A living room with a wall of new windows and a sliding glass door

Mr-Glass Driveway & Pavers Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A new casement window over a kitchen sink
A new multi-panel patio door opening a kitchen to the patio
A garage converted into a guest room and home office
New architectural shingles with a clean valley
A new white vinyl privacy fence with a double gate
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled kitchen with a waterfall island and wood cabinets
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mr-Glass Driveway & Pavers: The Los Angeles Owner’s Guide

We stock and install Mr-Glass-compatible driveway and paver components across Los Angeles, with typical installed replacement work running $8260-$21240 depending on the size of the paver field, substrate condition, and edge restraint system. Most owners discover a failing Mr-Glass paver installation the same way: a wobble underfoot, a low spot that holds water after rain, or a paver that has cracked clean through along a hairline fissure. The part that fails is rarely the paver itself. It’s the base layer beneath it, the sand joint between units, or the edge restraint that had one job and let go.

Call (470) 298-9650

Rowan Construction Group is an independent contractor and is not affiliated with Mr-Glass. What we know about Mr-Glass pavers comes from taking apart thousands of square feet of them in Los Angeles driveways, patios, and walkways.

Which Mr-Glass Models This Applies To

New double-hung windows in a dining room

Mr-Glass driveway and paver systems fall into three broad families: standard segmental concrete pavers, permeable pavers designed for stormwater infiltration, and decorative glass-embedded pavers used for accent bands and pool decks. Each uses a different base specification, and mixing them on one driveway creates exactly the kind of failure pattern we see on Los Angeles hillsides in January: differential settlement where the permeable section drains and the standard section does not. If you’re matching a repair to an existing field, pull one full paver and bring it to our yard, or check the underside. Mr-Glass standard pavers carry a two-letter plant code and a 60mm or 80mm thickness stamp. Permeable units have visible spacer bars cast into the sidewall. Glass-embedded decorative pavers are 40mm and are not rated for vehicular load, which we have to say out loud because someone in Los Angeles has them in a driveway right now.

The OEM-versus-aftermarket decision matters more for pattern-matched accents than for base repair. We specify OEM Mr-Glass when the replacement has to disappear into an existing color blend. For structural base repair below the surface, a quality aftermarket aggregate and geotextile from our standard suppliers performs identically at a lower cost, and we will write that line item either way on your quote.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Mr-Glass Driveway & Pavers Is Failing

  • Pooling water that doesn’t drain within an hour. This means the base under the pavers has settled or the sand joints have washed out, so water has nowhere to go. In Los Angeles, the freeze-thaw excuse doesn’t apply; it’s almost always compaction failure or a clogged permeable layer.
  • Rocking or shifting pavers underfoot. The sand bedding layer has thinned or migrated. It’s a sign the edge restraint has failed, because that’s what holds the entire matrix in tension.
  • Cracks running across multiple pavers in a line. This is a substrate problem, not a paver problem. A crack that propagates in a straight line means the concrete or aggregate base beneath has moved, and the pavers are just following it.
  • Sand or grit washing onto the street after rain. The joint sand is eroding. Left alone, the pavers begin to creep, then the field opens up, then you’re replacing sections rather than re-sanding.
  • Edge pavers separating from the driveway border. The edge restraint has pulled away from the soil, usually because the original installer staked it rather than setting it in concrete. Los Angeles clay soil expands and contracts enough to pop a staked restraint in one wet season.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installers setting a new window and checking it for level

In Los Angeles, expect to pay $8260-$21240 for a full Mr-Glass paver driveway replacement, installed. Partial repair of a failing section runs lower, but the number depends on what we find when we pull the affected pavers. The range is driven by paver type, total square footage, base depth, and access. A 400-square-foot driveway with standard 60mm pavers and a 6-inch aggregate base sits at the lower end. A larger field with permeable pavers, a deeper sub-base, and glass-embedded accents lands higher.

Every Rowan quote includes the parts, the labor, the base material, the sand, the edge restraint, and the haul-off of the failed material. The price is written before we start, and under Clause 1 of the Haven Standard, no change happens without your signature on a change order. You receive a documented photo record of the substrate condition before new material goes in, and the work carries our Done Right Promise: if it is not done right, we make it right.

DIY or Call Us?

You can inspect the field yourself. Walk it barefoot in the evening and feel for movement. Spray it with a hose and watch where water pools. Check the edges for separation. What you should not do is pull pavers and start re-compacting a base without a plate compactor and a proper geotextile. Paver work looks simple because the finished product is flat. The work that keeps it flat is invisible, and that’s where Los Angeles DIY paver repairs go wrong, especially on any slope. We also have to be direct: this is not a dangerous part in the way a garage door spring is. You will not be injured by a paver. You will, however, void the look of your driveway, and you will pay more for us to undo the repair than the original repair would have cost. Call (470) 298-9650 if you’d rather have a written price than a weekend project.

FAQs

A finished backyard cottage with a small covered porch

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch