A living room with a wall of new windows and a sliding glass door
M
Mr-Glass · Tampa, FL

Mr-Glass Construction in Tampa, FL

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A new bay window with a cushioned seat
A new casement window over a kitchen sink
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new stained cedar privacy fence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Mr-Glass Construction in Tampa, CA

Mr-Glass construction service in Tampa covers aluminum storefronts, window walls, sliding doors, and frameless shower enclosures inside homes and storefronts across the city. We’re an independent Mr-Glass service provider, not factory-authorized, and the local pros have rebuilt and re-flashed these systems in Tampa’s concrete-block homes long enough to know exactly how they fail under hurricane wind loads and karst slab movement. Call (470) 298-9650 for a written quote before any work starts.

Call (470) 298-9650

Most Tampa calls we get involve Mr-Glass 4500 Series window walls with stress cracks radiating from the corners, or 300 Series storefront weep holes that have clogged with algae and trapped water inside the frame. We strip the system down, document what we find with photos, and put the repair number in writing before anyone picks up a tool.

Why Tampa Residents Choose Us for Mr-Glass Service

New double-hung windows in a dining room

We know Mr-Glass extrusions, interlocks, and corner keys the way a roofer knows GAF shingles. That matters in Tampa because the 300 Series storefront and 4500 Series window wall behave differently in our humidity and wind than they do in a dry climate. We’ve pulled apart enough corroded corner keys in Seminole Heights and Palma Ceia to know exactly where the failure starts and what fixes it for good.

That estimating discipline is why every Mr-Glass repair we quote in Tampa is a flat written price with a written scope, not a phone number and a guess. Our techs are background-checked, uniformed, and they leave you a documented photo record of what we found and what we did, every visit.

We source genuine Mr-Glass extrusions and interlocks from independent glazing suppliers when the geometry demands an exact match. But for high-corrosion Tampa conditions, we upgrade to marine-grade anodized sections and stainless steel rollers. That’s not a brand endorsement. It’s what keeps the frame from failing again next rainy season. If you want the full picture of what we service, see our Mr-Glass sales & service page.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common Mr-Glass Construction Problems We Solve in Tampa

  • Clogged weep holes and corroded corner keys on 300 Series storefronts. Tampa’s wind blows fine construction dust and algae into the weep holes, which trap water inside the frame. The aluminum corrodes at the corner keys until the frame loosens and leaks. We clear the weep system, replace corroded keys with marine-grade sections, and re-flash the sill so the next storm doesn’t repeat the cycle.
  • Stress cracks in 4500 Series window walls on older CBS homes. Post-WWII concrete block homes in Tampa settle differently than wood-frame houses. A rigid Mr-Glass window wall installed over original stucco transfers slab movement directly to the lite. We see hairline cracks radiating from lower corners most often in Seminole Heights and East Tampa, where the 1950s blocks have shifted for seventy years.
  • Hinge sag on 750 Series frameless shower enclosures. Tampa bathrooms get damp and stay damp. The original 1970s wall blocking behind the tile wasn’t built to hold a heavy glass panel long-term, and hinge sag shows up within two to four years. We open the wall, install reinforced blocking, and reset the enclosure so the door swings true.
  • Interlock misalignment on 200 Series sliding doors after storm pressure cycling. Repeated pressure swings from Tampa’s summer storms push and pull the interlock until a 1/8-inch gap opens up. Wind-blown rain and fine dust get into the track, the rollers bind, and the door gets harder to move. We realign the interlock, replace worn rollers with stainless steel, and restore the seal.
  • Water intrusion at storefront sill flashings from wind-driven rain. Tampa’s June-to-September storms hit storefronts from every angle. When the sill flashing was originally installed without a proper end dam or back dam, wind pressure drives water up and over the sill into the interior. We rebuild the sill with proper drainage and document the fix before closing the wall.

Mr-Glass Service in Tampa: What Local Conditions Mean for Your Equipment

Installers setting a new window and checking it for level

Tampa sits on a karst limestone shelf, and Hillsborough County building officials routinely flag sinkhole disclosure requirements before issuing permits for new slabs, deep footings, or structural glazing retrofits. A geotechnical boring or ground-penetrating radar scan that a contractor handling Orlando Mr Glass service or Jacksonville work might never encounter is standard pre-construction due diligence here. Skipping it can void a homeowner’s insurance coverage on the finished structure. That single county-level requirement changes how we approach every Mr-Glass window wall or sliding door retrofit on an existing Tampa CBS home: the slab has to be scanned for voids before we can pull a final permit. We work from the geotechnical report to shim, silicone, and structurally reinforce the frame so the new glazing doesn’t crack when the slab shifts. This is not a step the local pros would take on a comparable job in Pinellas County, and it’s the reason a Mr-Glass repair in Tampa costs what it does.

The local pro was called to a 1963 Palma Ceia block home where two 4500 Series Mr-Glass windows had stress cracks radiating from the lower corners. The homeowner’s engineer had flagged a shallow void near the southeast corner, so we removed the sashes, installed stainless steel shims and a flexible anchor system before resetting the frames, then replaced the cracked lites with impact-rated glass. No new cracks through two rainy seasons. That’s the difference between tightening screws and fixing the reason they loosened.

Mr-Glass Models & Products We Service in Tampa

We service the full Mr-Glass aluminum lineup that shows up in Tampa’s commercial storefronts and residential glazing: the 300 Series Aluminum Storefront, the 4500 Series Window Wall, the 750 Series Frameless Glass Shower Enclosure, and the 200 Series Aluminum Sliding Door. Each has its own failure signature in this climate, and we’ve learned which ones to stock locally for fast turnaround.

When a Mr-Glass frame is older than 15 years and the interlock is worn, we recommend a full sash replacement rather than rolling new weatherstrip into a tired extrusion. The cost difference is honest, and we’ll show you the condition of the interlock in the photo record before you decide. For high-corrosion areas near Tampa’s waterfront, we upgrade to marine-grade anodized sections and stainless steel rollers as standard practice. If you’re outside Tampa proper, our Tampa service area page covers where we work.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Mr-Glass Service Pricing in Tampa

A galley kitchen opened up to the dining room with a new peninsula

What you pay depends on the Mr-Glass system, the condition of the frame, and whether Tampa’s sinkhole disclosure requirement triggers a geotechnical scan before permitting. Here are the line-item ranges we quote most often in Tampa:

Service Tampa Price Range
Impact Window Installation (per Mr-Glass opening) $8,000-$25,000
Mr-Glass Frameless Glass Shower Enclosure Replacement $4,500-$12,000
Mr-Glass Storefront Weatherstrip, Align, & Weep Cleaning $400-$1,800

Every quote is a flat written price with a written scope and a written warranty. No work proceeds on a change until the change order is signed, which is why our projects finish within a few percent of the number you agreed to. Call (470) 298-9650 for a free estimate on your Mr-Glass repair in Tampa.

Serving Tampa, FL - Our Local Coverage Area

We’re serving the Tampa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs - Mr-Glass Construction in Tampa

Service Areas Near Tampa

We serve all of Tampa and the surrounding Hillsborough County neighborhoods, including Seminole Heights, Palma Ceia, East Tampa, and the storefront corridors through downtown. For Mr-Glass work outside the Tampa metro, our Mr-Glass service in Anaheim and Mr-Glass service in Santa Ana pages cover those service areas.

Book Your Mr-Glass Service in Tampa Today

If your Mr-Glass storefront, window wall, or shower enclosure is showing signs of Tampa’s climate, call (470) 298-9650. We’ll put a written price in your hands before any work starts, and the photo record is included as standard.

Written by the team at Rowan Construction Group. Measure twice, say it once, show your work.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new front yard fence with a matching gateA new curved paver walkway to the front porchA walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA standing-seam metal roof over a covered porchA new wood side gate with black hardware

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Roofing

Shingle, tile and metal roofs over new underlayment and flashing, with new gutters and a full clean-up.

Explore roofing

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Tampa? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate in Tampa

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch