Jerith Construction in Plano, TX

Jerith Construction in Plano, CA | Rowan Construction Group

We provide independent Jerith fence installation and repair across Plano, and the reason our work here holds up is simple: we pull original slab drawings before we ever dig. That’s not a marketing line. It’s a routine step on Plano’s 1980s-era post-tension slabs, where a saw-cut or auger in the wrong spot can sever a live tendon and turn a fence post into a five-figure structural repair. Rowan Construction Group has worked on Jerith sales & service across Plano for over a decade, and we quote every job with a written price before a single post comes out of the ground. Call (470) 298-9650 for a free estimate.

Call (470) 298-9650

Why Plano Residents Choose Us for Jerith Service

Grant Rowan, our owner, trained in construction technology at Los Angeles Trade-Technical College, where the coursework covered concrete before it ever covered curb appeal. That matters in Plano, because Jerith fence work here is rarely just fence work. It’s foundation work. It’s drainage work. It’s knowing that the Blackland Prairie clay under your 1980s home swells and shrinks enough to shove a fence post out of plumb within two seasons. We’ve repaired and installed Jerith Pro Series, Estate Series, and Industrial Series fencing across Plano’s master-planned subdivisions long enough to know which failure is a fence problem and which is a soil problem, and we quote accordingly - the same approach we bring to Jerith service in Garland. Under Clause 1 of The Haven Standard, you get a flat written price before we start. That’s the whole point.

Common Jerith Construction Problems We Solve in Plano

• Post lean from expansive clay. Plano’s Blackland Prairie soil shrinks during drought and swells after rain. That movement racks shallow-set Jerith posts outward, especially near slab edges. We re-foot with helical piers rather than replacing the whole run.
• Gate sag and latch misalignment. North Texas moisture cycles make concrete footings heave and settle through the year. Your Jerith gate drags in August and won’t latch in March. We re-set the gate frame on pier footings and rebuild hardware with genuine Jerith hinges.
• Powder-coat chalking and corrosion on steel Industrial Series. Near Legacy Business Park, de-icing runoff carries salts that eat through steel Jerith fencing faster than anywhere else in Plano. We strip, treat, and recoat before corrosion reaches the post core.
• Wind load failure on Pro Series panels. When original installers used undersized post wall thickness or shallow embedment, tall Pro Series panels rack under spring storm winds. We replace posts with heavier-gauge Jerith stock and set them below the clay’s active zone.
• Fence-to-driveway transitions that crack concrete. Setting a Jerith gate post into a post-tension driveway without checking slab drawings is how people hit tendons. We check the drawings every time, then adjust post placement or use deeper pier footings to avoid the cable grid.

Before

After

Jerith Service in Plano: What Local Conditions Mean for Your Equipment

Plano’s 1980s-era homes were poured with unbonded post-tension slabs, a Collin County cost-cutting standard that saved builders money and created a specific hazard for fence contractors. The steel tendons inside those slabs run in a grid, but the grid is rarely where a contractor assumes it is. Any Jerith fence post set within three feet of a foundation edge requires pulling original slab drawings from Plano’s building department before digging, because coring into a live tendon can snap cable under tension and crack the slab along the entire stress path. Most Dallas and Denton crews don’t run this check because most of their markets aren’t sitting on this slab type, unlike our Jerith repair in Dallas. We do it as standard on every Jerith installation. In one case on Smokerise Drive, we replaced a 200-foot Jerith Estate Series aluminum fence where the gate dragged and posts tilted outward. Our crew pulled the 1987 slab drawings and found three unbonded tendons running within 18 inches of the planned post line. We shifted post locations two inches, used helical pier footings to manage the clay heave, and rebuilt the gate frame with genuine Jerith hinges and corner brackets. Full swing restored, no tendon touched.

Jerith Models & Products We Service in Plano

We work on Pro Series Aluminum Fencing, Estate Series Aluminum Fencing, Industrial Series Aluminum Fencing, and Steel Commercial Series Fencing. For parts, we use genuine Jerith pickets, rails, posts, and gate hardware whenever the manufacturer or regional distributors have them in stock. For discontinued aluminum die-cast fittings, we source precision-machined 6061-T6 aftermarket equivalents from Dallas metal suppliers or our Jerith service in Irving network rather than forcing mismatched parts. Replacement is a last resort. We re-foot leaning posts with helical piers before we quote a full section replacement, and we’ll tell you which is warranted and what it costs, in writing, before any work begins.

Jerith Service Pricing in Plano

FAQs - Jerith Construction in Plano

Why do Jerith aluminum fence posts lean in Plano clay, and can you fix without replacing the whole fence?
Post lean comes from expansive clay movement: the top several feet of Plano’s Blackland Prairie soil expands when wet and shrinks when dry, and shallow-set footings ride the movement like a hinge. Yes, we fix it without replacing the whole fence; we re-foot the affected posts with helical piers set below the active soil zone, then re-set the rails and gate hardware. Call (470) 298-9650 for an exact quote; estimates are free and written.

I have a 1980s Plano home with a Jerith Pro Series fence. Do I need to worry about my post-tension slab before adding a gate post?
Yes, definitely. Unbonded post-tension tendons in 1980s Plano slabs run through the concrete under high tension, and the pattern isn’t predictable from the surface. Before any post is set within three feet of the slab, we pull the original drawings from Plano’s building department and adjust. Skipping that step can mean hitting a tendon and cracking the slab. Call us before you dig; we’ll check the drawings as part of a free estimate.

My Jerith Industrial Series steel fence is rusting near Legacy Business Park. Can you restore it?
Usually yes. The corrosion agent there is de-icing runoff salt from nearby commercial lots and road surfaces, which sits on steel and eats into the powder coat. We strip the affected sections, treat the surface for corrosion, and recoat with a coating matched to the original finish. If the post core is thin from corrosion, we’ll say so and price replacement honestly. Call (470) 298-9650 for an evaluation.

Does Rowan Construction Group use genuine Jerith parts or generic aluminum?
We use genuine Jerith pickets, rails, posts, and gate hardware whenever the manufacturer or regional distributor can supply them. For discontinued die-cast fittings, we source precision-machined 6061-T6 aftermarket parts from Dallas metal suppliers and tell you exactly which part is which on the written quote. We never substitute generic fence section stock for a Jerith run.

Can you install a Jerith gate on my existing concrete driveway without cracking the slab?
We can, if we know where the tendons are. We pull the original slab drawings before any saw-cutting or post-setting on your driveway, and we adjust post locations to avoid the cable grid. It takes one extra hour at the front end and saves you from a cracked post-tension slab. Call (470) 298-9650 to schedule the check and a free written estimate.

Service Areas Near Plano

We serve Plano and surrounding North Texas cities including Dallas, Richardson, Allen, Frisco, and McKinney. For fencing work in other regions, see Jerith service in Orlando and Jerith service in Chula Vista. Our full Plano service area page lists all neighborhoods we cover.

Book Your Jerith Service in Plano Today

Call (470) 298-9650 for a free written estimate on Jerith fence repair or installation in Plano. Measure twice, say it once, show your work. That’s how we quote, and that’s how we build.

Written by Grant Rowan, Owner at Rowan Construction Group, serving Plano since 2007.