Oldcastle Kitchen Remodeling Nationwide

Oldcastle Kitchen Remodeling: The Los Angeles Owner’s Guide

If you have an Oldcastle kitchen component that has failed, you’re likely looking at an installed replacement cost between $2,360 and $15,340 in Los Angeles, depending on whether we’re talking countertops, cabinets, or a full section rebuild. We stock Oldcastle-compatible materials and can usually have a crew out within a week of a signed quote. Most Los Angeles homeowners discover the failure the same way: a countertop seam separates, a cabinet face delaminates from moisture, or an island base starts to sag and the drawers stop closing square. Call (470) 298-9650 for a written price before any work starts, under Clause 1 of the Haven Standard.

Call (470) 298-9650

One thing to get out of the way upfront: Rowan Construction Group is an independent contractor. We are not affiliated with Oldcastle, and we don’t present ourselves as a factory service center. What we are is a Los Angeles kitchen remodeling contractor that has worked with Oldcastle and Oldcastle-compatible materials across enough jobs to know what fails, what’s worth repairing, and what’s worth replacing. That’s the honest split.

Key Takeaways:

• Oldcastle kitchen component replacement in Los Angeles runs $2,360 to $15,340 installed, depending on scope.
• We quote a flat written price before any tool comes off the truck, no change orders without your signature.
• We can source OEM Oldcastle parts or quality aftermarket equivalents and will show you the price difference before you choose.
• If the failure involves water damage behind cabinets or countertops, that substrate inspection is included in the quote, not an adder.

Which Oldcastle Models This Applies To

Oldcastle manufactures and supplies kitchen components through a few different channels, and the compatibility question is the first thing we resolve on a walk-through. The most common Oldcastle products we see in Los Angeles kitchens are pre-cast concrete countertops, modular cabinet systems, and island base units. The gotcha: Oldcastle’s modular cabinet lines changed hardware spacing and hinge boring patterns between series years, so a cabinet door from a 2018 series will not always fit a 2023 frame even when the face dimensions match.

How to identify what you have: open a cabinet door and look at the inside of the hinge cup. Oldcastle typically stamps a series code and a date code on the hinge plate or the adjacent frame. Take a photo of that. Then measure the door overlay, which is the amount the door overlaps the frame, in sixteenths. Write that down. If you have a concrete countertop, check the underside for a cast-in date and batch mark near the sink cutout. That information lets us match OEM parts or, when OEM is discontinued or on backorder, spec an aftermarket door or drawer front that matches the overlay and hinge spacing without guessing. We always quote both options when both exist.

Los Angeles matters here. Oldcastle concrete countertops hold up well in our dry climate, but near the coast in places like Santa Monica or Playa del Rey, salt air and moisture cycles shorten the life of sealers and can cause spalling at edges. We routinely see coastal Los Angeles countertops needing resurfacing three to five years earlier than the same tops in Silver Lake or Pasadena. That’s not a defect, it’s geography, and it informs what we recommend.

Signs Your Oldcastle Kitchen Remodeling Is Failing

• Countertop seams separating or lifting. This usually means the adhesive bond has failed, typically from sustained moisture exposure or original installation with the wrong adhesive for the material. In concrete, it can also signal slab movement. We’ll inspect the substrate before quoting a repair.
• Cabinet doors that no longer align or close square. On Oldcastle modular frames, this is often hinge plate wear, but if every door on one cabinet is off, suspect the box itself has racked or the wall behind it has shifted. Los Angeles is seismic country; wall movement shows up in cabinetry first.
• Swollen or delaminating cabinet surfaces under the sink. The under-sink cabinet fails first in nearly every kitchen, Oldcastle included, because a slow drip or condensation level goes unnoticed. The face veneer peels, the frame swells, and the fix is usually a new cabinet box, not a patch.
• Island base sagging or drawers binding. Islands carry the heaviest use and the least visible support. We find failed leveling feet, separated corner blocks, or inadequate framing from the original install. That’s structural, and it needs more than shims.
• Concrete countertop pitting or chipping at the edge. Small pits turn into larger spalls as water gets in and cycles. In Los Angeles, even minor spalling in an outdoor-adjacent kitchen can accelerate quickly. We patch and reseal when the substrate is sound, replace when it’s not.

Before

After

Replacement Cost & What’s Included

For a Los Angeles kitchen, here’s the honest range on Oldcastle-related work:

• Countertop resurfacing or seam repair: $2,360 to $7,670 depending on linear feet and material.
• Cabinet door and drawer front replacement: $4,720 to $15,340 when we’re matching series hardware and replacing faces only.
• Full island base rebuild or replacement: $3,540 to $11,800, depending on size, finish, and whether the countertop needs to be reset.
• Complete kitchen remodel involving Oldcastle materials: $16,520 to $53,100.

What drives the range is scope, not mood. A seam repair on a 6-foot run costs less than a full island rebuild. A door replacement on a 2018 series with available OEM stock costs less than a 2015 series requiring aftermarket match work. Every quote we write in Los Angeles includes labor, materials, haul-away, and a written scope so you can see exactly where the dollars go. If something changes mid-job, no work proceeds until you sign the change order. That discipline has kept our projects within a few percent of the agreed number across 4,000-plus jobs since 2007. The work comes with our 365-Day Done Right Promise, printed on the page and backed by a terms page, not an asterisk.

We also keep KraftMaid and Wellborn cabinet lines, plus Cambria and Silestone countertop stock in our sourcing rotation. That sourcing depth means we can give you real numbers instead of inflated ones when an Oldcastle part is backordered and a substitute is the better move.

DIY or Call Us?

What’s safe to check yourself: pull the drawers out and look at the glides and corner blocks. Take photos of the hinge stamps, the date codes, the seam separation you’re seeing. Measure overlay and write it down. That’s useful information, and it makes a phone call more productive. What’s not a DIY job: resetting a concrete countertop, shimming or re-framing an island, cutting a new sink cutout into stone or engineered concrete, or removing any section that sits against stone or tile. Concrete counter sections are heavy enough to injure you, and a misjudged lift can damage the cabinetry underneath. Leave the lifting and the cutting to a trained crew. We’ve got background-checked, uniformed technicians, and every visit includes a documented photo record of what was found and what was done. That’s standard on every job, not an upgrade.

If you’re not sure whether your Oldcastle kitchen component can be repaired or needs replacing, call (470) 298-9650. We’ll talk through what you’re seeing, tell you honestly if it’s worth a service call, and give you a written price before anyone starts. No phone gymnastics, no mystery number.

FAQs