A remodeled kitchen with a wood island, painted cabinets and a plaster range hood

Wellborn Driveway & Pavers Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansOur technicians have up to 19 years of experience
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
A new front entry door with glass sidelights
A new black aluminum pool fence with a gate
A new curved paver walkway to the front porch
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Wellborn Driveway & Pavers: The Los Angeles Owner’s Guide

Wellborn driveway and paver components in Los Angeles typically cost between $4,130 and $21,240 installed, depending on whether you’re replacing edge restraints, a section of pavers, or the entire driveway surface. We stock Wellborn-compatible paver profiles and edge systems on hand, and most section replacements are completed in a single day. Owners usually discover a paver failure the way you’d notice a loose tooth: a corner clicks underfoot, a paver rocks where it never rocked before, or water pools in a spot that used to drain clean.

Call (470) 298-9650

Los Angeles soil is the quiet culprit behind most driveway paver failures we see. The clay-heavy ground in neighborhoods like Mid-Wilshire and Baldwin Hills expands when winter rains arrive, then contracts through the dry months, shifting the sand bed beneath your pavers by fractions of an inch at a time. Over three to five years, those fractions add up to visible sagging, lippage between adjacent pavers, and edge restraints that pull away from the border. The good news is that paver driveways are modular: you replace the failed section, not the whole system, in most cases.

Rowan Construction Group is an independent contractor, not affiliated with Wellborn. We work with Wellborn-compatible materials because homeowners in Los Angeles deserve a written price and a documented record for every driveway repair, not a guess.

Which Wellborn Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Wellborn’s driveway and paver line splits into two broad families: the Estate Series, which uses a 60mm-thick paver body with a chamfered top edge, and the Metro Series, which runs thinner at 50mm and uses a squared profile. The distinction matters because edge restraints, joint sand, and base compaction depths differ between the two. If you’re replacing a single paver in an Estate Series driveway, a Metro paver will sit noticeably lower and create a trip edge.

Identifying your Wellborn paver is a matter of looking at the side profile. Flip one paver over or check the exposed edge: a chamfered top edge with a distinct bevel means Estate Series. A clean, square top edge means Metro Series. Color codes are stamped on the underside of most Wellborn pavers as a two- or three-letter code, like CH for Charcoal or SD for Sandstone. If the stamp has worn off, bring a loose paver to our Los Angeles yard and we’ll match the profile and color under daylight, because warehouse lighting lies to you about color.

On the OEM-versus-aftermarket question: Wellborn’s OEM pavers are manufactured to a tight color-batch tolerance, but older driveways have already faded from UV exposure. A brand-new OEM paver next to a five-year-old field will look like a patch. We often recommend a quality aftermarket equivalent that we can color-match to the existing weathered surface, which looks better in the short term and costs 15 to 20 percent less than OEM. If you’re under a builder warranty, OEM is the right call and we’ll document the part numbers for your claim.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Wellborn Driveway & Pavers Is Failing

  • Rocking or clicking pavers underfoot. The sand bed beneath the paver has eroded or compacted unevenly, usually from water intrusion through a failed joint. Left alone, the paver’s edges will start chipping against its neighbors every time a car rolls over it.
  • Water pooling in flat spots that used to shed water. This points to base settlement rather than surface wear. In Los Angeles, it often traces back to a broken sprinkler line or a downspout that’s been dumping water at the driveway edge for a season or two.
  • Edge restraints pulling away from the paver border. Edge restraints, the plastic or aluminum strips that hold the outside course of pavers in line, fail when the base spreads under vehicle weight. Once the restraint lets go, the outer pavers start drifting outward within weeks.
  • White, chalky residue across the paver surface. This is efflorescence, mineral salts migrating up through the paver body as moisture evaporates. It’s cosmetic rather than structural, but in Los Angeles it shows up most often on driveways that have been sealed with the wrong type of sealer for our climate.
  • Gaps between pavers wider than the width of a nickel. Joint sand has washed out, which means the pavers are now bearing on each other directly instead of through the sand cushion. Every car pass grinds paver edges against paver edges until you see spalling.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new concrete driveway with a paver border

Section replacement for a Wellborn driveway in Los Angeles runs from $4,130 for a small paver patio repair up to $12,980 for a larger section of the driveway, with full driveway replacement landing between $5,900 and $16,520. Concrete driveway work sits in the $5,310 to $14,160 range, and asphalt paving runs $4,130 to $10,620. For driveway sealing, expect $295 to $825. The price range is driven by three factors: how much of the base has failed, how many pavers need to be pulled and reset, and whether the edge restraint system needs to be replaced.

Every quote includes parts, labor, base repair, joint sand, and compaction, written as one flat number. You’ll get a written scope before we start, a signed change order before any work changes, and a photo record of the substrate condition before we put the new pavers down. Under Clause 1 of the Haven Standard, the written price comes before any work starts. That’s not a courtesy, it’s the whole arrangement.

Warranty on the work runs 365 days under the Done Right Promise: if it’s not done right, we make it right. The pavers themselves carry the manufacturer’s material warranty, which we’ll document in writing for your records.

DIY or Call Us?

What you can safely do yourself: check whether the problem is localized by walking the driveway in a grid and marking every paver that rocks or sounds hollow when tapped with a rubber mallet. Take photos of those spots, plus any areas where water pools. That’s the information we need for an accurate written quote, and it costs you nothing but twenty minutes.

Where DIY goes wrong: pulling pavers without checking the base. If you lift a paver and the sand underneath is dark, wet, or smells like soil, you have a drainage problem that resetting the surface won’t fix. Compacted base with the wrong depth is the reason most DIY paver repairs sink again within six months. The work itself isn’t high-tension or dangerous, but it’s heavy, it’s detail work, and getting the slope wrong means water running toward your foundation instead of away from it. If you want a trained set of eyes on it, call (470) 298-9650 and we’ll walk the driveway with you.

FAQs

A remodeled hall bathroom with subway tile and a floating vanity

Getting started with Rowan

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (470) 298-9650
Areas We Serve

Request a Free Estimate

Tell us what you need - Rowan Construction Group responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch