A remodeled primary bathroom with a soaking tub and a walk-in shower

Delta Bathroom Remodeling Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A wood double vanity with two mirrors after a bathroom remodel
A new roof with clean valleys and new flashing
A new multi-panel patio door opening a kitchen to the patio
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
A single-story rear room addition with tall windows and a new patio
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Delta Bathroom Remodeling: The Los Angeles Owner’s Guide

A full Delta bathroom remodel in Los Angeles typically runs $10,620 to $33,040 installed, depending on whether you’re replacing a shower valve cartridge or gutting to the studs. We stock Delta-compatible trim kits, cartridges, valve bodies, and showerheads on hand, and we can usually match your existing Delta series the same day we visit. Most Los Angeles homeowners discover a problem the same way: water temperature that won’t hold steady, a handle that spins without resistance, or a showerhead that’s become a trickle.

Call (470) 298-9650

Which Delta Models This Applies To

A tile setter installing wall tile in a shower

Delta has manufactured bathroom fixtures under several distinct series lines since the 1990s, and the compatibility rules are not interchangeable. The Monitor series (pre-2006), the Monitor 13/14 series, the MultiChoice Universal valve (2006 to present), and the Trinsic, Cassidy, and Linden trim lines all use different cartridges and trim screw spacing. The quickest way to identify what you have is to remove the handle and look for a small printed number on the cartridge stem or the escutcheon plate. If you still have the original packaging or the installation manual, the model number usually starts with a T (for tub/shower), a P (for pressure balance), or an R (for rough-in valve).

One compatibility gotcha specific to Delta: a MultiChoice Universal valve body will accept almost any Delta trim kit made after 2006, but a Monitor 13/14 valve body will not accept a Trinsic trim. We see this mismatch frequently in Los Angeles homes built between 2004 and 2010. On the OEM versus aftermarket question, we install genuine Delta parts for anything that touches water flow or temperature control. The aftermarket cartridges we’ve tested in the field have a higher rate of early failure, and the cost difference on a $60 to $90 cartridge doesn’t justify the risk of a leak behind a tiled wall.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Delta Bathroom Remodeling Is Failing

  • Handle turns but water temperature won’t adjust. This is almost always the pressure-balancing cartridge, which Delta rates for approximately 10 to 15 years in Los Angeles water conditions. Hard water mineral buildup in LA shortens that lifespan to the lower end.
  • Water drips from the tub spout after the shower is off. Usually a worn diverter gate inside the cartridge or the tub spout itself. It’s not a huge repair, but the drip wastes roughly 3,000 gallons a year if ignored.
  • Showerhead pressure has dropped noticeably. Delta showerheads have a flow restrictor that collects sediment. LA water carries enough dissolved minerals that we often see partial clogging within five to seven years, especially in Hancock Park and Silver Lake where older supply lines are still in service.
  • The trim plate is pulling away from the wall. This isn’t always visible until you look closely. It usually means the valve body was never properly braced inside the wall, which is a framing issue we fix during a remodel, not a part issue.
  • Rust or green corrosion on the escutcheon or handle. When the finish shows corrosion, the underlying brass has been exposed. It doesn’t affect function immediately, but it’s a sign the fixture has reached the end of its serviceable finish life.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

New painted shaker cabinets with an organized deep drawer

Here’s the installed price structure for Delta bathroom work in Los Angeles, based on what we’ve quoted and delivered across the city:

  • Delta cartridge replacement (Monitor or MultiChoice): $945 to $2,950, depending on whether we’re accessing the valve through an existing trim opening or opening the wall.
  • Delta trim kit swap (handle, escutcheon, showerhead, tub spout): $945 to $3,540. The spread depends on whether you’re matching an existing series or upgrading to a newer trim line.
  • Full Delta shower replacement (valve body, trim, showerhead, and surround): $3,540 to $10,030.
  • Complete bathroom remodel with Delta fixtures: $10,620 to $33,040.

Every quote includes the written scope before work begins, per Clause 1 of the Haven Standard. You get a line item for the part, the labor, and the finish work. No number appears on the invoice that wasn’t on the estimate you signed. If the wall has to be opened because the valve body needs replacement, we include the tile or fiberglass repair in the quoted number.

DIY or Call Us?

If your Delta fixture has a slow drip from the tub spout or a showerhead with weak flow, you can unscrew the aerator or the tub spout and soak it in vinegar to clear mineral buildup. That’s a five-minute fix that costs nothing. What you should not do is attempt a cartridge replacement without the proper knowledge of the water shutoff location and the right tools for the retaining clip. The cartridge sits inside a valve body that holds back full water pressure, and a partially seated cartridge can leak inside the wall cavity for months before you notice the damage. We’re not going to alarm you about it, but the repair bill for a behind-the-wall leak is a multiple of the cartridge swap cost.

If you want to try the diagnosis yourself, we’ll walk you through what to check on the phone. If you’d rather hand it off, call us at (470) 298-9650 and we’ll send a technician with the likely Delta parts already on hand.

FAQs

A remodeled kitchen with a waterfall island and wood cabinets

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch