Tremron Kitchen Remodeling Nationwide

Tremron Kitchen Remodeling: The Los Angeles Owner’s Guide

If you have Tremron kitchen components in your Los Angeles home and something has failed or is wearing out, we can help. A full Tremron kitchen remodel in Los Angeles typically runs $16,520-$53,100 installed, depending on scope, materials, and whether existing layout changes. Most partial replacements and component swaps land on the lower end of that range. We stock and install Tremron-compatible parts, and we write the price down before anyone picks up a tool.

Call (470) 298-9650

What usually brings Los Angeles homeowners to this page: a cabinet hinge has sheared, a drawer slide locked up, a countertop seam has opened, or a finish has worn through in the sink run. Sometimes it’s a full remodel that stalled because a contractor couldn’t source the matching Tremron profile. The specific failure matters less than the fix being done right and documented.

Which Tremron Models This Applies To

Tremron’s kitchen line spans several cabinet and surface profiles, and not every part fits every line. We’ve worked with Tremron’s slab-front and shaker profiles most often in Los Angeles kitchens, along with their laminate and solid-surface countertops. The compatibility gotcha: Tremron hardware mounting dimensions changed between the 2012 and 2018 production runs, so a hinge from a 2019 cabinet won’t always seat cleanly in a 2013 box. We verify the part number stamped inside the drawer box or on the hinge cup before ordering anything.

For OEM versus aftermarket: Tremron OEM parts match original finishes and hole patterns exactly, which matters on visible hardware. On functional parts like drawer slides and shelf pins, a quality aftermarket equivalent often performs identically at roughly 30-40% less. We’ll tell you which is which on the written quote. Rowan Construction Group is an independent contractor; we’re not affiliated with Tremron, but we stock and source across more than fifty vetted brands, so a Tremron part isn’t a dead end when the factory is slow.

If you don’t have the part number handy, measure the hinge cup diameter (35mm on older Tremron runs, 40mm on newer), the drawer slide length, and the door overlay. Those three measurements narrow it down fast.

Signs Your Tremron Kitchen Remodeling Is Failing

• Hinges sag or doors no longer sit flush. The hinge cup has worn or the mounting screws have stripped out of the particleboard box. This is the most common Tremron failure we see in Los Angeles kitchens, accelerated by humidity swings near the coast.
• Drawer slides grind or catch. The ball bearings inside the slide have flattened or the nylon rollers cracked. Once one slide fails, the drawer racks and stresses the box joinery.
• Countertop seams open near the sink. Laminate and solid-surface Tremron tops expand and contract with Los Angeles heat. A failed seam lets water into the substrate, which swells and makes the problem worse within a season.
• Edge banding peels on door and drawer fronts. The adhesive bond fails after years of heat cycling, especially on doors facing south or west windows. It starts as a small lift and spreads.
• Finish wears through on high-touch surfaces. The clear coat on Tremron’s factory finishes has a service life. Once it goes, the underlying material absorbs moisture and stains become permanent.

Before

After

Replacement Cost & What’s Included

Here’s what Tremron kitchen work costs in Los Angeles, written in dollars so you can screenshot and compare:

• Full kitchen remodel, Tremron materials: $16,520-$53,100
• Small kitchen remodel: $10,620-$23,600
• Cabinet installation (replacement or new): $4,720-$15,340
• Countertop installation: $2,360-$7,670
• Backsplash installation: $945-$2,950
• Kitchen island installation: $3,540-$11,800

The range is driven by cabinet count, countertop linear footage, whether plumbing or electrical moves, and how much of the existing layout stays. Every quote we write is a flat price with a written scope and written warranty. Under Clause 1 of the Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order. That’s how we’ve kept 4,000-plus projects within a few percent of the agreed cost since 2007.

Labor, parts, haul-away, and the documented photo record are included. The photo record isn’t an upgrade; you leave with evidence of what was found and what was done.

DIY or Call Us?

Here’s the honest split. You can safely check whether a hinge is loose versus stripped, measure your drawer slides, and confirm the part number stamped on the hardware. That information saves time on any estimate.

What you shouldn’t DIY: countertop seam repair, anything involving plumbing disconnects, or cabinet box repair where the substrate has swollen. Countertop work requires specialized adhesives and clamping that most homeowners don’t keep on hand, and a failed seam you “fixed” will fail again, usually worse. Cabinet tear-outs and reinstalls are also heavier than they look; a loaded base cabinet can weigh hundreds of pounds. If the part is structural, let a professional do it and document it. Call (470) 298-9650 and we’ll give you a written price before any work starts.

FAQs