Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Santa Ana, CA | Rowan Construction Group
We provide independent CWS cabinet installation, refacing, and kitchen remodel service across Santa Ana, and the one thing that makes our CWS work here different is the housing stock itself - though we also offer Fence Installation in Santa Ana for full-property projects. Most of Santa Ana’s kitchens sit inside pre-1960 wood-frame bungalows where unpermitted additions, settling foundations, and aging plumbing change how CWS cabinets must be planned, installed, and anchored. That’s the work we know best. If you need CWS service in Santa Ana, call (470) 298-9650 for a free estimate, and we’ll put a written price in your hand before any tools come off the truck.
Why Santa Ana Residents Choose Us for CWS Service
Most of the CWS cabinets we see in Santa Ana were installed decades ago, often by a previous owner, often without plans. Our crews are familiar with those installations because we’ve pulled enough of them apart to know what’s behind the face frames. We understand CWS Classic Series, CWS Shaker, CWS Designer Series, and the CWS Custom Color program, and we know which hinge and glide parts are still available and which lines have been discontinued. Grant Rowan, our owner, trained in construction technology at Los Angeles Trade-Technical College before spending nearly two decades on residential projects across Los Angeles and Orange County, so when a CWS cabinet run shifts out of level on a post-and-pier foundation, the fix starts with the structure, not the shim. We’re an independent contractor, which means we answer to you, not to a manufacturer’s service territory map. More on CWS sales & service and how we approach the brand.
Common CWS Construction Problems We Solve in Santa Ana

- Sagging shelves and loosened face frames from years of wind-driven dust. Santa Ana’s namesake offshore winds push fine particulate through older bungalows that never had modern HVAC filtration. We see CWS cabinet interiors caked with dust that works into hinge barrels and shelf pin holes, and we correct both the hardware and the dust entry points where possible.
- Drawer glide wear and soft-close hinge failure near the coast. In the humid microclimates closer to the Pacific, plus pinhole leaks from aging galvanized supply lines above base cabinets, we find CWS glide bearings corroded and soft-close mechanisms seized. We replace them with genuine CWS components whenever still manufactured.
- Thermofoil door peeling and edge delamination. Many Santa Ana kitchens have range hoods that were never vented to the exterior, so moisture and grease load up inside the cabinet run. CWS thermofoil doors peel at the edges after enough of that cycle. We’ll assess whether a redoor fits or whether the whole run needs replacement.
- Cabinet box separations and corner joint gaps from foundation settlement. In neighborhoods like Logan and Lacy, post-and-pier foundations and expansive clay soils move seasonally. We repeatedly find CWS cabinet boxes pulling apart at glued corner joints as the floor beneath them shifts, and the repair has to address both.
- Doors and drawers binding after unpermitted additions shifted load paths. When a rear addition was built without plans, its framing often bears on walls and floors in ways the original house never anticipated. CWS cabinet runs installed across those transitions bind and twist, and we correct the cabinet line after the framing below it is understood.
Before
AfterCWS Service in Santa Ana: What Local Conditions Mean for Your Equipment
Here’s the local fact that changes everything for CWS work in Santa Ana. Unlike the post-1970 tract homes that fill Irvine, Mission Viejo, and Lake Forest, a huge share of Santa Ana’s residential stock is pre-1960 bungalows that have had decades of unpermitted rear additions, garage conversions, and secondary units stacked onto their original footprints. When you pull a permit for a CWS kitchen remodel in Santa Ana, the City’s Building Division will often require an as-built plan submittal for the entire existing rear addition before they’ll even look at the kitchen scope. That means the cabinet installation you thought would take two weeks may first require documenting a 1980s addition that was never in the city’s records, and that process routinely exposes framing deficiencies, undersized beams, or electrical work that was spliced in without inspection. It also shapes how we install CWS cabinets: we plan cabinet runs around structural realities that only show up in walk-throughs of these older Santa Ana homes, not from a showroom drawing. If you want a contractor who already knows what the Building Division will ask for, see our Santa Ana service area coverage for more examples of local work.
CWS Models & Products We Service in Santa Ana

We work on the full CWS line: Classic Series, Shaker, Designer Series, and Custom Color orders. For hardware, we default to genuine CWS hinges, glides, and touch-up kits whenever available because the sizing and finishes are proprietary and aftermarket substitutes rarely align properly. For discontinued CWS lines where OEM parts are gone, we source like-quality aftermarket components, but we’ll tell you plainly when the face frame or cabinet box wear makes replacement the better money. For faster turnaround on Santa Ana jobs, we keep a stock of common CWS hinge styles, drawer glide replacements, and touch-up kits in our service vehicles, so a hinge-out repair doesn’t wait on a distributor shipment - the same logistics that let us deliver Santa Ana Driveway & Pavers work on schedule. Where a full cabinet run is needed, we order direct through our supplier network and schedule the install around the as-built and permit timeline, not ahead of it.
CWS Service Pricing in Santa Ana
What drives the cost of CWS service in Santa Ana is less about the cabinet line and more about what’s behind the cabinet. Here are the ranges we quote from:
| Service | Typical Range |
|---|---|
| Cabinet Installation & Refacing | $4,000 - $13,000 |
| Small Kitchen Remodel | $9,000 - $20,000 |
| Kitchen Island Installation | $3,000 - $10,000 |
| Countertop Installation | $2,000 - $6,500 |
| Roof Replacement | $8,000 - $20,000 |
| Bathroom Remodel | $9,000 - $28,000 |
Your free estimate includes a written, line-item price and a written scope before any work begins, and no change proceeds without a signed change order. Call (470) 298-9650 and we’ll walk the job in Santa Ana and put the number on paper.
Serving Santa Ana, CA - Our Local Coverage Area

We’re based in the Santa Ana area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CWS Construction in Santa Ana
Because Santa Ana’s housing stock is dominated by pre-1960 bungalows that have accumulated decades of unpermitted rear additions, garage conversions, and secondary units, while Irvine and Mission Viejo were mostly built as master-planned tracts after 1970 with clean permit histories - a difference that also shapes demand for CWS repair in Irvine. The City of Santa Ana Building Division routinely requires as-built documentation for any existing addition before it will issue new permits, which means a CWS kitchen remodel permit often triggers a review of work done decades ago. Call (470) 298-9650 and we’ll tell you what the city will likely ask for on your specific house.
Install can be done, but it’s the wrong order. On a post-and-pier foundation in Santa Ana, the floor moves seasonally with expansive clay soil moisture, so cabinets set on an unlevel or moving floor will pull apart over time. We level the cabinet run with furring and shims anchored to the structure, and we’ll tell you if the floor movement is bad enough that a foundation assessment belongs in front of the cabinet install. For a specific answer, call (470) 298-9650 for a free site visit.
For cabinet interiors, a catalyzed or thermofoil surface survives Santa Ana’s dust and dry heat better than raw or lightly finished wood, but the larger factor is keeping the dust out of the hinge hardware. We recommend solid wood face frames over particleboard, and we verify that cabinet runs are sealed at wall junctions so wind-blown dust isn’t circulating behind the boxes. The right answer depends on your kitchen’s exposure and your existing cabinet line; call (470) 298-9650 and we’ll assess it in person.
We assess the box condition first. If the boxes are sound and the wiring behind them has been properly decommissioned and replaced, reuse is fine. If active knob-and-tube remains behind or above the cabinet run, we will not reface over it; that wiring must be addressed before we put new fronts on. We do not cut corners on electrical safety to save a refacing job. Call (470) 298-9650 and we’ll inspect what’s behind the boxes before quoting.
We start by documenting what’s there, because the city will require as-built plans for that conversion before any new CWS cabinet or kitchen work gets a permit. The install itself can usually proceed once the as-built process is underway, but we coordinate the timeline so you’re not installing cabinets into a space the Building Division may later require you to open up. We’ve handled enough unpermitted Santa Ana conversions to give you a realistic sequence and a realistic schedule. Call (470) 298-9650 to start that conversation.
Service Areas Near Santa Ana

We serve Santa Ana and surrounding Orange County communities, and we’ve handled CWS work in Riverside and Stockton as well. Closer to home, our Santa Ana crews regularly travel to Irvine, Tustin, Garden Grove, Orange, and Anaheim, so the same written-price discipline and CWS experience follows you wherever your project sits.
Book Your CWS Service in Santa Ana Today
If your CWS cabinets are sagging, peeling, or pulling apart in a Santa Ana bungalow, we’ll put a written price in front of you before any work starts. Call (470) 298-9650 to schedule your free estimate. Measure twice, say it once, show your work.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Santa Ana and Orange County since 2007.







Before
After
Before
After