A new herringbone paver driveway

Dvele Driveway & Pavers Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A new paver pool deck
A new curved paver walkway to the front porch
An open kitchen and dining area after a remodel
A freestanding soaking tub in a remodeled primary bathroom
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
A new front entry door with glass sidelights
A new black aluminum pool fence with a gate
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Dvele Driveway & Pavers: The Los Angeles Owner’s Guide

If your Dvele home’s driveway or paver hardscape has cracked, settled, or begun to fail, the replacement cost in Los Angeles typically runs $5,900 to $16,520 for a full driveway replacement, while paver repairs on isolated sections usually land between $1,200 and $4,500 depending on the square footage and substrate condition. We stock Dvele-compatible pavers and driveway materials on hand, and the local pros can assess the damage and deliver a written price before any work starts. Most owners discover the problem the same way: a paver that rocks underfoot after rain, a crack that wasn’t there last summer, or a low spot where water pools against the garage slab instead of draining toward the street.

Call (470) 298-9650

Dvele homes were built with a specific approach to hardscape: permeable paver systems, precise drainage planning, and materials chosen for California’s dry-wet cycling. When those systems age or the ground beneath them shifts, the failure is rarely cosmetic. It’s structural, and it follows a predictable pattern we’ve documented across Los Angeles County.

Which Dvele Models This Applies To

A crew setting pavers over a compacted base

Dvele’s Los Angeles build portfolio includes single-family and multi-unit projects where driveway and paver specifications were selected during the original build contract. The paver brand, size, and color were recorded in the homeowner’s finish schedule, but many owners don’t have that document anymore. Here’s what actually matters for matching.

Dvele driveways typically use one of three paver families: a 60mm architectural concrete paver for vehicular areas, a 30mm pedestrian paver for walkways and patios, and in some later builds a permeable paver with wider joint gaps for stormwater absorption. The easiest way to identify what you have is to measure the paver thickness at a chipped edge or an exposed joint. If it reads 60mm or roughly 2 3/8 inches, it’s a driveway-rated paver. If it’s thinner, it was never meant for vehicle loads, and that’s often exactly why it cracked.

We carry direct OEM-equivalent replacements for the common Dvele paver profiles, plus quality aftermarket equivalents from Belgard and Techo-Bloc that match the original dimensions and can be field-blended if the exact color lot is no longer manufactured. For Dvele specifically, our recommendation is usually OEM-equivalent when the paver is still in production, because color matching across brands is where aftermarket swaps go wrong. A half-shade difference looks invisible on a sample board and obvious across a full driveway.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Dvele Driveway & Pavers Is Failing

  • Rocking or shifting pavers. When a paver moves underfoot, the bedding sand beneath it has washed out or compacted unevenly. This is the earliest warning sign, and it means water has found a path under the surface.
  • Low spots that hold water after rain. Dvele homes were engineered for positive drainage, so standing water means the substrate has settled or a drainage channel is blocked. The longer water sits, the faster the base layer erodes.
  • Edge restraint failure. If the paver border along the driveway or walkway has started to spread outward, the plastic or concrete edge restraint has failed. Once the edge goes, the entire field of pavers can drift within months.
  • Cracked or spalled pavers in the wheel path. Vehicle weight concentrated on pavers that were installed over a thin or poorly compacted base will crack them along the tire lines. This is a base problem wearing a paver costume, and replacing only the cracked units won’t fix it.
  • Weed growth through joints that used to be tight. Weeds don’t push pavers apart; they grow in joints that have already widened from movement. If you’re pulling weeds monthly, the paver system is shifting underneath.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled primary bathroom with a soaking tub and walk-in shower

For a full driveway replacement in Los Angeles, expect $5,900 to $16,520 depending on square footage, base depth, paver selection, and whether we’re reusing any existing material. A partial paver repair, where we lift and reinstall a settled section with new bedding sand and edge restraint, typically runs $1,200 to $4,500. Concrete driveway replacement on a Dvele home, when the original was poured concrete rather than pavers, falls between $5,310 and $14,160.

What drives the range: the condition of the base layer (we’ll dig test holes and show you what’s down there before we quote), the paver thickness and brand match, drainage corrections if the original slope was off, and disposal fees for the old material. Every quote includes the parts, labor, base prep, compaction, joint sand, edge restraint, and cleanup in one written number. We don’t start a job until you’ve signed that written scope, and no change to the project proceeds without a signed change order. That’s Clause 1 of the Haven Standard, and it’s why our final invoices have stayed within a few percent of the agreed price on 4,000-plus projects.

DIY or Call Us?

You can safely inspect your Dvele driveway yourself. Walk it after a rain and mark every low spot with chalk. Lift one rocking paver and measure its thickness. Check that the edge restraint is still buried and intact. Take photos. That documentation helps us quote accurately before we arrive.

What you should not do is start pulling pavers and rebuilding the base yourself. A driveway base in Los Angeles is typically 6 to 8 inches of compacted aggregate, and doing this wrong means the same failure again in two years. Pavers are heavy, the work is hard on the back and knees, and the moment you alter the base you’ve taken on liability for drainage, slope, and load-bearing without a written record of what was there. We’ve been called to fix more than a few homeowner paver projects that looked fine for one winter and then shifted. Call us at (470) 298-9650 and we’ll bring the test holes, the measurements, and a written price. Measure twice, say it once, show your work.

FAQs

A single-story rear room addition with tall windows and a new patio

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch