Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
After## Quikrete Fence Installation: The Los Angeles Owner’s Guide
Quikrete fence installation in Los Angeles typically runs $4,130-$10,620, with most projects landing near $7,000 for a standard 50 to 80 linear foot run using Quikrete fast-setting concrete for post footings. We stock Quikrete-compatible materials on our trucks and can usually start within 5 to 7 business days. The way most Los Angeles homeowners discover a problem is subtle at first: a gate dragging, a post that’s begun to lean after a rain, or hairline cracks spreading across a footing that looked fine six months ago.
At Rowan Construction Group, we’ve installed and repaired fence lines across Los Angeles since 2007, and we’ve seen the same failure pattern repeat itself: concrete that wasn’t mixed to spec, posts set too shallow for the soil, or water finding its way into a footing and doing what water does. Grant Rowan trained in construction technology at Los Angeles Trade-Technical College, where concrete mix ratios and curing times were drilled into him before he ever touched a paying job. That’s the lens we apply to every Quikrete fence pour.
Key Takeaways:
– Installed Quikrete fence work in Los Angeles: $4,130-$10,620
– Most common failure point: post footings, not the panels themselves
– Quikrete fast-setting mix works, but only when the hole depth and water ratio are right
– We’re an independent contractor, not affiliated with Quikrete
– Every quote is a written price before any work starts
—
## Which Quikrete Models This Applies To
Quikrete isn’t a fence brand. It’s a concrete and masonry products manufacturer, and when homeowners talk about “Quikrete fence installation,” they mean fence posts set in Quikrete concrete mix rather than generic bagged concrete or pre-mixed alternatives. The products that apply here are Quikrete Fast-Setting Concrete Mix (No. 1004), Quikrete Concrete Mix (No. 1101), and occasionally Quikrete High-Strength Concrete Mix (No. 1107) for taller or heavier gate posts.
The compatibility gotcha most Los Angeles owners miss: Fast-Setting Concrete Mix sets in 20 to 40 minutes, but it’s not designed for holes deeper than 3 feet without special handling. In expansion soils like parts of the San Fernando Valley, a 3-foot-deep post hole in fast-setting mix can cure too quickly on the outside while staying crumbly at the core. That’s the kind of thing you find out when the gate post starts moving two seasons later.
For fence posts, we standardize on Quikrete Concrete Mix for most residential runs and reserve the fast-setting product for gate posts or tight-schedule jobs where the mixed bag size matches the hole volume. The OEM-versus-aftermarket question barely applies here: Quikrete is itself the aftermarket option relative to custom-mixed concrete from a batch plant. The difference is consistency. A bag gives you a predictable mix every time, which is why we use it.
—
## Signs Your Quikrete Fence Installation Is Failing
- The post leans but the panel is still straight. This is almost always a footing problem. The concrete set, but it didn’t bond to the post, or the hole was too narrow and the concrete is acting like a loose sleeve rather than an anchor.
- Cracks running through the concrete collar at ground level. Los Angeles gets more freeze-thaw stress than people think, especially in foothill neighborhoods like Tujunga or La Crescenta. Water seeps into micro-cracks, expands, and splits the footing over two or three winters.
- The gate drags or won’t latch. Gate posts carry triple the lateral load of a line post. When the footing starts rotating under that load, the gate hardware is the first thing to tell you.
- You can push the post and see the concrete move with it. That means the footing lost contact with the surrounding soil, usually because the hole wasn’t compacted at the bottom before the pour. The fix is a full re-set, not a shim.
- White chalky residue on the concrete surface. Efflorescence means water is moving through the footing. It’s not structural by itself, but it tells you moisture is present where it shouldn’t be, and in Los Angeles clay soils that moisture cycles and shifts the ground around your post.
—
## Replacement Cost & What’s Included
In Los Angeles, expect to pay $4,130-$10,620 for a full Quikrete fence installation, depending on how many posts need to be set and whether we’re working with existing panels or starting fresh. On the lower end: a 40 to 50 foot run with 8 to 10 posts, all holes dug to spec, Quikrete mix supplied and poured, posts leveled and braced. On the higher end: 80+ linear feet, a heavy gate with hardware, removal of old failed footings, and soil conditions that require deeper holes or more mix per post.
The range widens because Los Angeles neighborhoods sit on very different ground. A post hole in Sherman Oaks goes through soft sandy loam that drains well. A post hole in View Park can hit dense clay that holds water against your footing for months. We price per post with written line items: digging, mix material, pour, leveling, bracing, cleanup. No lump-sum “fence installation” charge that hides the line items.
Every job includes the written price before we start, a documented photo record of the work, and the 365-Day Done Right Promise: if it’s not done right, we make it right.
—
## DIY or Call Us?
You can safely inspect your own fence. Walk the line, press each post, look at the concrete collar at ground level for cracks or separation. Check whether the gate post moves when you pull it toward you. Those observations help you describe the problem to us accurately.
What you shouldn’t do is dig out and re-set a failed post yourself if the fence carries any weight, sits on a slope, or supports a gate. The reason is concrete cure time and hole geometry. Most DIY failures we’re called out to fix came from holes dug too narrow or too shallow, mix poured straight from the bag without enough water, or posts set plumb that drifted during the 24 to 48 hours the concrete actually takes to reach structural strength. A post that’s 2 inches out of line at the top is a fence that fights itself for the next decade. If you’re anywhere in Los Angeles and you’re seeing footing failure, call us at (470) 298-9650 and we’ll put the number in writing before anything gets torn out.
—
## FAQs
### How long does Quikrete concrete last in a Los Angeles fence footing?
A properly mixed and poured Quikrete footing in Los Angeles should last 25 to 40 years, provided the post was set to the right depth and the soil drains reasonably well. The concrete itself rarely fails; what fails is the bond between concrete, post, and surrounding soil.
### Can you repair a leaning fence post without re-pouring the concrete?
Not reliably. Products that claim to brace a leaning post from the surface don’t address the footing failure underneath. In our experience across Los Angeles, the honest fix is pulling the post, clearing the old footing, and re-setting it properly. That’s the repair that lasts.
### How long does a Quikrete fence installation take?
A standard 50 to 80 linear foot run takes 2 to 3 working days: day one for demolition and hole prep, day two for pours and post setting, day three for panel reattachment, gate hardware, and cleanup. We give you a written timeline with the written price, and no change happens without a signed change order.
### Do you stock Quikrete products on the truck?
We keep Quikrete Concrete Mix and Fast-Setting Concrete Mix on our trucks for fence work, along with galvanized post hardware, Simpson Strong-Tie connectors, and gate kits from brands like KraftMaid, Cambria, and Silestone for larger custom projects. If your job calls for a specific mix, we can source it before we arrive.
*Written by Grant Rowan, Owner, Rowan Construction Group at Rowan Construction Group, serving Los Angeles and nearby areas.*