A living room with a wall of new windows and a sliding glass door

ES Windows Fence Installation Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A new multi-panel patio door opening a kitchen to the patio
New double-hung windows in a dining room
A freestanding soaking tub in a remodeled primary bathroom
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
A new black aluminum pool fence with a gate
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ES Windows Fence Installation: The Los Angeles Owner’s Guide

ES Windows fence installation in Los Angeles typically costs $4,130 to $10,620, with most completed jobs landing between $5,900 and $8,200 for an average residential property line. We stock ES Windows-compatible fence components and can usually begin work within five to seven business days of your written estimate. Most owners discover a failing fence section the hard way: a gate that drags against the concrete, a post leaning after a winter rain, or a windstorm that exposed rot where the fence meets the ES Windows frame rail. By the time you can see the problem, the part underneath has usually been failing for months.

Call (470) 298-9650

At Rowan Construction Group, the local pros replace ES Windows fence lines, posts, gates, and hardware across Los Angeles every month. We’re an independent contractor, not affiliated with ES Windows, but we source their components directly and match their specs exactly. The fences that fail first are almost always the ones installed without accounting for drainage. That’s the part nobody talks about, and it’s the part we check first.

Which ES Windows Models This Applies To

A new casement window over a kitchen sink

ES Windows fence systems are specified for their aluminum and vinyl window frame lines, most commonly the ES9000 series and ES5000 series. The fence components vary by window height and mounting configuration, not just by color. If your fence was installed with ES Windows products, the compatibility point is the post receiver bracket: ES Windows uses a proprietary 2-3/8″ post sleeve with a set-screw channel that differs from generic box-store posts by about 1/16″. That sixteenth of an inch is the difference between a fence that holds square and one that rattles loose in a year.

Here’s the compatibility gotcha we see most often in Los Angeles: homeowners replace a broken picket or rail with a big-box part that measures the right width but the wrong profile depth. ES Windows rails are extruded with a deeper channel than standard residential rails. The aftermarket part fits the opening, but it sits proud of the adjacent rails by a visible margin. It works until it doesn’t. For rail replacements, we recommend OEM ES Windows extrusions. For posts and concrete footings, a quality aftermarket equivalent from a vetted supplier is fine, and honest - the post is doing structural work, not aesthetic work.

To identify your exact part, look for the ES Windows stamp on the inside face of the top rail, near the post. It will show a series number and a manufacture date. Take a photo of that stamp before you call anyone. It tells us whether we can match your fence to the original spec or whether we need to field-measure every section because the original installation drifted.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ES Windows Fence Installation Is Failing

  • Post lean that started after rain. In Los Angeles, most fence posts fail because water pooled at the base and softened the footing. The post itself is often fine, but the concrete is undersized or cracked. We dig down, check the footing diameter, and replace the post and footing together when needed.
  • Gate sag or drag. A gate that scrapes the driveway usually means the hinge post has shifted, not that the hinges bent. ES Windows gates are panel-heavy, and when the post moves even a quarter inch, the latch stops lining up. Forcing the gate shut makes it worse.
  • Rails pulling out of the post brackets. The set-screw channels on ES Windows posts hold the rails under tension. When a rail works its way out, the screw channel has stripped or the post was never shimmed square during the original install. If you can push the rail back in by hand, it will come out again.
  • Concrete spalling around post bases. That flaking, crumbling concrete at the base of a post is water intrusion. Los Angeles sees enough seasonal moisture shift that posts set without a proper drainage layer will spall within five to seven years. The repair means pulling the post, not patching the surface.
  • Fence sections you can move with one hand. A fence should not flex when you push on it. If an ES Windows section moves, at least one post has lost its bearing. That’s a structural fix, not a hardware fix.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installers setting a new window and checking it for level

ES Windows fence installation in Los Angeles runs $4,130 to $10,620 depending on linear footage, post condition, gate hardware, and whether the old footings can be reused. A short run with two gates and good footings sits near the lower end. A full property line with deteriorating posts and one custom gate near the top. Here’s a straightforward breakdown:

  • Post replacement with concrete footing: $180-$310 per post, including digging, setting, and haul-off.
  • Rail and picket replacement (ES Windows spec): $24-$42 per linear foot, materials and labor.
  • Complete fence section rebuild: $45-$68 per linear foot, including all hardware.
  • Custom gate build and hang: $590-$1,180 per gate, depending on width and hardware.

Every Rowan Construction Group quote is a flat written price delivered before any work starts. No change proceeds without a signed change order. That’s the discipline that has kept our projects within a few percent of the agreed cost across more than 4,000 jobs. The workmanship warranty is in writing, and every visit includes a documented photo record of what we found and what we did.

DIY or Call Us?

There are things you can safely check before calling: take a photo of the ES Windows stamp on the inside of the top rail, note which post is leaning and which direction, and test whether any rail moves when you push it. That information saves us a diagnostic trip and gets your written estimate faster.

What you should not do: dig out a leaning concrete footing and reset it yourself. A post under fence tension that releases while you’re working is a broken-finger event at best. Same goes for cutting and re-hanging a gate. We carry the right shims, the right screw size, and a template for the ES Windows bracket spacing. If you want to see what we find before you commit, call (470) 298-9650 and ask for a written estimate. We’ll put the number on paper, with the scope, before we touch anything.

FAQs

New painted shaker cabinets with an organized deep drawer

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch