Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterMr-Glass Construction in Irving, CA | Rowan Construction Group
We provide independent Mr-Glass window and door service across Irving, from 1950s ranch homes near Story Road to the commercial storefronts of Las Colinas, and we also offer our Fence Installation in Irving. Our crews have rebuilt Mr-Glass packages on hundreds of Irving structures over the years, and the one factor that separates our work here from anywhere else is simple: Blackland Prairie clay moves the ground, the ground moves your slab, and the slab moves your frames. Call (470) 298-9650 for a free estimate on any Mr-Glass repair or replacement.
Why Irving Residents Choose Us for Mr-Glass Service
Mr-Glass windows and doors show up all over Irving’s housing stock. North Irving ranches from the 1950s and 1960s wear Mr-Glass Classic 1000 units with original aluminum frames. Valley Ranch townhomes and patio homes lean on StormGuard 3000 and Insulated 5000 series for wide glazing. Las Colinas office towers carry Mr-Glass Commercial 7000 storefront systems that have been baking in the prairie sun since the 1980s.
We know these product lines because we have taken them apart, re-glazed them, re-flashed them, and put them back on hundreds of buildings. Grant Rowan, our owner, trained in construction technology at Los Angeles Trade-Technical College before spending two decades on residential and light commercial projects across Los Angeles County and the DFW metro. He signs off on every quote the same way: with a written scope, a written price, and a written warranty, before anyone touches a window. That is the Haven Standard, Clause 1. You get the number in writing first.
We are independent, which matters. We are not a Mr-Glass authorized dealer, and we do not pretend to be one. What we are is a contractor that sources genuine Mr-Glass sashes, balances, and weatherstripping whenever the part still exists, and honest matched third-party aluminum and insulated glass when it does not. Browse our Mr-Glass sales & service overview for the full picture.
Common Mr-Glass Construction Problems We Solve in Irving
- Racked Classic 1000 frames on slab-on-grade ranches. North Irving homes sit on expansive clay that shrinks in summer drought and swells after spring rain. When the slab moves, the aluminum frame twists with it. You will see corner stress cracks at the miters and sashes that suddenly stick or bind. This is not a seal failure; it is structural movement.
- Peeling glazing tape on StormGuard 3000 units in Valley Ranch. Attic heat in Valley Ranch’s low-pitch roofs bakes the flexible sealant behind the glazing bead until it releases from the aluminum. Water finds the gap. The fix is pulling the glazing bead, cutting out the failed tape, and re-taping with a modern UV-stable sealant.
- Hardware stripping on Insulated 5000 patio doors. The door droops, catches on the track, and resists sliding. Most people assume the glass failed. The real culprit is usually stripped hinge screws or a worn roller assembly. Replace the hardware, re-level the panel, and the door works.
- Glass seal fogging on 1980s Classic 1000 fixed panels in Las Colinas towers. Morning-to-afternoon temperature swings across the prairie put constant stress on dual-seal units. The inner seal fails first, moisture condenses between the panes, and the view goes permanently hazy. We replace the insulated glass unit without pulling the entire frame.
- Storm damage from hail and wind on all Mr-Glass product lines. Irving catches serious hailstorms off the Texas clay flat. Cracked outer panes, dented mullions, and blown-out weatherstripping are regular call-outs. If the frame is still sound, we replace the sash or the insulated glass; we do not sell a full window where a component does the job.
BeforeAfterMr-Glass Service in Irving: What Local Conditions Mean for Your Equipment
Irving is the corporate construction capital of the DFW Metroplex, anchored by the Las Colinas Urban Center, one of the first master-planned corporate districts in the United States. What that means for Mr-Glass owners is specific and checkable: dozens of 1980s-era Mr-Glass Commercial 7000 storefront and curtainwall systems in Las Colinas are now hitting end-of-service-life on their structural glazing tape and dual-seal units all at roughly the same time. No neighboring suburb has that volume of aging Mr-Glass commercial glazing. Grand Prairie, Farmers Branch, Carrollton, they have some, but nothing like the concentrated storefront inventory along the Las Colinas canal and the adjacent office campuses. We also offer Dallas Mr Glass service for buildings just east of Irving. When three buildings on the same block need glazing tape replacement in the same season, you learn very quickly which tapes hold up under Texas sun and which fail in eighteen months. We carry the ones that hold.
On the residential side, Irving sits on Blackland Prairie soil. Montmorillonite clay shrinks in summer drought, swells in winter and spring rain, and the slab that was poured in 1963 does not move as one uniform piece. It heaves in sections. A kitchen addition or a window replacement on a North Irving ranch often starts with a foundation read before a permit gets pulled. For Mr-Glass frames, that clay movement means the difference between a window that seals and one that cracks at the corners within two years. Our tech pulled a three-panel Mr-Glass Classic 1000 sliding door off a 1963 ranch on Rock Island Road near Story Road last spring. The slab had heaved half an inch on the clay, racking the center fixed panel until the interlock split. We installed a new Mr-Glass replacement sill and corner keys, re-flashed the pan, and added a stainless tension rod at the header so the door tracks level for another decade. Measure twice, say it once, show your work.
Mr-Glass Models & Products We Service in Irving
We service the full Mr-Glass lineup that appears most often in Irving: the Classic 1000 Series, the Insulated 5000 Series, the StormGuard 3000 Series, and the Commercial 7000 Series. For active product lines, we source genuine Mr-Glass replacement sashes, balances, and weatherstripping. For discontinued 1000 and 3000 series parts, we use matched third-party extruded aluminum and insulated glass units that meet the same wind-load specifications. We stock common Irving-specific components locally: replacement glazing tape for StormGuard 3000 units, corner keys and sills for Classic 1000 ranch windows, and roller assemblies for Insulated 5000 patio doors. That local stock means faster turnaround on typical Irving failures, without waiting on a national distributor.
Mr-Glass Service Pricing in Irving
| Service | Price Range |
|---|---|
| Window Replacement (Mr-Glass single unit) | $4,500-$15,000 |
| Impact Window Installation (Mr-Glass StormGuard retrofit) | $8,000-$25,000 |
| Roof Replacement (full tear-off, Mr-Glass curb-mount skylight) | $8,000-$20,000 |
The spread on a window replacement reflects frame condition, glass package, and whether the opening has moved with the clay. A simple sash swap on a square opening costs less than a full frame replacement on a racked rough opening that needs re-flashing and header work. Your free estimate includes a written line-item scope, so you see the labor, the parts, and the warranty as separate numbers. Call (470) 298-9650 for an exact quote.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well, and we also provide Driveway & Pavers in Irving. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Mr-Glass Construction in Irving
Look for stress cracks at the aluminum corner miters and sashes that stick mid-track. Seal failure fogs the glass; slab heave distorts the frame. If the sash no longer sits square in the opening, the clay moved first. We confirm it with a quick frame check on site. Call (470) 298-9650 to schedule yours.
We replace the insulated glass unit in most Insulated 5000 panels without replacing the whole sash, as long as the aluminum sash is still structurally sound and the roller hardware is intact. If the sash is also worn or racked, a full replacement is the more durable play. Call (470) 298-9650 for a flat written quote either way.
Valley Ranch attic heat bakes the original flexible glazing tape until it detaches from the aluminum frame, and then water gets behind the bead. We fix it by removing the glazing bead, cutting out the failed tape, and re-taping with a UV-stable modern sealant. The frame stays. Call (470) 298-9650 for a free tape-and-seal assessment.
You get a written scope that includes glazing removal, insulated glass replacement to current energy and wind-load codes, new glazing tape or gasket, and interior and exterior cleanup. We coordinate after-hours access when the tenant cannot have a storefront down during business hours. Call (470) 298-9650 and we will walk the storefront with you first.
Usually yes. If the aluminum frame is still square and the mounting flange is intact, we replace the cracked lite or the full sash and re-weatherstrip it. The frame only gets replaced when the storm racked or dented it. Call (470) 298-9650 for an exact quote, estimates are free.
Service Areas Near Irving
We serve Irving and the surrounding DFW corridor, including Dallas, Grapevine, Coppell, Euless, and Grand Prairie. For other markets, see our Mr-Glass service in Fremont and Mr-Glass service in Los Angeles pages. Full coverage details are on our Irving service area page.
Book Your Mr-Glass Service in Irving Today
Call (470) 298-9650 to schedule your free Mr-Glass estimate. We answer with a live person, we show up in uniform, and you get the written price before any work starts. That is the deal, and the number is on the page.
Written by Grant Rowan, Owner at Rowan Construction Group, serving Irving since 2007.