A home with a brand-new roof and gutters at golden hour

ECO Window Systems Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A new clay tile roof
A newly finished roof with a ridge vent and step flashing
A new black aluminum pool fence with a gate
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A new bay window with a cushioned seat
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ECO Window Systems Roofing: The Los Angeles Owner’s Guide

We stock, source, and install ECO Window Systems-compatible roofing components across Los Angeles, with most replacement parts priced between $470 and $2,950 installed. We keep common flashing, sealant, and curb-mounted accessory parts on hand, so a single visit often resolves the issue. You’ll typically notice this problem first as a water stain on the ceiling near a skylight or roof window, or peeling paint around the interior frame, which usually means the roof-to-window seal has failed, not the window unit itself.

Call (470) 298-9650

The good news: in most cases, the ECO Window Systems window itself is fine. What fails is the roofing integration around it, the flashing, the sealant lap, or the curb the unit sits on. That’s why we treat this as a roofing job first and a window job second. You bought an engineered window system. The roof around it needs to be engineered just as carefully.

Which ECO Window Systems Models This Applies To

New architectural shingles with a clean valley

ECO Window Systems manufactures roof windows, skylights, and sloped-glazing units that sit within the roofing plane rather than on top of it. In Los Angeles, we work on fixed skylight units, operable vented roof windows, and tubular daylight devices. The compatibility gotcha: ECO’s curb-mounted units use a proprietary curb profile that standard off-the-shelf flashing kits don’t match cleanly. Measure the curb base at the roof deck. If it’s a 2×4 or 2×6 site-built curb, the flashing kit is more forgiving. If it’s a factory curb with an integrated gasket channel, you need ECO-specific or precisely matched aftermarket flashing, because a generic kit will leave a gap that silicone alone can’t close.

The label on the inside frame of the glazing unit identifies the series and production date. Bring us that photo and we can confirm compatibility before we schedule. For most Los Angeles homes, we recommend OEM flashing when the unit is under ten years old and a quality aftermarket equivalent for older units where the model line has been discontinued. Both options come with a written price before any work starts, per Clause 1 of the Haven Standard. We’re an independent contractor. We aren’t affiliated with ECO Window Systems, which means we can be honest about when aftermarket parts make sense and when they don’t.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ECO Window Systems Roofing Is Failing

  • Water staining on the ceiling or wall below the unit. This is almost always flashing or sealant failure at the roof plane. The window itself rarely leaks through the glazing. Water travels along rafters, so the stain often appears several feet from the window, which throws people off.
  • Daylight visible around the frame from inside the attic. If you can see light between the curb and the roof sheathing, the seal has opened and water is already getting in, or will within one rain event. This is the most definitive sign and the fastest to repair if caught early.
  • Condensation between glazing panes. The sealed unit has lost its argon fill and desiccant is saturated. This is a glazing replacement, not a roofing repair. Two different procedures, one service call.
  • Visible rust or lifted flashing on the exterior, especially on the upslope side. In Los Angeles, sun does more damage than rain. UV breaks down the protective coating on galvanized flashing, then the morning marine layer in the coastal zones does the rest. Uplifted flashing is a roof repair problem, plain and simple.
  • Operable roof window that won’t close or latch completely. This often points to racked curb framing or failed hinges. A window that won’t seat leaves a gap for water entry even if the flashing is intact.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roofers installing a new roof with safety harnesses

Installed replacement parts for ECO Window Systems roofing in Los Angeles run from $470 to $2,950 depending on what has failed. A flashing and sealant replacement on a fixed skylight typically lands between $470 and $1,180. Replacing a damaged curb, whether from dry rot or racking, runs $1,180 to $2,125. A full glazing replacement on larger roof windows can reach $2,950 when the sealed unit is oversized and needs custom scheduling.

Every quote includes the part, the labor to remove and reset the unit if required, all flashing and sealant, disposal, and a documented photo record of what we found and what we did. That photo record is standard on every visit, not an upgrade. The Done Right Promise applies: if it’s not done right, we make it right. You’ll see the written scope and the written warranty before we start. No number moves without a signed change order.

DIY or Call Us?

Some things are safe to check yourself. Go into the attic on a sunny day and look for daylight at the curb-to-sheathing seam. Inspect visible flashing from the ground with binoculars. Take photos of the label on the window frame. Those checks cost you nothing and save us time.

The repair itself is different. Working on a roof plane around a glazing unit means working at height, on a slope, around glass. Getting the sealant lap right requires knowing where water flows on your specific roof pitch and what the underlayment condition is beneath the flashing. One wrong step turns a $700 repair into a $3,000 drywall and insulation job. If you’ve identified the problem, call us at (470) 298-9650 and we’ll send a credentialed tech with the right flashing and sealant on hand.

FAQs

A second-story addition that matches the existing roofline

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch