A remodeled primary bathroom with a soaking tub and a walk-in shower

PGT Bathroom Remodeling Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
An open kitchen and dining area after a remodel
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
A new front entry door with glass sidelights
A new black aluminum pool fence with a gate
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Bathroom Remodeling: The Los Angeles Owner’s Guide

PGT bathroom remodeling in Los Angeles typically runs $10,620 to $33,040 for a full bathroom replacement, including new fixtures, waterproofing, and finish work. We stock and install PGT-compatible shower enclosures, glass panels, and hardware, and in most cases we can have your new PGT parts measured and installed within five to seven business days of the written quote. Most owners discover a PGT part has failed the hard way: a shower door starts dragging, a hinge loosens and won’t retighten, or a glass panel develops a rattle that gets worse every morning.

Call (470) 298-9650

We’re an independent contractor, not a PGT dealer or affiliate. That matters for one reason: we don’t have to sell you a factory bundle. We match what’s on your wall, tell you what it costs, and put the number in writing before any work starts.

Which PGT Models This Applies To

A tile setter installing wall tile in a shower

PGT’s bathroom product lines fall into three families: the 1500/2500 series sliding and swinging shower doors, the VinylView and ClearView fixed glass panels, and a smaller line of frameless enclosures built under the WinGuard label for coastal and high-wind zones. Compatibility is rarely interchangeable across these families. A 1500-series roller assembly will not fit a WinGuard track, and a ClearView hinge pin is sized differently from the 2500 series even though both look like a standard 3/8-inch pin at a glance.

Here’s the check that saves time and money: look at the bottom corner of the glass panel or the top rail of the door. PGT acid-etches the series number into the metal or glass edge, usually within six inches of a corner. If the etching is worn off, measure the glass thickness. PGT sliding doors run 3/16-inch or 1/4-inch glass; frameless WinGuard panels are 3/8-inch. That measurement alone eliminates half the wrong parts before we even open the truck.

On OEM versus aftermarket: PGT’s factory hardware is solid but priced at factory margins. For rollers, hinge pins, and door sweeps, we routinely install aftermarket equivalents from CRL and Prime-Line that meet or exceed the original spec. For glass panels themselves, aftermarket is rarely worth the risk. The tempering standard, edge finish, and hole placement are too specific. We quote OEM glass on any PGT panel replacement and aftermarket only on mechanical hardware where the material spec is published and verifiable.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your PGT Bathroom Remodeling Is Failing

  • The door drags or binds when you slide it. This is almost always a roller assembly losing its bearing surface. PGT rollers on the 1500/2500 series ride on nylon wheels over an aluminum track, and Los Angeles hard water accelerates the wear by leaving mineral deposits that grind the nylon down. Once the wheel is scored, the door rides on the track edge and the binding gets worse by the week.
  • A hinge loosens and won’t stay tight. The threads in PGT’s aluminum frame strips are tapped at the factory. Once those threads strip from overtightening or repeated adjustment, no amount of tightening fixes it. The repair is a new frame strip or a threaded insert, not a new screw.
  • Water seeps under the door or panel even when it’s closed. The vinyl sweep on PGT doors hardens with age and exposure to cleaning products. Los Angeles owners who use bleach-based shower sprays see this failure two to three years earlier than those who don’t. The sweep is a five-minute swap, but the water damage it allows is not.
  • The glass rattles in the frame. PGT glazing gaskets lose their compression after roughly eight to ten years in our climate. The glass isn’t loose in the opening; the gasket has simply flattened. It’s cosmetic at first, but a rattling panel puts stress on the hinge screws and will eventually crack a corner.
  • Cloudy white deposits build up at the glass edges. This is mineral intrusion between the glass and the frame. In Los Angeles, our water runs hard in most neighborhoods, and once deposits get between the glass edge and the gasket, they can’t be cleaned out from the surface. It’s a sign the seal has failed and moisture is sitting in a place it shouldn’t.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A single-story rear room addition with tall windows and a new patio

A PGT bathroom remodel in Los Angeles breaks into three price bands. A full bathroom remodel with PGT glass, new shower pan, tile, fixtures, and hardware runs $10,620 to $33,040 depending on bathroom size and finish level. A shower-only PGT enclosure replacement, with new glass and hardware but no tile or pan work, runs $5,310 to $14,160. A hardware-only swap, replacing rollers, hinges, sweeps, and gaskets on existing PGT glass, runs $945 to $3,540.

Every quote includes the same line items: removal and disposal of the old parts, new hardware or glass, installation labor, sealant, and a written workmanship warranty. We don’t bury disposal fees or add a surprise trip charge. Under Clause 1 of the Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order. That’s how we’ve kept 4,000-plus projects within a few percent of the agreed number.

DIY or Call Us?

There’s an honest split here. A homeowner can safely replace a PGT door sweep, clean the track, or remove visible mineral deposits with a vinegar solution. Those are maintenance tasks, not repairs, and doing them yourself will extend the life of your hardware.

What an owner should not do is attempt to remove or reseat a PGT glass panel. These panels weigh 40 to 80 pounds, they’re tempered, and when a tempered panel touches tile at the wrong angle it doesn’t crack slowly. It detonates into thousands of small pieces. The hinge hardware on PGT frameless doors is under constant tension too. If a panel is loose, rattling, or misaligned, that’s a call to (470) 298-9650. We’ll measure, quote, and install it with the right tools and a second set of hands, and the photo record of what we found and fixed comes standard on every visit.

FAQs

A new clay tile roof

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch