A living room with a wall of new windows and a sliding glass door

Therma-Tru Windows & Doors Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
New double-hung windows in a dining room
A new front entry door with glass sidelights
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
A remodeled primary bathroom with a soaking tub and walk-in shower
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Therma-Tru Windows & Doors: The Los Angeles Owner’s Guide

Therma-Tru window and door part replacement in Los Angeles typically runs $180-$340 for common components like weatherstripping, sweeps, and hinge sets, while full door slab or window sash replacements land between $470 and $2,950 installed depending on the model line and glass package. We keep the most common Therma-Tru-compatible parts on hand for first-trip fixes, and we can order the exact OEM match for anything unusual. Most Los Angeles owners discover a failed part the way you just did: a draft that wasn’t there last winter, a threshold that catches the door, or a window that suddenly takes two hands to close.

Call (470) 298-9650

Which Therma-Tru Models This Applies To

A new bay window with a cushioned seat

Therma-Tru builds four primary door lines we service regularly across Los Angeles: the Classic-Craft, Fiber-Classic, Smooth-Star, and Pulse series. Each line uses different slab construction and hardware prep, which matters when matching a replacement part. Classic-Craft and Pulse share a deeper door slab profile, so weatherstripping from a Smooth-Star will not seal correctly on those frames. The window side of the catalog includes the Benchmark and Profile series, with sash balances and tilt latches that are specific to each.

Here’s the compatibility gotcha we see often: Therma-Tru stamps the manufacturing date and plant code on the hinge edge of the door slab and on the spacer bar of window glass. If you can read that code, we can match the part the first time. If the label is painted over or gone, we measure the slab thickness, hinge prep pattern, and weatherstrip channel profile before ordering anything. On the OEM-versus-aftermarket question, Therma-Tru’s weatherstripping and corner seals are worth buying as OEM because the kerf dimensions are odd: 3/16-inch channels that generic replacements don’t seat properly. Hinges and sweeps, however, have solid aftermarket equivalents at roughly 40-50% of Therma-Tru list price, and we’ll tell you which is which instead of defaulting to the pricier option.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Therma-Tru Windows & Doors Is Failing

  • A draft you can feel at the latch stile - The compression weatherstrip on Therma-Tru doors loses its memory after 6-10 years in Los Angeles’s dry heat. The channel itself is usually fine; the strip inside it has flattened and won’t recover.
  • The door catches on the threshold or the jamb - Los Angeles homes on expansive clay soil shift seasonally, and this re-alignment problem is more common in neighborhoods like Encino and the Crenshaw district than in coastal areas with more stable subgrade. The fix is adjusting the hinge or re-setting the frame, not sanding the slab.
  • Window sash won’t stay up - Tilt-latch and spiral balance failures happen more frequently where windows get direct afternoon sun, which means west-facing walls in Los Angeles fail faster than shaded east exposures.
  • Visible daylight around the perimeter - The adjustable compression seals at the top and bottom of the frame have loosened or worn, and the door’s original weather seal has walked out of its channel.
  • Condensation between the glass panes - The insulated glass unit’s seal has failed. That’s a sash or glass-pack replacement, not a caulk job. We see this most often on door glass that gets full sun, which accelerates seal breakdown in the Los Angeles climate.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Here is where the money goes on Therma-Tru windows and doors in Los Angeles. Weatherstripping and corner-seal replacement runs $180-$340, including the OEM parts and the labor to set them correctly. Threshold and sweep replacement falls in the same band, $190-$380 depending on the threshold profile. A new hinge set or multipoint lock hardware lands at $350-$825. Full door slab replacement with a factory-matched Therma-Tru slab runs $944-$2,450 installed. Window sash and insulated glass replacement in the Benchmark or Profile lines runs $470-$1,180 per sash. You receive a written scope with the part numbers and a flat price before any work starts, under Clause 1 of the Haven Standard. The Done Right Promise covers the installation work and parts we supply.

DIY or Call Us?

Some Therma-Tru part replacements are genuinely safe to do yourself. Swapping a worn sweep or checking the weatherstrip channel for debris is a ten-minute job with a screwdriver. Adjusting the adjustable hinges on a Smooth-Star door is also reasonable if you have a hex key set and patience. What we’d caution against is touching the multipoint lock hardware or the threshold on a Pulse series door: the strike plate alignment is unforgiving, and a mis-set multi-point lock can bind the door shut. The same applies to window sash work. Spirals and tilt-latch mechanisms are under tension and easy to damage if the sequence isn’t right. A damaged sash balance is not dangerous to you, but it will cost more to re-do than it saves. If you are anywhere near Los Angeles and unsure whether the part you’re holding is a ten-minute swap or a two-hour alignment job, send us a photo or call (470) 298-9650 and we’ll tell you straight.

FAQs

Installers setting a new window and checking it for level

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch