: if it’s not done right, we make it right, backed by The Haven Standard, not a handshake.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common CGI Construction Problems We Solve in Orlando

  • Failed or hazed insulating glass units (IGUs) in CGI Sentinels. West- and south-facing exposures in Orlando take brutal afternoon UV and heat, and the sealant between the glass panes breaks down faster here than in coastal markets where marine haze diffuses the sun. You’ll notice fogging between the panes or a milky film that won’t wipe off. The fix is a replacement IGU or full sash, and we’ll quote both options in writing.
  • Stripped or corroded stainless steel hinge hardware on casement and awning windows. In older CBS homes, original aluminum frames trapped moisture from afternoon thunderstorms against the hinges. Over decades, that trapped water eats at even stainless hardware. We see this most often in Pine Hills and Conway, where 1960s and 1970s homes still carry original window frames.
  • Misaligned or binding sashes after settling or hurricane-driven racking. 1950s and 1970s concrete block homes in Orlando were not framed with modern window-opening tolerances. When the block settles or a hurricane like Ian pushes the structure hard, the openings twist, and the sashes bind. A binding sash isn’t a window defect, it’s a structural condition, and we treat it that way.
  • Weatherstripping and glazing bead degradation from Orlando humidity. Fixed picture windows in master-planned communities like Horizon West see accelerated weatherstripping breakdown because the humidity never really leaves. Air and water start sneaking past the seal, and you’ll see water staining on the interior sill after heavy afternoon storms. We replace the glazing bead and weatherstripping with OEM-spec materials, not generic extrusions.
  • Corner seal failures on CGI units after hurricane events. When a structure racks during tropical winds, corner seals on impact windows can break even if the glass itself doesn’t crack. The window looks fine from the outside, but condensation starts showing up inside the IGU within a week or two. We pull the sash, confirm the seal failure, and order the correct CGI replacement.

CGI Service in Orlando: What Local Conditions Mean for Your Equipment

The thing nobody tells you about CGI work in Orlando is that the permitting path splits in half depending on which side of the city your project is on. CGI windows are frequently spec’d into Orlando hotels and resort projects along International Drive because Orange County’s tourism-district inspectors enforce stricter windborne debris requirements than the rest of inland Florida. That means the local pros must coordinate with Disney or Universal vendor credentialing systems and pull permits through a separate tourism overlay, a bureaucratic layer that doesn’t exist in Tampa or Jacksonville. The inspectors are thorough, the credentialing process is unforgiving, and the scheduling has to work around park operating hours. The same CGI window installed in College Park goes through a standard Orange County permit. On I-Drive, it goes through a completely different maze. If your contractor hasn’t worked a Tampa CGI service job, they may not realize how much steeper the Orlando tourism overlay is. done hospitality-sector CGI work before, they’ll learn on your dime. We’ve done it. We know which credentialing portal to use, which inspectors to expect, and how to sequence the work so the permits clear before the crew shows up.

CGI Models & Products We Service in Orlando

We service the full CGI residential range: Sentinel Series impact windows, Estate Collection impact windows, Classic Line impact windows, and CGI Commercial/Architectural Series. Our parts sourcing favors genuine CGI replacement sashes, glass, and hardware. Aftermarket aluminum extrusions and impact glazing rarely match CGI’s exact sightlines or structural rating, and we won’t install parts that undercut the window’s wind-load certification. For older discontinued CGI models, we generally recommend replacing the window rather than piecing together salvage parts. Custom-fabricated substitutes carry long lead times and often cost more than a new unit is worth. We’ll show you both numbers in writing before you decide.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

CGI Service Pricing in Orlando

Installers setting a new window and checking it for level

Here’s what CGI service and installation costs in the Orlando market. These are the ranges we quote, and they’re consistent with what Grant has seen across hundreds of Central Florida projects since we started doing CGI work here. Many of those same homeowners also ask us about Orlando driveway and pavers pricing while we’re on-site.

Service Price Range
Impact Window Installation $8,000 - $25,000
Window Replacement $4,500 - $15,000
Roof Replacement & Installation $8,000 - $20,000

What drives the final number is the condition of the existing window opening, the number of units, the CGI model you choose, and whether the permit goes through standard Orange County or the tourism-district overlay. Every quote we write includes a flat price, a written scope, and a written warranty before anyone picks up a tool. Call (470) 298-9650 and we’ll put your number in writing, typically within a day or two.

Serving Orlando, FL - Our Local Coverage Area

We’re serving the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help. We also handle fence installation in Orlando and surrounding neighborhoods.

FAQs - CGI Construction in Orlando

Service Areas Near Orlando

We serve the full Orlando service area, including Azalea Park, College Park, Pine Hills, Conway, Lake Nona, Horizon West, and the I-Drive corridor. For projects further out, we also connect with clients through our CGI service in St. Petersburg and CGI service in Chula Vista operations, and we maintain a dedicated CGI sales & service page for model-specific questions.

Book Your CGI Service in Orlando Today

Need CGI windows inspected, repaired, or replaced in Orlando? Call (470) 298-9650 to schedule a free written estimate. We’ll walk the property, document what we find, and put the price in writing before anyone touches a window.

Written by the team at Rowan Construction Group.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new concrete driveway with a paver borderA stone counter, tile backsplash and open shelf after a kitchen remodelA garage converted into a guest room and home officeA finished backyard cottage with a small covered porchA new roof with clean valleys and new flashingA new stained cedar privacy fence

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Roofing

Shingle, tile and metal roofs over new underlayment and flashing, with new gutters and a full clean-up.

Explore roofing

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Orlando? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate in Orlando

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch