A new rear addition with a vaulted beamed ceiling and tall windows

Mighty Buildings Home Additions & ADU Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A finished backyard cottage with a small covered porch
A single-story rear room addition with tall windows and a new patio
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A standing-seam metal roof over a covered porch
A new bay window with a cushioned seat
A new wood side gate with black hardware
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mighty Buildings Home Additions & ADU: The Los Angeles Owner’s Guide

We install and service Mighty Buildings home additions and ADUs across Los Angeles, with installed project costs typically running $53,100-$153,400 for an addition and $106,200-$259,600 for a full ADU. Most owners call us when they hit a compatibility snag, a failed panel seal, or a structural connection that was never quite right from the original install. The good news: nearly every Mighty Buildings issue we see is repairable on site, and we carry the common replacement components on hand.

Call (470) 298-9650

Rowan Construction Group is an independent contractor, not affiliated with Mighty Buildings. That independence matters in one specific way: when a factory part is discontinued or backordered, we are not locked into a single supply path. We source what works, document what we used, and stand behind it under the Done Right Promise.

Which Mighty Buildings Models This Applies To

A garage converted into a guest room and home office

Mighty Buildings produces factory-fabricated wall panels, roof shells, and volumetric modules built around a proprietary light-stone composite and steel frame system. In practice, the homes and ADUs we encounter in Los Angeles fall into three buckets: the single-story Mighty ADU line, the two-story Mighty House series, and custom panelized additions where a local architect spec’d Mighty panels into an otherwise conventional build. Each has slightly different connection details, so the first thing we do on any call is pull the panel labels.

Every Mighty panel carries a stamped or engraved ID near the lower interior corner, usually a letter-number sequence indicating the panel type, pour batch, and revision. That identifier is the honest way to match a replacement panel or seal kit, because a rev-2 panel does not always share the same edge profile as a rev-1 even on the same floor plan. If you cannot find the label, send us a photo of the seam and the surrounding framing, and we can usually identify the generation by the finish detail. For aftermarket components like weather seals, through-bolts, and corner flashings, we use brands we already trust from our other trades: GAF and Owens Corning for roofing transitions, plus Cambria and Silestone scraps for interior finishes that need matching. KraftMaid cabinet pulls and hinge hardware round out the kitchen-side trim when a panel moves enough to throw a cabinet line off.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mighty Buildings Home Additions & ADU Is Failing

  • Visible seam separation at panel joints. Los Angeles thermal swings, especially in the San Fernando Valley and Inland-adjacent stretches, expand and contract the composite panels enough to open hairline gaps if the original sealant was applied too thin. This shows up as a dark line along interior corners or a whisper of daylight at exterior seams.
  • Draft or temperature shift along one wall. The panel-to-foundation transition is where we see most air infiltration. A failed sill gasket or an improperly shimmed base track lets air move, and the wall feels colder than its neighbors on a winter morning.
  • Water staining or efflorescence at panel bases. White chalky residue is mineral salts wicking through the composite face, which means water is getting behind the panel skin. In coastal Los Angeles humidity plus winter rain, a failed weep path shows up within a season.
  • Sticking doors or windows in the addition. Mighty panels are rigid; when one settles even a quarter-inch over a sloped Los Angeles hillside, the rough openings move with it. A door that latched fine in July and binds in December is a structural flag, not a weather issue.
  • Crunching or popping sounds when walking inside. Floor module connections can loosen at the cam locks, particularly after the small but real seismic events Los Angeles gets every few months. The sound is the panel shifting against its fastener under load.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A framer checking new wall framing on a home addition

A full Mighty Buildings home addition in Los Angeles runs $53,100-$153,400 installed, while a complete ADU lands at $106,200-$259,600. Those are the numbers we write before anyone picks up a tool, and they include the panel replacement, structural connection work, weather sealing, finish matching, and the documented photo record of every visit.

What drives the spread: the panel generation, whether we are replacing one wall section or reworking the load path, your location within Los Angeles County (hill sites with tricky access cost more to serve than a flat Mid-City lot), and whether the original install left usable subfloor and footing work we can keep. A minor seal replacement on a single panel seam might cost under $1,000; a structural correction to a hillside ADU base track is at the higher end. Under Clause 1 of The Haven Standard, you get a written flat price and written scope before work starts. No change proceeds without a signed change order. That is the discipline that has kept our projects within a few percent of the agreed cost across 4,000-plus jobs.

Every Mighty Buildings repair we make carries the Done Right Promise: if it is not done right, we make it right. That promise is printed on the page, backed by a terms document, and it applies to parts and labor alike.

DIY or Call Us?

You can safely do three things: photograph the panel labels so you have the generation on record, measure the gap at any visible seam with a feeler gauge or a thin coin, and check that your downspouts are not dumping water directly at the panel base. Those observations help us quote accurately over the phone.

What you should not do is attempt to re-glue, re-bolt, or re-secure a Mighty panel yourself. The panels carry structural load, and a homeowner with a caulk gun cannot restore a failed structural connection, no matter the YouTube confidence. Misapplied adhesive on a load-bearing seam can mask the failure while it worsens underneath. The replacement also involves working at height on additions and ADUs, which carries fall risk. That is a trained professional’s job, full stop. Call (470) 298-9650 and we will have someone look at it. The estimate is free, written, and specific to your panel generation, not a generic number.

FAQs

An open kitchen and dining area after a remodel

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch