A living room with a wall of new windows and a sliding glass door

ES Windows Windows & Doors Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
New double-hung windows in a dining room
A new front entry door with glass sidelights
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new stained cedar privacy fence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ES Windows Windows & Doors: The Los Angeles Owner’s Guide

If you have an ES Windows window or door that’s failing, we stock ES Windows-compatible replacement parts and install them throughout Los Angeles. A typical hardware or seal replacement on an ES Windows unit runs $470-$2,125 installed, and a full ES Windows window replacement runs $5,310-$17,700 depending on size and finish. Most owners notice the problem the same way: the sash doesn’t close flush anymore, the handle spins without catching, or there’s condensation between the glass that won’t wipe away.

Call (470) 298-9650

We’re an independent Los Angeles contractor, not affiliated with ES Windows. What that means in practice: we work on ES Windows units every month, we know which parts fail first on their hinged and sliding systems, and we write a flat price before any work starts. No “call for a quote.” The number comes to you in writing, line by line.

Which ES Windows Models This Applies To

A new bay window with a cushioned seat

ES Windows builds aluminum-framed windows and doors in a few distinct lines, and the parts are not interchangeable across all of them. The folding door hardware from their bi-fold systems does not swap into their sliding door track assemblies, and the pivot hinges on their casement and awning windows are sized differently than what you’d find on a generic aftermarket hinge. If you can read the product label, do it: ES Windows etches or stickers a model code on the frame edge, usually on the hinge side or the bottom rail, and that code is what we use to match the replacement part exactly.

The OEM-versus-aftermarket decision matters with ES Windows. For rollers, keepers, and weatherstripping, quality aftermarket parts from manufacturers like Amesbury or Truth match the spec and cost 30-50% less than OEM. For locking mechanisms and multi-point lock gear, we recommend OEM. ES Windows uses a specific multi-point lock profile on their larger doors, and an aftermarket gear set that’s a millimeter off will bind within a season. In Los Angeles, salt air near the coast and hard water inland both eat at aluminum hardware faster than ES Windows’ warranty period anticipates, so we see a lot of replacement work on units that are only 8-12 years old.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ES Windows Windows & Doors Is Failing

  • The handle turns but the lock doesn’t engage. This is almost always a stripped gear inside the lock body or a bent keep on the frame. It means the door or window is no longer sealing, and on an exterior door it also means it’s not actually locked.
  • The sash scrapes or binds when you open it. Aluminum frames in Los Angeles expand and contract with the daily temperature swing. When a roller or hinge wears out, the sash drops a few millimeters and drags on the track or frame. Continuing to force it chews up the weatherstripping and the track itself.
  • Condensation between the glass panes. The insulated glass unit has lost its seal. The gas between the panes is gone, and what you’re seeing is moisture that got in. The fix is an IGU replacement, not a wipe-down.
  • The door won’t stay in the closed position or drifts open. On a sliding door, the rollers have likely flattened. On a hinged door, the closer or the hinge knuckles are worn. Either way, the weight of the panel is no longer being carried correctly.
  • You can see daylight or feel a draft at the frame edge. Weatherstripping on ES Windows units is a compression gasket, and once it takes a set (usually 6-10 years in Los Angeles sun exposure), it stops rebounding. The frame is fine. The gasket is done.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installers setting a new window and checking it for level

Hardware and seal replacements on ES Windows windows and doors in Los Angeles run $470-$2,125 installed. That covers the part, the labor to remove the old hardware without damaging the frame, realignment of the sash or door panel, and a written warranty on our work. Where you land in that range depends on whether it’s a single roller swap or a full multi-point lock and hinge set on a tall door.

Full ES Windows window replacement starts at $5,310 and runs to $17,700 for larger custom sizes or upgraded glass packages. We write every quote as a line-item price with the part numbers listed, so you can see exactly what you’re paying for. If you bring us a competitor’s written estimate, we’ll review it line by line at no charge. That’s standard for us, not a promotion.

DIY or Call Us?

You can safely do two things yourself: read the model code off the frame edge and take photos of the failed part from two angles. That’s genuinely useful and helps us bring the right part on the first trip. Beyond that, ES Windows hardware replacement gets risky fast. The doors are heavy – a typical ES Windows sliding panel is 120-180 pounds – and removing a roller or hinge without supporting the panel can drop it on you or damage the glass. Multi-point locks are under tension, and the lock rods inside the door stile are not something to fish out with pliers. If the part involves springs, high-tension hardware, or lifting a full door panel off its track, call a professional. We’re at (470) 298-9650, and we’ll tell you over the phone whether it’s a truck-stock part or a special order.

FAQs

An open kitchen and dining area after a remodel

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch