A living room with a wall of new windows and a sliding glass door
PGT · San Francisco, CA

PGT Construction in San Francisco, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A new casement window over a kitchen sink
A new multi-panel patio door opening a kitchen to the patio
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Construction in San Francisco, CA

We provide independent PGT window and door service across San Francisco, from replacement sashes in Outer Richmond flats to full WinGuard installations on Mission District Victorians. The one thing that separates our PGT work here is that we scope every job against DBI plan-check triggers first, because a window replacement on a three-story building in San Francisco can become a code-mandated impact-glazing retrofit overnight. Call (470) 298-9650 and we’ll walk you through what your specific building will actually require before you spend a dollar.

Call (470) 298-9650

The local pros work on PGT WinGuard, SpectraGuard, and PremierVue installations weekly across San Francisco’s Victorian and Edwardian housing stock, so we know how PGT aluminum and vinyl frames hold up against marine fog, seismic racking, and DBI plan-check demands without claiming any factory tie. We’re an independent PGT sales & service provider, not manufacturer-affiliated or authorized, and that independence means we tell you when a repair makes sense and when a full replacement is the honest call. If you’re researching contractors the way you research appliances, reading the three-star reviews and wanting numbers in writing before anyone shows up, you’ll find we work the same way.

Why San Francisco Residents Choose Us for PGT Service

A new bay window with a cushioned seat

PGT windows in San Francisco live a harder life than the manufacturer’s Florida test labs ever anticipated. Fog doesn’t just sit on the glass; it works into weep holes, sash corners, and aluminum extrusions for months at a stretch. Seismic activity flexes frames in ways that fatigue rollers and seals. And the Department of Building Inspection’s plan-check process means a window that should be a simple swap can turn into a structural review if you’re on the wrong side of three stories. We’ve spent years learning exactly where those failure points concentrate in this city, block by block.

Under Clause 1 of the Haven Standard, every project gets a written price and written scope before work begins. You get a documented photo record on every visit, not as an upgrade but as standard. And if something isn’t done right, the Done Right Promise means we make it right. We’ve delivered 4,000-plus projects this way, and the paperwork trail is the proof.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common PGT Construction Problems We Solve in San Francisco

  • Fog-driven corrosion on WinGuard aluminum frames in Sunset and Outer Richmond. Salt air lingers at weep holes and sash corners, and over time the aluminum extrusion pits and binds. We see this most on bay-facing elevations where the marine layer sits longest. If the extrusion is still sound, we clean, treat, and reseal; if the corrosion has compromised the frame, we’ll tell you straight and quote a replacement.
  • Roller and balance fatigue in PremierVue horizontal sliders. Years of fog- and wind-driven use in bay-facing flats wears the nylon rollers and stretches the balance assemblies. The window gets heavy, sticks, or drops. We replace the rollers and balances with quality aftermarket hardware that matches original fit, because PGT no longer stocks hardware for some older PremierVue runs.
  • Failed wedge seals and interlocking meeting rails on WinGuard casements. Persistent marine moisture works into the seals and the meeting rails start leaking air and water. You’ll feel the draft on a windy Outer Richmond afternoon. We replace the weatherstripping and realign the meeting rails; when the seal failure has allowed water into the sash itself, we replace the sash.
  • Fogged or failed insulating glass units in SpectraGuard picture windows. Thermal cycling between damp morning fog and afternoon sun causes the sealed unit to fail, and you get condensation between the panes that won’t wipe away. We replace the insulated glass unit in place when the aluminum extrusion is still true, saving you the cost of a full sash.
  • Frame deformation from soft-story retrofit racking. When a building undergoes seismic retrofit, the entire structure shifts and settles. PGT frames can twist enough that the sash no longer seats square. We rebuild the rough opening, re-shim, and reinstall; when the frame itself has deformed beyond reliable resealing, we’re honest that full window replacement is the only fix that will pass DBI inspection.

PGT Service in San Francisco: What Local Conditions Mean for Your Equipment

Here’s the piece of San Francisco-specific knowledge that changes how you should plan any PGT project: the Department of Building Inspection requires any window replacement on buildings over three stories to use impact-rated or laminated glazing. That single rule pushes PGT WinGuard from a coastal luxury into a code-mandated retrofit item in dense neighborhoods like the Mission and Nob Hill. It is not true across the bay in Oakland or Berkeley, where PGT repair in Oakland follows different rules, and it catches homeowners off guard every month. On a four-story Edwardian flat on Guerrero Street in the Mission, DBI triggered full plan check after our client added a rear bedroom. The new opening required impact-rated windows. We installed two PGT WinGuard casements with laminated glass, but fog-driven moisture had already rotted the original sill framing, so our tech rebuilt the rough opening with pressure-treated lumber and resealed the brick veneer before the sashes went in. The final inspection passed without correction because the window schedule matched the approved plans exactly. That’s the difference between a contractor who knows San Francisco’s DBI triggers and one who discovers them mid-project.

PGT Models & Products We Service in San Francisco

We work on the full PGT residential lineup: WinGuard Aluminum, the impact-rated workhorse that DBI often mandates on taller buildings; SpectraGuard, the insulated-glass line that shows up in picture windows and fixed lites; PremierVue, the horizontal slider series that dominates bay-facing flats; and ClassicVue, the entry-level vinyl line still common in 1990s-era San Francisco remodels. When structural or warranty-adjacent integrity is at stake, we source genuine PGT replacement sashes, balance assemblies, and weatherstripping. But for out-of-production Series 100 or ClassicVue hardware, we use quality aftermarket rollers and locks that match original fit and finish. We repair frames and replace insulated glass when the aluminum extrusion is still sound. Full sash or window replacement is honest advice when racking from soft-story retrofits has deformed the frame beyond reliable resealing.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

PGT Service Pricing in San Francisco

San Francisco pricing reflects the city’s labor market, DBI permit fees, and the age of the housing stock. A PGT WinGuard impact window installation runs $2,950 to $7,350 per 4×6 ft unit, labor included. Replacing a fogged SpectraGuard insulated glass pane costs $710 to $2,950 depending on size and Low-E coating. A full window replacement with PGT ClassicVue runs $1,770 to $5,900 per opening. And when a soft-story retrofit-related window opening needs rebuilding with shoring, expect $5,310 to $14,160 per opening. Those are the numbers we put in writing before any work starts. Call (470) 298-9650 for a free estimate with exact figures for your building.

Service Price Range (San Francisco)
PGT WinGuard impact window installation (per 4×6 ft unit, labor included) $2,950-$7,350
PGT SpectraGuard insulated glass replacement (per pane) $710-$2,950
Window replacement with PGT ClassicVue (per opening) $1,770-$5,900
Seismic retrofit-related window opening rebuild (per opening, including shoring) $5,310-$14,160

Serving San Francisco, CA - Our Local Coverage Area

We’re serving the San Francisco area and know this community well, from Fence Installation - San Francisco to window service. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.

FAQs - PGT Construction in San Francisco

Service Areas Near San Francisco

We serve the entire San Francisco service area, including the Mission, Noe Valley, Sunset, Outer Richmond, Nob Hill, and the Marina. For PGT work outside the city, we also maintain crews that handle PGT service in Fort Worth and PGT service in Fresno. Same service standards, same written-price discipline, same documented photo record on every visit.

Book Your PGT Service in San Francisco Today

We put the number in writing before anyone picks up a tool, and we show you the photos when the job’s done. Call (470) 298-9650 to schedule your free PGT estimate in San Francisco, or ask about our San Francisco Driveway & Pavers services. Bring a competitor’s quote if you have one; we’ll review it line by line at no charge.

Written by the team at Rowan Construction Group.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A garage converted into a guest room and home officeNew architectural shingles with a clean valleyNew painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted wallsA freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing roofline

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Roofing

Shingle, tile and metal roofs over new underlayment and flashing, with new gutters and a full clean-up.

Explore roofing

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in San Francisco? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate in San Francisco

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch