A remodeled primary bathroom with a soaking tub and a walk-in shower

Toto Home Additions & ADU Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A new paver pool deck
An open kitchen and dining area after a remodel
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
A new front entry door with glass sidelights
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Toto Home Additions & ADU: The Los Angeles Owner’s Guide

A Toto-equipped home addition or ADU in Los Angeles typically costs $53,100-$153,400 when we build it from foundation to finish, with the Toto fixtures, toilets, and bath hardware specified and installed as part of the scope. We stock and install Toto plumbing fixtures across every ADU and addition we build, and we can usually have a crew on site within 3-5 business days for a walk-through and written price. Most owners discover a Toto-specific problem in these spaces one of two ways: a slow leak at the tank-to-bowl connection that shows up as a water stain on new flooring, or a fill valve that cycles every 20 minutes in the middle of the night.

Call (470) 298-9650

Quick answer, plainly: if the Toto component failing is a toilet, bidet seat, or faucet inside a permitted addition or ADU, that’s a repair call, not a remodel. If the framing, shear wall, foundation, or rough plumbing around that Toto fixture is what failed, that’s the $53,100-$153,400 conversation. We’ll tell you which one you have before we quote anything.

Key Takeaways

  • Toto fixtures inside an addition or ADU fail differently than those in a 1950s bathroom: newer supply lines, tighter code, different water pressure expectations.
  • The written price covers the Toto fixture, the rough-in work around it, and the finish work; the warranty is written and tied to the Haven Standard, not a verbal promise.
  • If you have a competitor’s quote, bring it in. We’ll review it line by line at no charge, per our standing second-opinion policy.
  • Los Angeles ADUs have specific DWP and LADBS plumbing-permit requirements; we pull those permits and document the inspection results.

Which Toto Models This Applies To

A tile setter installing wall tile in a shower

Toto’s lineup splits into two rough worlds: the Drake and Drake II (standard 12-inch rough-in, G-Max or Tornado Flush), and the skirted models like the Nexus, Aquia, and Ultramax II, which use Toto’s Uni-Fit adapter and hide the trapway behind a smooth skirt. The compatibility gotcha in Los Angeles ADUs: many homeowners order a skirted Toto online, then discover the rough-in is 10 inches because the ADU’s wet wall was framed tighter than the original house. Toto’s Uni-Fit solves this, but only if you buy the right adapter, and most big-box sets don’t include it. Measure from the finished wall to the center of the waste flange before you order anything. If you’re between 10 and 14 inches, we can make the correct model work; if it’s under 10, we’re moving the flange, and that’s a permitted plumbing change.

For Toto bidet seats (Washlet series), the Toto-specific reality is electrical: Washlets need a GFCI outlet within reach of the toilet, and most 2010-era Los Angeles bathrooms don’t have one. Adding that outlet inside an ADU usually requires a small electrical permit and a LADBS inspection. We handle that as part of the fixture install, not as a separate surprise. OEM Toto parts (fill valves, flappers, Uni-Fit gaskets) are what we use by default, because Toto’s flush performance depends on the precise geometry of those parts. Aftermarket equivalents exist and can save 15-20%, but on a toilet that sees daily use in a rental ADU, we recommend OEM. We’ll show both numbers on the written estimate and let you choose.

We also work with KraftMaid and Cambria for cabinetry and countertops in these spaces, and Silestone when a client wants a specific quartz pattern. But when the fixture spec says Toto, we keep it Toto end to end.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Toto Home Additions & ADU Is Failing

  • Water staining on the ceiling below the ADU bathroom. This usually means the Toto toilet’s wax ring or Uni-Fit gasket has failed, and effluent is seeping into the subfloor. In a two-story addition, this shows up on the ceiling below; in a garage-conversion ADU, it shows up as a musty smell near the floor plates.
  • The fill valve cycles every 20-40 minutes without a flush. That’s a slow leak past the flapper or, on tornado-flush models, a degraded seal at the flush tower. It’s a $12-$45 part, but in an unoccupied ADU it can run 2,000 gallons a month through the meter before anyone notices.
  • The bowl water level drops below the normal line between uses. On Toto’s skirted models, this often points to a hairline crack in the internal trapway, which you can’t see from the outside. That’s a fixture replacement, not a repair.
  • A rocking toilet base. In a newer ADU, tile setters sometimes leave a slight depression around the flange, and Toto’s wider skirted bases sit on a smaller footprint than the tile’s tolerance, so they rock on the high point. Leveling shims fix it, but only if they go in before the caulk bead.
  • Weak or incomplete flush on a Drake II that used to clear everything. This is almost always a partially clogged rim jet or a failing flapper chain length issue, but in Los Angeles hard-water neighborhoods (the San Fernando Valley especially), mineral crust on the jet holes is the usual culprit.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

New architectural shingles with a clean valley

A Toto toilet replacement inside a Los Angeles home addition or ADU runs $945-$3,540 installed, depending on whether we’re swapping the fixture only or also correcting the rough-in, replacing the shutoff valve, and pulling a small plumbing permit. A full bathroom build inside an addition starts at $10,620, and a complete ADU runs $106,200-$259,600 depending on square footage, foundation type, and the Toto fixture package you spec. The number we put in writing is a flat price with a written scope and a written warranty. No change proceeds without a signed change order. Under Clause 1 of the Haven Standard, that price is delivered before anyone picks up a tool.

Scope Los Angeles Installed Range
Toto toilet replacement (fixture only) $945-$3,540
Toto Washlet bidet seat + GFCI outlet install $945-$2,950
Full bathroom remodel within addition $10,620-$33,040
Complete home addition $53,100-$153,400
Complete ADU construction $106,200-$259,600

What drives the range: rough-in distance, floor condition around the flange, whether a permit and inspection are needed, and whether the shutoff valve is original or needs replacement. We document all of it with our photo record on every visit, included as standard.

DIY or Call Us?

A fill valve or flapper swap is a 20-minute job with a screwdriver, and Toto’s parts are genuinely easy to service. But a toilet that rocks, leaks at the base, or sits on a wrong rough-in is a different problem: water leaking through a new ADU’s subfloor will rot the sheathing and frame before you see it, and Los Angeles’s building code requires a permit when the waste line is moved or the flange is relocated. If you’re comfortable checking the flapper, do it. If the problem is structural or plumbing-permit territory, call (470) 298-9650 and we’ll put the condition in writing with the price. We’d rather you spend $0 on a second opinion than $4,000 fixing a DIY flange relocation that failed inspection.

FAQs

A new casement window over a kitchen sink

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch