Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterWhy Los Angeles Homeowners Choose KraftMaid Construction
We’re an independent KraftMaid construction service provider offering Kraftmaid repair in Los Angeles, and we’ve installed, reinforced, and refaced KraftMaid cabinetry in hundreds of LA homes since 2007. What sets our KraftMaid work apart is that we understand how these cabinets actually behave in this city: the seismic racking that pulls wall cabinets off studs, the marine layer humidity that swells particleboard, and the specific failure points on Vantage, Benton, Duraform, and Hudson lines. Rowan Construction Group is not affiliated with or authorized by KraftMaid, and we don’t pretend otherwise. We service their products with the same written-price discipline we bring to every trade: a flat quote before work starts, signed change orders, and a documented photo record on every visit.
Call (470) 298-9650 for a written KraftMaid service estimate in Los Angeles. No call-for-quote games. You get a number in writing.
Why Trust Rowan Construction Group for Your KraftMaid Construction?
Grant Rowan grew up in the Crenshaw district and trained in construction technology at Los Angeles Trade-Technical College, where coursework covered framing, concrete, and project estimating before he ever took a paying job. He has spent nearly two decades on residential and light commercial projects across Los Angeles County, and the calls he gets most often are for structural remodels: load paths recalculated, shear walls added, cabinets rehung so they stay on the wall when the ground moves. That background matters for KraftMaid work because cabinet installation in Los Angeles is never just cabinet installation. It’s anchoring into studs and blocking, not drywall. It’s understanding where moisture comes from in a 1920s Silver Lake bungalow versus a 1970s Valley tract house. It’s knowing the difference between a cabinet that’s square and a cabinet that’s been quietly failing for years.
Our crews have reworked and installed KraftMaid kitchen and bath cabinetry in hundreds of Los Angeles homes over the past decade, from 1950s stucco bungalows to new hillside remodels. That’s given us an independent understanding of how KraftMaid boxes, hinges, and finishes perform in local humidity and seismic conditions. We know which failure modes show up on which lines. We know what a factory hinge does after five years of daily use in a busy kitchen. And we know when a repair makes sense and when replacement is the honest answer. Every estimate comes as a written, line-item price before any tool leaves the truck, under Clause 1 of the Haven Standard. Every change gets a signed change order. Under the 365-Day Done Right Promise, if it’s not done right, we make it right.
Common KraftMaid Construction Problems We Fix in Los Angeles
- Hinge screws stripping out of particleboard side panels (Vantage and Benton wall cabinets). KraftMaid’s Vantage and Benton wall cabinets use particleboard side panels, and hinge screws work loose over time, especially in kitchens near laundry rooms or dishwashers where humidity cycles are constant. The fix isn’t a longer screw into the same hole. We reinforce the panel, redrill clean, and set the hinge properly. In LA’s older homes, you’ll see this on cabinets original to a 1980s or 1990s remodel.
- Drawer glide brackets bending or detaching under heavy cookware loads (Duraform base cabinets). Duraform base cabinets hold real weight, and the factory glide brackets can bend or pull free when drawers are loaded with cast iron and stacked pots. We see this in Los Angeles kitchens where storage space is tight and drawers do double duty. We swap in full-extension aftermarket brackets rated for far heavier loads than factory spec.
- Thermofoil door and drawer fronts peeling along bottom edges (bathroom vanities with poor ventilation). KraftMaid thermofoil fronts fail from the bottom up when bathroom humidity has nowhere to go, which describes a lot of Los Angeles bathrooms built before code required mechanical ventilation. The peeling starts at the bottom edge, then spreads. Refacing or replacing those doors stops the failure; painting over it doesn’t.
- Seismic racking pulling corner wall cabinets away from studs (any KraftMaid wall cabinet installed with drywall anchors only). Los Angeles is the only major US city with a mandatory soft-story retrofit ordinance, and every pre-1980 structure here carries seismic risk. Wall cabinets that were hung with drywall anchors instead of being screwed into studs and blocking will rack and pull away. We open the wall, add blocking, and rehang properly.
- Water-damaged particleboard side panels from slow drain leaks (KraftMaid peninsula and island base cabinets). A slow leak under a Los Angeles kitchen sink can go unnoticed for months, and by the time you see it, the particleboard side panel on a hidden corner base or peninsula cabinet has swollen and split. We sister a plywood panel into the box, replace damaged glides, and rehang the doors. On a 2015 Vantage peninsula in Los Angeles, that exact repair saved the client about $3,000 versus replacing the entire cabinet run.
BeforeAfterKraftMaid Parts & Our Repair-vs-Replace Approach
We use genuine KraftMaid hinges, drawer glides, and touch-up kits when a client wants an exact factory match. For seismic bracing, box reinforcement, and refacing, we source commercial-grade aftermarket brackets, cabinet-grade plywood, and veneers that outperform the factory particleboard. That’s not a knock on KraftMaid; it’s the reality of Los Angeles conditions, where earthquake bracing and moisture resistance are code-level concerns the factory never had to design for. Every estimate includes a written line-item breakdown of which parts are OEM and which are aftermarket, and why.
Our repair-vs-replace rule is simple. If the box is square and the side panels are solid, we repair. If the particleboard has swollen, split, or the corner joinery has failed, full cabinet replacement is usually cheaper than piecemeal fixes and will last longer. A quick phone call to (470) 298-9650 gets you a written price either way.
Our KraftMaid Service Process - Step by Step
- 1
Diagnosis and written estimate. We open the cabinet, check the box for square, look for water staining at the seams, test every hinge and glide, and check how the cabinet is anchored to the wall. Then we hand you a written, line-item price. Under Clause 1 of the Haven Standard, the price is written before anyone starts.
- 2
Repair or install. We reinforce the box if needed, replace damaged OEM parts with factory or better-spec aftermarket components, rehang doors with proper screws into studs and blocking, and shim for level. Every step follows the written scope. If anything changes, you sign a change order before we proceed.
- 3
Test and adjust. Every door opens and closes softly, every drawer slides full-extension without binding, every wall cabinet is anchored to structure, not drywall. We don’t leave a cabinet that works “mostly fine.”
- 4
Documentation and warranty. You get a photo record of what we found and what we did, plus a written workmanship warranty. The 365-Day Done Right Promise is printed on the page, not an asterisk. If it’s not done right, we make it right.
KraftMaid Products We Service & Install in Los Angeles
We service and install the KraftMaid lines most common in Los Angeles kitchens and bathrooms: Vantage, Benton, Duraform, and Hudson. That covers full kitchen cabinet installation, partial kitchen remodels, cabinet refacing, kitchen island installation, and bathroom vanity work. We stock soft-close hinge replacements, full-extension drawer glide brackets, touch-up kits, and cabinet-grade plywood for box reinforcement in our local inventory, so common Los Angeles repairs don’t wait on a parts shipment from Ohio. Call (470) 298-9650 and tell us your cabinet line. We’ll tell you what we can do and what it costs, in writing, before you commit to anything.
We Also Service These Brands
KraftMaid is our most requested cabinet line, but it’s not the only one. We service and install Cambria and Silestone countertops, Kohler and Toto bath fixtures, and a range of other vetted brands across our seven trades. Fifty-plus material brands means honest line-item pricing, not inflated numbers.
FAQs - KraftMaid Construction Service in Los Angeles
Yes, if the boxes are square and the side panels are solid. Refacing replaces the door and drawer fronts plus veneer on the exposed cabinet sides, and it typically costs less than half of a full replacement. But if the particleboard has swelled from moisture or the corner joinery has failed, refacing is money wasted. Call (470) 298-9650 and we’ll tell you which category your cabinets fall into, with a written price.
The hinge screws have stripped out of the particleboard side panel. It’s the most common Benton failure in Los Angeles homes, especially kitchens with high humidity cycles. Replacing the hinge doesn’t fix a stripped hole. We reinforce the panel, re-drill, and rehang with longer screws into the reinforced frame. We can also swap in aftermarket hinges that last longer than factory spec.
Yes. Los Angeles is the only major US city with a mandatory soft-story retrofit ordinance, and wall cabinets hung with drywall anchors instead of structural anchoring are a genuine safety risk in a seismic event. We add blocking between studs, anchor every cabinet into structure, and make sure corner wall cabinets have proper seismic bracing. This is standard practice on every KraftMaid wall cabinet job we take in Los Angeles.
Generally yes, we can order a matching Duraform drawer front through KraftMaid’s replacement parts channels, or we can refinish with a matched stain and topcoat if the original finish is discontinued. Exact match isn’t always possible on older finishes that have aged in Los Angeles sunlight, so we’ll show you samples before ordering. Call (470) 298-9650 and we’ll give you a written price for a single drawer front replacement.
Thermofoil peels when moisture gets under the foil layer, and that happens most often in Los Angeles bathrooms that lack proper mechanical ventilation. The bottom edges go first. Once peeling starts, the door or drawer front needs refacing or replacement; painting over it makes the problem worse. We’d also check your exhaust fan and make sure it’s venting outside, not into the attic.
Cabinet installation runs $4,720-$15,340, kitchen island installation runs $3,540-$11,800, and a small or partial kitchen remodel runs $10,620-$23,600. Your exact number depends on scope, line, and what we find when we open the cabinets. Call (470) 298-9650 for an exact written quote; estimates are free.
Book Your KraftMaid Service in Los Angeles, CA
Tell us what’s failing and what line you have: Vantage, Benton, Duraform, or Hudson. We’ll send a background-checked, uniformed crew with a written price in hand. Call (470) 298-9650 to schedule your free KraftMaid service estimate in Los Angeles.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Los Angeles since 2007.